PSV7000 Ionizer Kit
2 | Page
Safety Warnings
To avoid personal injury and equipment damage, it is required that you comply with all safety rules and
regulations. Although the PSV7000 Ionizer Kit involves no moving parts, the ionizer carries an electrical
charge when installed.
The system can be dangerous if safety precautions are ignored. Do not operate the system unless you
have been thoroughly trained. Do not disable or attempt to defeat any of the safety features of the
system. Failure to adhere to safety warnings, operate the equipment properly under normal use, and
apply safety practices constitutes a violation of your warranty agreement.
WARNING: Electric Shock Hazard!
Injury or death may result from contact to parts inside the equipment. Do not remove covers.
There are no user-serviceable parts. Tampering with the ionizer and/or any of its components
may result in damage, personal injury, electrical shock, or fire.
Never connect Power to any component that appears compromised, damaged, or tampered
with (ex. covers removed, wires hanging loose, etc.). Prior to connecting Power of any kind,
confirm the voltage requirements of your unit.
Keep hands and fingers away from ionizer emitter points to avoid electrical shock.
Ozone condensation can increase in enclosed spaces. Use ionizers in a well-ventilated facility to reduce
ozone exposure. For information about ozone condensation, refer to the documentation from the
ionizer manufacturer: http://content2.smcetech.com/pdf/IZN10.pdf.
Data I/O is not responsible for any defects or failures in the equipment caused by user negligence,
including but not limited to abuse, accident, improper maintenance, inattention, or unauthorized repair,
alteration, or installation.
