Datalogic POWERSCAN 7000 2D Imager Manual de usuario

Installing the Stand

1. Determine the best location to position the stand. Some considerations are:

• Proximity to the host. Verify that the stand will be placed within a reasonable distance of the host, and that any

cabling can be routed between the devices without kinking, stretching or exposing cabling to tampering or other

potential damage.

• Stability. Avoid positioning the stand in such a way as to subject it to excess vibration, bumping, spillage, etc.

• Ergonomics. Ensure the user can easily adjust the angle of the imager to maximize comfort and efficiency.

2. The stand’s weighted base and traction “feet” allow it to be a stable freestanding unit, however, if you wish to perma-

nently attach it to a table or countertop, use the template provided to locate and mark the position of the screw holes

needed to secure the stand.

Using the Stand

Seat the imager in the holder as shown and route cabling as necessary. For Scan Stand Mode, adjust the

flexible gooseneck to aim the imager at the Scan Stand Symbol located on the stand’s base. The unit will

remain idle as long as it sees the Scan Stand symbol. When a different bar code is presented, the Imager

is activated to read the new code.

Alternatively, when the stand is used in Presentation Mode, the imager can be pointed in any direction

desired. For example, it might be pointed outwards to accomodate larger items.

Use in

Scan

Stand

Mode

Use in

Presentation

Mode

Hands Free Stand

(Screws

optional)

(Screws

optional)

Scan Stand Symbol

Instructions

Hands Free Stand

PowerScan

7000 2D

Selecting the Scan Mode

To configure the imager for use with or without the Hands Free Stand, read the descriptions below and

scan the programming bar code associated with the desired mode.

Scan Stand Mode and Presentation Mode are referred to as “hands free” modes. If the imager’s trigger is

pulled when using a hands free mode, the imager changes to manual trigger mode for a configurable

duration which can be set using the Product Reference Guide1(PRG). Once the time-out value is reached,

(if there have been no further trigger pulls) the imager reverts to the original hands free mode.

Scan Stand Mode

When a unit is in Scan Stand Mode, the LEDs shine at the Scan Stand Symbol2on the base of the stand

which tells it to remain idle. When the Scan Stand Symbol is blocked from the imager’s view, the imager

turns the LEDs on at the configured power level (Default High) and attempts to find and decode bar codes

in its field of view.

NOTE

The imager automatically adjusts the illumination LEDs

to the lowest light level possible to maintain a good lock

on the Scan Stand Symbol. When a bar code is presented,

the imager’s light levels adjust to the saved setting. See

the Product Reference Guide1(PRG) if you wish to pro-

gram the LED Power Level.

Presentation Mode

This programs the imager to work in Presentation Mode, which does not require the imager to be pointed

at the Scan Stand Symbol. When an imager is in Presentation Mode, the LEDs can be configured to turn

off immediately after a bar code is decoded or to stay on and continue scanning for a short time after.

See the PRG1for advanced programming options for this feature.

Manual/Serial Trigger Mode

Select this mode when you are removing the imager from service with the stand. When in this mode, you

can activate the imager either by pressing the trigger, or using a serial trigger command, depending upon

advanced options that have been set using the PRG1.

• Manual Trigger Mode — The imager scans until a bar code is read, or until the trigger is released.

• Serial Mode — The imager scans until a bar code has been read or until the deactivate command is sent.

1. The Product Reference Guide and other manuals for this product are available for download from the website: www.data-

logic.com.

2. If the Scan Stand Symbol becomes damaged or otherwise unusable, contact your dealer to acquire a replacement label.

Select Scan Stand Mode

Select Presentation Mode

Select Manual/Serial Trigger Mode

Screw Location Template

100mm

Otros manuales para POWERSCAN 7000 2D Imager

Tabla de contenidos

Otros manuales de Lector de código de barras de Datalogic

Datalogic

Datalogic Gryphon I GBT4130 Manual de usuario

Datalogic

Datalogic DV9500 Series Manual de usuario

Datalogic

Datalogic Gryphon I GBT4400 2D Manual de usuario

Datalogic

Datalogic QuickScan QBT21 1 Series Manual de usuario

Datalogic

Datalogic Heron HD3130 Manual de instalación y operación

Datalogic

Datalogic Touch TD1100 Family Manual de usuario

Datalogic

Datalogic Matrix 320 Manual de instalación y operación

Datalogic

Datalogic Lynx Manual de usuario

Datalogic

Datalogic QuickScan QM2400 Manual de usuario

Datalogic

Datalogic PowerScan Series Manual de instalación y operación

Datalogic

Datalogic DRAGON D101 Manual de usuario

Datalogic

Datalogic Gryphon GM44 Series Manual de usuario

Datalogic

Datalogic Gryphon D412Plus Manual de instalación y operación

Datalogic

Datalogic FireScan D131 Manual de usuario

Datalogic

Datalogic DX8200A-3002 Manual de usuario

Datalogic

Datalogic JOYA X2 Manual de usuario

Datalogic

Datalogic BC9 0-BT Series Manual de usuario

Datalogic

Datalogic QuickScan L QD 2300 Manual de usuario

Datalogic

Datalogic QuickScan QD24 series Manual de instalación y operación

Datalogic

Datalogic Gryphon I GD44XX Manual de instalación y operación

Datalogic

Datalogic Gryphon M 00 Series Manual de usuario

Datalogic

Datalogic PowerScan 9100 Series Manual de instalación y operación

Datalogic

Datalogic Gryphon GM4102 Manual de usuario

Datalogic

Datalogic Cobalto CO5330 Manual de instalación y operación

Manuales populares de Lector de código de barras de otras marcas

POSMicro

POSMicro Datalogic PowerScan D7100 Manual de usuario

Marson

Marson MT780 Guía de configuración rápida

NCR

NCR RealPOS Manual de usuario

Motorola

Motorola SE3300 Guía de configuración rápida

Element

Element P130BT Manual de usuario

Motorola

Motorola Symbol LS3008 Manual de instalación y operación

Meec tools

Meec tools OBD-II / VAG Manual de usuario

SICK

SICK CLP 100 Manual de usuario

Royal Tag SA

Royal Tag SA I-Read Manual de usuario

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manual de usuario

Meteor

Meteor 8310 Manual de usuario

Denso

Denso BHT-500B Manual de usuario

Motorola

Motorola MP6000 Instrucciones de montaje

Newland

Newland NLS-HR15-BT Manual de usuario

ARTDEV

ARTDEV AS-1310 Manual de usuario

Aopos

Aopos AS290 Manual de usuario

ENS

ENS 367-5455 Manual de usuario

Atid

Atid AT188N Plus Manual de usuario