Datalogic Matrix 450 Manual de usuario

Matrix 450™ + LT-03X

QUICK REFERENCE GUIDE

NOTE

This manual illustrates a Stand Alone application. For other types of

installations, such as ID-NET™, and for a complete reader configuration using

the VisiSet™ configuration program, refer to the Matrix 450™ Reference

Manual available on the mini-DVD and also downloadable from the Web at

www.automation.datalogic.com.

821000250

MATRIX 450™ QUICK REFERENCE GUIDE

UPDATES AVAILABILITY

UK/US The latest drivers and documentation updates for this product are available on Internet.

Log on to: www.automation.datalogic.com

ISu Internet sono disponibili le versioni aggiornate di driver e documentazione di questo

prodotto. Collegarsi a: www.automation.datalogic.com

FLes versions mises à jour de drivers et documentation de ce produit sont disponibles sur

Internet. Cliquez sur : www.automation.datalogic.com

DIm Internet finden Sie die aktuellsten Versionen der Treiber und Dokumentation von

diesem Produkt. Adresse : www.automation.datalogic.com

EEn Internet están disponibles las versiones actualizadas de los drivers y documentación

de este producto. Dirección Internet : www.automation.datalogic.com

SERVICES AND SUPPORT

Datalogic provides several services as well as technical support through its website. Log on to

www.automation.datalogic.com and click on the links indicated for further information:

PRODUCTS

Search through the links to arrive at your product page which describes specific Info, Features,

Applications, Models, Accessories, and specific Downloads.

DOWNLOAD > PRODUCT LITERATURE > SW&UTILITIES

The VisiSet™ utility program, which allows device configuration using a PC can be downloaded

from this page. It provides RS232 and Ethernet interface configuration.

SERVICE

- Overview - Technical Support, Maintenance Agreements and Warranty Extensions

- Repair Centers

- Helpdesk

- Material Return Authorization

LEGAL NOTICES

U.S. and international laws. Copying, or altering of this document is prohibited without express written

consent from Datalogic Automation S.r.l.

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries,

including the U.S.A. and the E.U.

Matrix 450, ID-NET, VisiSet and X-PRESS are trademarks of Datalogic Automation S.r.l. All other

brand and product names mentioned herein are for identification purposes only and may be

trademarks or registered trademarks of their respective owners.

Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for

incidental or consequential damages resulting from the use of this material.

MATRIX 450™ QUICK REFERENCE GUIDE

STEP 1 – ASSEMBLE THE READER

The first step to perform is to assemble the accessories that make up the Matrix 450™

reader. The lens and lighting system or external illuminator must be used. This procedure

shows an LT-03x lighting system.

CAUTION

Matrix 450™ must be disconnected from the power supply during this

procedure.

1. In a dust-free environment, remove the Matrix 450™ Lens Cover by unscrewing it.

CAUTION

Do not touch the sensor aperture, lens glass or lens cover glass. These

areas must be kept clean. Avoid any abrasive substances that might

damage these surfaces during cleaning.

2. Remove the sensor protection label by pulling it off of the base.

3. Mount the LNS-12xx lens by slowly screwing it onto the base until it arrives at the

mechanical stop.

NOTE

The lens mount is equipped with a special slip mechanism and together

with the LT-03x design facilitates the focusing procedure during installation,

for example if the locking knobs on the lens are obstructed by the body of

the illuminator. See note in Step 4 "Focusing the Reader" or Step 8.

Figure 1 – Assembling Matrix 450™ and LNS-12xx Lens

NOTE

The anti-vibration components are already mounted to all Datalogic

LNS-12xx Lenses.

4. To keep dust and dirt off of the lens during mounting, temporarily replace the lens cover.

Locking Knobs Lens Cover

anti-vibration components

(see note below)

Protective Film

(remove before calibration)

Matrix 450™ Base

MATRIX 450™ QUICK REFERENCE GUIDE

Figure 2 – Assembling Matrix 450™ to LT-03x

NOTE

The mating bracket can be mounted in the reverse direction to create a

compact version of the Matrix 450™ + LT-03x assembly. The compact

assembly however will reduce access to the lens for the focusing procedure.

REQUIRED ACCESSORIES

The following table shows the correct lens/illuminator combinations to be used for Matrix

450™ imager assembly.

Lenses Illuminators

93ACC0041 LNS-1216 16 mm C-Mount Lens 5MP

with anti-vibration components 93A400034 LT-032 ULTRA POWER LT NARROW BLUE 40°

93A400032 LT-030 ULTRA POWER LT SUPERNARROW

BLUE 20°

93A400033 LT-031 ULTRA POWER LT SUPERNARROW

WHITE 20°

93ACC0034 LNS-1225 25 mm C-Mount Lens 5MP

with anti-vibration components

93A400034 LT-032 ULTRA POWER LT NARROW BLUE 40°

93A400032 LT-030 ULTRA POWER LT SUPERNARROW

BLUE 20°

93ACC0035 LNS-1235 35 mm C-Mount Lens 5MP

with anti-vibration components 93A400033 LT-031 ULTRA POWER LT SUPERNARROW

WHITE 20°

93A400032 LT-030 ULTRA POWER LT SUPERNARROW

BLUE 20°

93ACC0036 LNS-1250 50 mm C-Mount Lens 5MP

with anti-vibration components 93A400033 LT-031 ULTRA POWER LT SUPERNARROW

WHITE 20°

MATRIX 450™ QUICK REFERENCE GUIDE

STEP 2 – CONNECT THE SYSTEM

In the typical standalone layout shown in the figure below a serial host is connected to the

Matrix 450™ + LT-03x. The reader operates in One Shot or Phase Mode and can use an

external trigger to signal image acquisition.

The CBX is used to facilitate the connection between the Matrix 450™ + LT-03x assembly

and the serial host interface, external trigger, serial aux configuration, and optional input and

output devices.

Matrix 450™ Standalone Layout to Serial Host

Power Supply Connection

Use the PG-120 power Kit (3 versions for European, UK or US plug) and CAB-PG-0002

+ BA400 connector to connect the PG-120 to the CBX. An alternative power supply to the

PG-120 is the PWR-120.

CBX Connection

Use CAB-LP-0x to supply power from the CBX to the LT-03x. Connect Brown/White

wires to Vdc and Black/Blue wires to GND. Connect the cable shield to Earth ground.

Use CAB-MS0x between Matrix 450™ and the CBX for: power, serial host, external

trigger device (photocell), serial aux, additional I/O connections.

Optionally: use the CAB-GE0x for the Gigabit Ethernet connection towards a remote host

or Datalogic WebSentinel™ monitoring station.

Matrix 450™ LT-03x Connection

Use the CAB-LD-102 (no power) cable (provided with the LT-03x), to connect the

communication signals between the Matrix 450™ and the LT-03x while isolating the

power. Through the CBX internal power switch you can control power to the Matrix 450™

independently from the LT-03x.

NOTE

Matrix 450™ does not support sourcing power towards the CBX in order to

power I/O devices. These devices must be powered through the CBX or

from an external source.

CAB-GE0x (to Remote Host or

Datalogic WebSentinel™ Monitor)

CAB-PG-0002

+ BA400

CAB-MS0x

CAB-LP-0x

CAB-LD-102

(no power)

Serial Host

PG-120

Ext. Trigger

CBX500

AUX (Matrix 450™

configuration)

I/O

MATRIX 450™ QUICK REFERENCE GUIDE

Alternatively, Matrix 450™ + LT-03x can be connected directly to an Ethernet host through

the Gigabit Ethernet connection (CAB-GE0x). If an external trigger is not necessary, the

layout is simplified. The LT-03x is powered directly from the PG-120 through the CAB-PG-

0105 cable. The CAB-LD-002 (with power) cable (provided with the LT-03x), is used to

supply power to the Matrix 450™ from the LT-03x.

Matrix 450™ Standalone Layout to Ethernet Host

Matrix 450™ + LT-03x can also be used in an ID-NET™ Master/Slave configuration. See the

Matrix 450™ Reference Manual for details, including power supply recommendations.

NOTE

If using separate power sources for LT-03x and Matrix 450™, make sure

that LT-03x is powered up before Matrix 450™ in order to be correctly

recognized.

CAB-GE0x

CAB-PG-0105

CAB-LD-002

(with power)

PG-120

Ethernet Host

(Data collection +

Matrix 450™ configuration)

MATRIX 450™ QUICK REFERENCE GUIDE

CBX100/CBX500 Pinout for Matrix 450™

The table below gives the pinout of the CBX100/CBX500 terminal block connectors. Use this

pinout when the Matrix 450™ reader is connected by means of the CBX100/CBX500:

CBX100/500 Terminal Block Connectors

Input Power Outputs

Vdc Power Supply Input Voltage + +V Power Source - Outputs

GND Power Supply Input Voltage - -V Power Reference - Outputs

Earth Protection Earth Ground O1+ Output 1 +

O1- Output 1 -

Inputs O2+ Output 2 +

+V Power Source – External Trigger O2- Output 2 -

I1A External Trigger A (polarity insensitive) Auxiliary Interface

I1B External Trigger B (polarity insensitive) TX Auxiliary Interface TX

-V Power Reference – External Trigger RX Auxiliary Interface RX

+V Power Source – Inputs SGND Auxiliary Interface Reference

I2A Input 2 A (polarity insensitive) ID-NET™

I2B Input 2 B (polarity insensitive) REF Network Reference

-V Power Reference – Inputs ID+ ID-NET™ network +

Shield ID- ID-NET™ network -

Shield Network Cable Shield

Main Interface

RS232 RS485 Full-Duplex RS485 Half-Duplex

TX TX+ RTX+

RTS TX- RTX-

RX *RX+

CTS *RX-

SGND SGND SGND

* Do not leave floating, see Reference Manual for connection details.

CAUTION

Do not connect GND, SGND and REF to different (external) ground

references. GND, SGND and REF are internally connected through filtering

circuitry which can be permanently damaged if subjected to voltage drops

over 0.8 Vdc.

MATRIX 450™ QUICK REFERENCE GUIDE

STEP 3 – MOUNT AND POSITION THE READER

1. To mount the Matrix 450™ + LT-03x assembly, use the L-shaped mounting bracket to

obtain the most suitable position for the reader. The most common mounting

configurations are shown in the figure below. Other mounting solutions are provided in

the Matrix 450™ Reference Manual.

Figure 3 –Positioning with LT-03x L-shaped Mounting Bracket

CAUTION

Do not mount the Matrix 450™ + LT-03x assembly with the Matrix 450™

body mounting bracket accessory. The body mounting bracket is not

designed to support the LT-03x.

2. When mounting the Matrix 450™ + LT-03x assembly, take into consideration these three

ideal label position angles: Pitch or Skew 10° to 20° and Tilt 0°, although the reader can

read a code at any tilt angle. Assure at least 10° Pitch or Skew to avoid direct illuminator

light reflection which will reduce performance.

3. Refer to the Reading Diagrams to determine the correct reading distance according to

your application requirements.

NOTE

Rapid Configuration of the Matrix 450™ reader can be made either through

the X-PRESS™ interface (steps 4-6) which requires no PC connection, or

by using the VisiSet™ Setup Wizard (steps 7-8). Select the procedure

according to your needs.

Both the X-PRESS™ interface and the VisiSet™ Setup Wizard are easy setup methods valid

for single code applications with uniform labels that do not require reading at the extreme

ends of the reading ranges shown in the diagrams.

For advanced applications including those that operate at the extreme ends of the reading

ranges, use the VisiSet™ Calibration Tool. See the Help On Line for more details.

Pitch

Tilt

Pitch

Tilt

MATRIX 450™ QUICK REFERENCE GUIDE

STEP 4 – FOCUS THE READER

Matrix 450™ provides a built-in tool called Blue Diamonds™ to aid focusing the reader. The

Blue Diamonds™ are accessed through the X-PRESS™ Interface.

1. Remove the lens cover in order to focus the reader.

2. Prepare the correct accessory lens for your application:

NOTE

Once the lens is fully tightened to the mechanical stop (Step 1), it can be

rotated counterclockwise (up to one full turn without loosening the lens), so

that the diaphragm scale and locking knobs can be easily accessed from

behind the LT-03x.

a. Remove the anti-vibration o-ring from the two Locking Knobs on the lens and loosen

them.

b. Adjust the Focus ring to the "Far position" and the Diaphragm ring to the "F2.8"

number setting which is the preferred setting for installation using the X-PRESS™

interface.

3. Power the reader on. During the reader startup (reset or restart phase), all the LEDs

blink for one second. On the connector side of the reader near the cable, the “POWER

ON” LED (blue) indicates the reader is correctly powered.

4. Enter the Focus function by pressing and holding the X-PRESS™ push button until the

Focus LED is on.

Figure 4 – X-PRESS™ Interface: Focus Function

5. Release the button to enter the Focus function. The Blue Diamonds™ and laser pointers

turn on.

NOTE

If the reading surface is too dark, in order to increase the contrast, it may be

helpful to place a piece of white paper at the Blue Diamonds™ positions to

see them better.

The procedure is as follows:

a. At the correct reading distance (see the Reading Diagrams in this Quick Reference

Guide), adjust the Focus ring towards the "Near position" until the Blue Diamonds™

are perfectly in focus, see Figure 5.

b. At long focal distances a "skew" angle may cause a noticeable difference in focus

between the two diamonds, in this case select the best possible focus (both diamonds

slightly out of focus). Tighten the Focus Locking Knob.

c. Set the Diaphragm to the aperture stop (F-number) stated in the conditions relative to

the selected reading diagram and then tighten the Diaphragm Locking Knob.

d. Replace the anti-vibration o-ring onto the two Locking Knobs.

NOTE

If necessary you can use the Fine Focusing Tool in the VisiSet™ Setup

Wizard for fine focusing. See Step 8.

READY

SETUP

FOCUS

TEST LEARN

GOODTRIGGERCOMSTATUS

red yellow yellow green green

MATRIX 450™ QUICK REFERENCE GUIDE

Figure 5 – Focus Function Using Blue Diamonds™

6. Exit the Focus function by pressing the X-PRESS™ push button once. The Blue

Diamonds™ turn off.

7. Replace the lens cover, screwing it tightly to the base.

STEP 5 – CALIBRATE IMAGE DENSITY

In order to function correctly to the fullest extent of its capabilities, Matrix 450™ must acquire

information regarding image density or PPI (pixels per inch). This calibration takes place

through the X-PRESS™ Interface and the Focusing and PPI Setup Chart included in the

package. This procedure is necessary for the first time installation, if the lens type is changed

or if the focal distance is changed.

Locate

1. Enter the Focus function by pressing and holding the X-PRESS™ push button until the

Focus LED is on.

2. Release the button to enter the Focus function. The Blue Diamonds™ and laser pointers

turn on.

Figure 6 – X-PRESS™ Interface: Locate Function

3. From the Focusing and PPI Setup Chart, position the 1 mm code at the center of the

Horizontal FOV (aligned with the laser pointers).

Figure 7 –Aligning the Focusing and PPI Setup Chart Using Laser Pointers as Reference

4. Exit the Focus function by pressing the X-PRESS™ push button once. The Blue

Diamonds™ and laser pointers turn off.

Your reader can have one of the

above types of Blue Diamonds™.

Blue Diamond™

in focus

FOV

READY

SETUP

FOCUS

TEST LEARN

GOODTRIGGERCOMSTATUS

red yellow yellow green green

Otros manuales para Matrix 450

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Lector de código de barras de Datalogic

Datalogic

Datalogic PowerScan 9500 Series Manual de instalación y operación

Datalogic

Datalogic FireScan D131 Manual de usuario

Datalogic

Datalogic Magellan 1500i Manual de usuario

Datalogic

Datalogic Gryphon I GD44 Series Manual de usuario

Datalogic

Datalogic Magellan 3300HSi Manual de usuario

Datalogic

Datalogic QuickScan L QD 2300 Manual de usuario

Datalogic

Datalogic Magellan 800i Manual de usuario

Datalogic

Datalogic PowerScan PM9100 Series Manual de usuario

Datalogic

Datalogic PowerScan PD953X Manual de usuario

Datalogic

Datalogic PowerScan D8330 Manual de usuario

Datalogic

Datalogic QW2120 Manual de usuario

Datalogic

Datalogic MAGELLAN 1000I Manual de instalación y operación

Datalogic

Datalogic F725-E SERIES Manual de usuario

Datalogic

Datalogic OM-DRAGON Series Manual de usuario

Datalogic

Datalogic DS1100 SH2347 Manual de usuario

Datalogic

Datalogic QuickScan Lite QW2400 Manual de instalación y operación

Datalogic

Datalogic Quickscan QD2200 Manual de instalación y operación

Datalogic

Datalogic Gryphon I GD44XX Manual de usuario

Datalogic

Datalogic Lynx D Manual de usuario

Datalogic

Datalogic POWERSCAN SR Manual de usuario

Datalogic

Datalogic S5N-PH Series Manual de usuario

Datalogic

Datalogic DS6500 Series Manual de usuario

Datalogic

Datalogic Magellan 1100i Manual de instalación y operación

Datalogic

Datalogic Gryphom 4500 Series Manual de instalación y operación

Manuales populares de Lector de código de barras de otras marcas

POSMicro

POSMicro Datalogic PowerScan D7100 Manual de usuario

Marson

Marson MT780 Guía de configuración rápida

NCR

NCR RealPOS Manual de usuario

Motorola

Motorola SE3300 Guía de configuración rápida

Element

Element P130BT Manual de usuario

Motorola

Motorola Symbol LS3008 Manual de instalación y operación

Meec tools

Meec tools OBD-II / VAG Manual de usuario

SICK

SICK CLP 100 Manual de usuario

Royal Tag SA

Royal Tag SA I-Read Manual de usuario

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manual de usuario

Meteor

Meteor 8310 Manual de usuario

Denso

Denso BHT-500B Manual de usuario

Motorola

Motorola MP6000 Instrucciones de montaje

Newland

Newland NLS-HR15-BT Manual de usuario

ARTDEV

ARTDEV AS-1310 Manual de usuario

Aopos

Aopos AS290 Manual de usuario

ENS

ENS 367-5455 Manual de usuario

Atid

Atid AT188N Plus Manual de usuario