Datalogic BC9030 Manual de usuario
BC9030 BT Presentation Base
Quick Reference Guide
Datalogic USA, Inc.
959 Terry Street
Eugene, OR 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
©2016-2017 Datalogic S.p.A. and/or its affiliates
All rights reserved. Without limiting the rights under copyright, no part of
this documentation may be reproduced, stored in or introduced into a retrieval
system, or transmitted in any form or by any means, or for any purpose, with-
out the express written permission of Datalogic S.p.A. and/or its affiliates.
Owners of Datalogic products are hereby granted a non-exclusive, revocable
license to reproduce and transmit this documentation for the purchaser's own
internal business purposes. Purchaser shall not remove or alter any propri-
etary notices, including copyright notices, contained in this documentation and
shall ensure that all notices appear on any reproductions of the documenta-
tion.
Should future revisions of this manual be published, you can acquire printed
versions by contacting your Datalogic representative. Electronic versions may
either be downloadable from the Datalogic website (www.datalogic.com) or
provided on appropriate media. If you visit our website and would like to make
comments or suggestions about this or other Datalogic publications, please let
us know via the "Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this man-
ual that is complete and accurate, however, Datalogic reserves the right to
change any specification at any time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A.
in many countries, including the U.S. and the E.U. PowerScan is a trademark of
Datalogic S.p.A. and/or its affiliates, registered in many countries, including
the U.S. and the E.U. The Bluetooth word mark and logos are owned by Blue-
tooth SIG, Inc. and any use of such marks by Datalogic Group companies is
under license. All other brand and product names may be trademarks of their
respective owners.
Patents
See www.patents.datalogic.com for patent list.
.
See the Regulatory Addendum included with your
product for additional regulatory, safety and legal
information.
Table of Contents
Using the BC9030 BT Presentation Base ..................................................... 1
Installation ....................................................................................................... 2
Regulating the Cradle Position .............................................................. 2
Mounting with the Metal Plate ............................................................. 4
System Connections ....................................................................................... 5
Connecting and Disconnecting the Interface Cable ............................ 5
BC9030-BT-BP Configuration ........................................................................ 6
Datalogic Aladdin™ .................................................................................. 6
Serial Configuration ................................................................................ 7
Configuration Bar Codes ........................................................................ 7
Resetting Standard Product Defaults .................................................. 7
Selecting the Interface Type .......................................................................... 8
Configuring the Interface ............................................................... 8
Keyboard Interface ....................................................................... 10
Scancode Tables............................................................................ 11
Country Mode ........................................................................................ 12
Caps Lock State ..................................................................................... 16
Numlock ................................................................................................. 17
Technical Features ........................................................................................ 18
Datalogic Limited Factory Warranty ........................................................... 20
Ergonomic Recommendations .................................................................... 21
Support Through the Website ..................................................................... 22
Quick Reference Guide
1
Using the BC9030 BT Presentation Base
The BC9030 BT Presentation Base, when paired with one or more PowerScan™
PM9500 readers, builds a Cordless Reading System for the collection, decod-
ing and transmission of bar code data. It can be connected to a Host PC via
RS-232, USB, or KBD Wedge, and is suited for single-cradle layouts.
The label on the cradle contains LED indicators and a multi-function button.
The LEDs signal the BC9030-BT-BP
status, as shown.
LED STATUS
Aux Yellow On = BC9030-BT-BP is powered through an external
power supply.
Host Yellow On = BC9030-BT-BP is powered by the Host.
Reader
Green On = the reader battery is completely charged.
Red On = the reader battery is charging.
Orange Blinking = reader battery fault - replace battery.
Red / Green Alternatively Blinking = charging error - see PRG.
Off = reader not in the cradle or not properly inserted.
Radio Yellow Blinking = radio activity.
Installation
2BC 9xx0-BT Cradle
Installation
To set up your BC9030-BT-BP cradle you must:
1. Physically install the cradle.
2. Make all system connections.
3. Configure the BC9030-BT-BP cradle.
The cradle package contains the following items:
Regulating the Cradle Position
To regulate the position, use the hex key to unscrew the holder and slide it to
the desired position.
• BC9030 BT Presentation Base • Hex Key
• BC9030-BT-BP Quick Reference Guide
(this manual) • Rubber Spacers
• Metal Mounting Plate
Installation
Quick Reference Guide 3
The rubber spacers included in the box can be used to fix the position of the
cradle:
Installation
4BC 9xx0-BT Cradle
Mounting with the Metal Plate
1. Affix the metal plate onto the desired mounting surface using the
two center screw holes (see Figure 1 on page 4).
2. Slide the tabs on the back of the cradle onto the metal plate as
shown in Figure 1.
3. After aligning the tabs, push up to lock into place.
Figure 1. Mounting Plate on Wall
System Connections
Quick Reference Guide 5
System Connections
The BC9030-BT-BP cradle provides a multi-interface connector and a power
supply connector as shown:
Connecting and Disconnecting the Interface Cable
The BC9030-BT-BP can be connected to a Host by means of a multi-interface
cable, which must be simply plugged into the Host connector, visible on the
front panel of the cradle.
To disconnect the cable, insert a paper clip or other similar object into the hole
corresponding to the Host connector on the body of the cradle. Push down on
the clip while unplugging the cable. Refer to the following figure:
CAUTION
Connections should always be made with power off!
Power Supply
Multi-Interface
Connector
Connecting/Disconnecting the Cable
BC9030-BT-BP Configuration
6BC 9xx0-BT Cradle
RS-232
USB
BC9030-BT-BP Configuration
The BC9030-BT-BP configuration can be performed in three ways: by using
the Datalogic Aladdin™software configuration program, by sending configura-
tion strings from the Host PC via the RS-232 or USB-COM interface or by
reading configuration bar codes with the PowerScan™ PM9500 reader.
Datalogic Aladdin™
Datalogic Aladdin™is a multi-platform utility program that provides a quick
and user-friendly configuration method via the RS-232/USB-COM interface.
It also allows upgrading the software of the connected device (see the Data-
logic Aladdin™ Help On-Line for more details).
NOTE
The power supply is required only if you need to connect the interface
cable to a standard USB Port. The power supply is not required if you
connect the interface cable to a PoweredUSB 12V or 24V port.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Accesorios de Datalogic
Datalogic
Datalogic S5N-PA W Series Manual de usuario
Datalogic
Datalogic SG4 Extended Manual de usuario
Datalogic
Datalogic SG4-RB2-050-OO-W Manual de usuario
Datalogic
Datalogic S5N-M Series Manual de usuario
Datalogic
Datalogic PowerScan BC9600 Series Manual de usuario
Datalogic
Datalogic DS2 Ethernet Manual de usuario
Datalogic
Datalogic TL46-WLF Manual de usuario
Datalogic
Datalogic S51-MA Series Manual de usuario
Datalogic
Datalogic C-BOX 200 Manual de usuario
Datalogic
Datalogic IO-Link S8 Manual de usuario
Datalogic
Datalogic LD46 Manual de usuario
Datalogic
Datalogic TL50 Series Manual de usuario
Datalogic
Datalogic TL46-WLF Manual de usuario
Datalogic
Datalogic VS-CRX Manual de instalación y operación
Datalogic
Datalogic BC9180-STAR Manual de usuario
Datalogic
Datalogic DS2 Ethernet Manual de usuario
Datalogic
Datalogic S8-PR M53 Series Manual de usuario
Datalogic
Datalogic S5N-PA Manual de usuario
Datalogic
Datalogic S8-PR T53 Series Manual de usuario
Datalogic
Datalogic S8-MR M Series Manual de usuario
