Datecs Linea TAB4 Manual de usuario
1 DATECS
Linea TAB4
User Manual
Legal Notice
“Made for iPad” mean that an electronic accesory has been designed to
connect specifically to iPad, respectively, and has been certified by the
developer to meet Apple performance standards. Apple is not
responsible fort he operation of this device or its compliance with safety
and regulatory standards. Please note that the use of this accesory with
iPad may affect wireless performance.
Compatibility
Made for
iPad (4th generation)
iPad Air
iPad Air 2
9.7-inch iPad Pro
12.9-inch iPad Pro
iPad are trademarks of Apple Inc., registered in the U.S. and other
countries. Lightning is a trademark of Apple Inc.
FCC Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
No changes shall be made to the equipment without the manufacturer’s
permission as this may void the user’s authority to operate the equipment
Exposure to Radio Frequency (RF) Signals
The LineaTab, incorporating the iPad, has been tested and meets applicable
limits for radio frequency (RF) exposure. Specific Absorption Rate (SAR) refers to
the rate at which the body absorbs RF energy. The SAR limit is 1.6 watts per
kilogram averaged over 1 gram of tissue.
During testing, the iPad devices, incorporated within the LineaTab, are set to
their highest transmission levels and placed in positions that simulate use near
the body.
Cases with metal parts may change the RF performance of the device, including
its compliance with RF exposure guidelines, in a manner that has not been
tested or certified.
The LineaTab complies with the FCC safety requirements for RF exposure in
accordance with FCC rule part §2.1093 and KDB447498 D01 for portable use
conditions.
The LineaTab, incorporating the iPad, must not be co-located or operated in
conjunction with any other antenna or transmitter.
Overview
Features:
Battery: Rechargeable Li-ion Battery - 1100 mAh,
Charging via USB to computer
Charging via Power Station
Magnetic Card Reader – 3-Track Head:
Swipe Speed: Minimum of 1.97 in/sec
MTBF: 1 million swipes
Bidirectional reading capabilities
Barcode Scanner - Class II - 1D/2D Imager:
Single / Multi-scan mode
1D - MTBF: 30K hours
(Laser Diode & Mirror Unit 10K hours)
2D - MTBF: 50K hours
Indicators: Visual: 2 LEDs for device status
I/O Connectors: 9-pin Lightning connector
10-pin female Mini-B USB connector for charging
and synchronization
External RS connector
Technical Data
Processor 32-bit ARM
TM
Cortex
TM
- M3 based Microcontroller
Magnetic Card Reader
(option)
• 3-track bi-directional reading
• ISO 7810, 7811 and 7813
Secure Magnetic Card
Reader
(option)
• PCI PTS 3.x certified
• DUKPT and Fixed Key Management
• 3DES-112, AES-128, AES-256 encryption algorithms
Contactless Card
Reader
(option)
ISO/IEC 14443 Type-A/MIFARE:
- MIFARE MINI
- MIFARE CLASSIC-1K, MIFARE CLASSIC-4K
- MIFARE ULTRALIGHT, ULTRALIGHT-C
- MIFARE PLUS 2K/4K
- MIFARE DESFire
- and other
ISO/IEC 14443 Type-B:
- supports most of the cards
ISO/IEC 15693:
- supports most of the cards
1D • Opticon MDL1000* - Laser Barcode Scan Engine
Barcode Reader
(option) 2D
• Newland EM3070* - Image Sensor 752x480 CMOS, High Performance 2D
Imager Scan Engine
• Intermec EA-30 - Image Sensor 752x480 CMOS, High Performance 2D
Imager Scan Engine
• Opticon MDI3100 - Image Sensor 752x480 CMOS, High Performance 2D
Imager Scan Engine
Supported Barcode
Types
• 1D* Barcode Scanner Supported Symbologies:
JAN/UPC/EAN incl. add on, Codabar/NW-7, Code 11, Code 39, Code 93, Code 128, GS1-
128(EAN-128), GS1 DataBar (RSS), IATA, Industrial 2of5, Interleaved 2of5, ISBN-ISMN-
ISSN, Matrix 2of5, MSI/Plessey, S-Code, Telepen, Tri-Optic, UK/Plessey
Postal code: Chinese Post, Korean Postal Authority code
Composite codes, MicroPDF417, PDF417
• 2D* Imager Supported Symbologies:
Code 128, EAN-13, EAN-8, Code 39, UPC-A, UPC-E, Codabar, Interleaved 2 of 5, ITF-6,
ITF-14, ISBN, Code 93, UCC/EAN-
128, GS1 Databar, Matrix 2 of 5, Code 11, Industrial 2 of
5, Standard 2 of 5, Plessey, MSI-Plessey
PDF417, Data Matrix (ECC200, ECC000, 050, 080, 100, 140), QR Code
Battery Rechargeable Li-Ion Battery 3.7V / 1100 mAh
Connectivity
• Apple 9 pin connector
• Pass-through sync through mini USB
• BT 2.0 Class 2 (option)
- SPP - Serial Port Profile
• External serial port
Device compatibility iPad (4th generation), iPad Air, iPad Air 2, 9.7-inch iPad Pro, 12.9-inch iPad Pro
Buttons 2 scan buttons
LED indication 2 LEDs for battery and device status
Audio indication Electro - Magnetic Buzzer
Weight, g 115 with battery and 2D barcode reader (without iPad)
Dimensions (LxWxH),
mm 128 x 51 x 45
Environmental • Operating: -10oC to +40oC / 35 to 85% RH
• Storage: -20oC to +50oC / 10 to 90% RH
Power Supply • 5V through mini USB
• 5V through single or 5 station charger
Accessories
• Single station charger - SC-1
• 5 stations charger - GC-5
• Holster
• Stand
Table 1
* Specifications subject to change without notice.
Box Contents
Your Linea Tab comes with the following items listed below:
Item Part Number Descriptions Image
1 Linea Tab4 Linea Tab4 Reader /
Scanner
2 USB A to mini
B USB USB sync cable
3 Linea Tab
User Manual User's manual
Table 2
*Bulk Shipments may ship without cables and manuals in each box.
Getting Started
Device overview
Fig. 1
Fig. 2
The Linea Tab allows you to scan barcode and capture
Magnetic Strip information onto your iPad4. Before using your Linea
Tab the battery should be properly charged. The following Quick Start
guide will help to get your Linea Tab ready for use.
Quick Start:
Step What to do Purpose Where to find more
information
1
Fully charge your
Linea Tab4 as
recommended.
The battery pack
should be fully
charged before use
to ensure long
battery life.
Charging Battery,
Page 10.
2
Install Software.
Barcode Scanning
& Card Reading
requires software
to be installed on to
your iPad4
Please contact your
distributor, Pages 12
to Page 15
3
Attach device to
IPad4.
Connecting your
Linea Tab and
iPad4.
Page 11.
Table 3
Charging Battery
Charging the Linea Tab:
The Linea Tab4 uses a Lithium-Ion rechargeable battery pack.
Before first use, the battery pack should be charged for at least (4)
hours.
To prevent electrical damage to the Linea Tab4 and/or battery
pack, please use approved USB to Mini USB cables only.
Fig. 3
InfineaTAB4 can be charged from USB port or Datecs power
station. When the InfineaTAB4 is charging, green led is blinking (LED2).
When the device is fully charged, greed led is continuously light (stop
blinking).
Charging via USB cable
(type A to mini USB), connected
to PC 5V/260mA
Tabla de contenidos
Otros manuales de Accesorios para tabletas de Datecs
Manuales populares de Accesorios para tabletas de otras marcas
Bretford
Bretford PowerRack 10 Manual de usuario
Brenthaven
Brenthaven EDGE 360 Manual de usuario
Fujitsu
Fujitsu Stylistic 3400 Manual de usuario
Heckler Design
Heckler Design WindFall STAND Manual de usuario
Kensington
Kensington KeyFolio SecureBack Manual de usuario
Xplore
Xplore Companion Keyboard Manual de usuario
Logitech
Logitech Ultrathin Manual de usuario
Infinite Peripherals
Infinite Peripherals INFINEA X MINI Manual de usuario
Trust
Trust Executive Folio Stand Manual de usuario
Manhattan
Manhattan 406017 Manual de usuario
Logitech
Logitech SLIM COMBO Manual de usuario
Logitech
Logitech AnyAngle iC1051 Manual de usuario