D&H PD05A Manual de usuario

Doehler & Haass

Locomotive decoder

Locomotive function decoder

Locomotive decoder Locomotive function decoder

DH05C PD05A FH05B

DH10C PD06A FH18A

DH14B PD12A FH22A

DH16A PD18A

DH18A PD21A

DH21A

DH22A

BA DH engl FW3_12 Druck.indd 1BA DH engl FW3_12 Druck.indd 1 10.05.21 14:2610.05.21 14:26

Fahrzeug-/Funktionsdecoder ab Firmware-Version 1.11

2Contents

1 Introduction ............................................................................................................................................ 4

2 Safety instructions ................................................................................................................................. 5

3 Warranty ................................................................................................................................................. 5

4 Support and help.................................................................................................................................... 5

5 Locomotive decoder DH05C / DH10C / DH14B / DH16A / DH18A / DH21A / DH22A /

PD05A / PD06A / PD12A / PD18A / PD21A .......................................................................................... 6

5.1 Functions................................................................................................................................................ 20

5.1.1 Limitations of the PD series compared to our DH decoder series......................................................... 21

5.2 Installation of the decoder...................................................................................................................... 22

5.3 Connection of the decoder..................................................................................................................... 23

5.4 Check after installation ........................................................................................................................... 26

6Locomotive function decoder FH05B / FH18A / FH22A.................................................................... 27

6.1 Functions................................................................................................................................................ 31

6.2 Installation of the Locomotive function decoders .................................................................................. 32

6.3 Connection of the Locomotive function decoders ................................................................................. 32

6.4 Check after installation ........................................................................................................................... 35

7System format SelecTRIX 1 (SX1) ....................................................................................see internet*

7.1 Functions....................................................................................................................................................

7.2 Setting options ...........................................................................................................................................

7.3 Operation....................................................................................................................................................

7.4 Explication of the brake sections................................................................................................................

* You can ﬁnd the detailed version at www.doehler-haass.de →DOWNLOADS →Fahrzeugdecoder →Fahrzeugdecoder

BA DH engl FW3_12 Druck.indd 2BA DH engl FW3_12 Druck.indd 2 10.05.21 14:2610.05.21 14:26

Fahrzeug-/Funktionsdecoder ab Firmware-Version 1.11

Locomotive/Locomotive function decoder from ﬁrmware version 3.12

Contents

8 System format DCC ........................................................................................................................... 35

8.1 Functions ............................................................................................................................................. 35

8.2 Setting options..................................................................................................................................... 36

8.2.1 List of supported CV ............................................................................................................................ 37

8.3 Operation ............................................................................................................................................. 51

9 System format Märklin-Motorola (MM) ........................................................................see internet*

9.1 Functions .................................................................................................................................................

9.2 Programming with Märklin central unit 6020/6021..................................................................................

10 System format SelecTRIX 2 (SX2)..................................................................................see internet*

10.1 Functions .................................................................................................................................................

10.2 Setting options.........................................................................................................................................

10.2.1 List of supported parameters...................................................................................................................

10.3 Operation .................................................................................................................................................

Supplement 1: Notes to Function Mapping................................................................................................. 52

Supplement 2: Speed characteristics ........................................................................................................... 54

Supplement 3: Unampliﬁed function outputs ............................................................................................. 55

Supplement 4: Electric coupling / Freewheeling diode /

Automatic coupling procedure (“coupling waltz“).............................................................. 56

Supplement 5: Constant braking distance................................................................................................... 61

Supplement 6: Decoder recognition (type and ﬁrmware version) ................................................................ 62

* You can ﬁnd the detailed version at www.doehler-haass.de →DOWNLOADS →Fahrzeugdecoder →Fahrzeugdecoder

BA DH engl FW3_12 Druck.indd 3BA DH engl FW3_12 Druck.indd 3 10.05.21 14:2610.05.21 14:26

Fahrzeug-/Funktionsdecoder ab Firmware-Version 1.11

Locomotive/Locomotive function decoder from ﬁrmware version 3.12

1 Introduction

The locomotive decoders supports various data formats and operating modes:

Our decoders can be used for normal direct current motors as well for coreless motors.

The operation on alternating current supplied layouts with switching impulse is not allowed! The switching

impulse destroys the decoder (exception: DH21A, DH22A and FH22A)!

The operation of inductive consumers (decouplers, relays, etc.) requires the connection of freewheeling diodes

(see supplement 4).

Decoder SX1, SX2 DCC MM1, MM2 DC-analog AC-analog

DH05C, DH10C, DH14B, DH16A, DH18A X X X X

DH21A, DH22A X X X X X

FH05B, FH18A X X X X

FH22A X X X X X

PD05A X X

PD06A X X X

PD12A, PD18A, PD21A X X

BA DH engl FW3_12 Druck.indd 4BA DH engl FW3_12 Druck.indd 4 10.05.21 14:2610.05.21 14:26

Fahrzeug-/Funktionsdecoder ab Firmware-Version 1.11

Locomotive/Locomotive function decoder from ﬁrmware version 3.12

2 Safety instructions

This product is not suitable for children under 14 years.

It might be swallowed by children under 3 years!

An improper use involves a risk of injury due to sharp edges and points.

3 Warranty

The functioning of every decoder is fully tested before delivery. Should nevertheless a failure occur, please contact the

dealer where you purchased the decoder or directly the producer (Doehler & Haass). The warranty period is two years from

the data of purchase.

4 Support and help

In case you have any problems or questions please contact us by email: technik@doehler-haass.de

Usually you will get an answer within a few days.

BA DH engl FW3_12 Druck.indd 5BA DH engl FW3_12 Druck.indd 5 10.05.21 14:2610.05.21 14:26

6Fahrzeug-/Funktionsdecoder ab Firmware-Version 1.11

6Locomotive/Locomotive function decoder from ﬁrmware version 3.12

DH05C (2nd generation)

M1, M2..............Motor connection 1, 2

G1, G2...............Track connection 1, 2

LV, LR ................Front light, rear light (each 150 mA)

AUX1, AUX2.....Additional function 1, 2 (each 300 mA)

AUX3, AUX4.....Unampliﬁed function 3, 4 *)

VS......................Supply voltage (also for SUSI)

ZCLK/AUX5......SUSI clock (or AUX5 unampliﬁed) *)

ZDAT/AUX6......SUSI data (or AUX6 unampliﬁed) *)

GND ..................Ground (0 V)

If necessary: Connect blue wire (common return conductor) to VS.

You can connect a buffer capacitor to VS (+) and GND (-).

Speciﬁcations DH05C

Dimensions [mm]

Total load

Maximum motor current

Maximum operating voltage

Function outputs for light: LV, LR (dimmable)

Function outputs: AUX1, AUX2 (dimmable)

Function outputs: AUX3, AUX4, AUX5, AUX6

With SUSI interface (if AUX5/AUX6 deactivated)

after publication

0,5 A

30 V

each 150 mA

each 300 mA

unampliﬁed *)

Connecting options

Without connection wires

With connection wires

DH05C-0

DH05C-3

*) Unampliﬁed function outputs: See supplement 3.

5 Locomotive decoder

BA DH engl FW3_12 Druck.indd 6BA DH engl FW3_12 Druck.indd 6 10.05.21 14:2610.05.21 14:26

Fahrzeug-/Funktionsdecoder ab Firmware-Version 1.11 7

Locomotive/Locomotive function decoder from ﬁrmware version 3.12

Speciﬁcations DH10C

Dimensions [mm]

Total load

Maximum motor current

Maximum operating voltage

Function outputs for light: LV, LR (dimmable)

Function outputs: AUX1, AUX2 (dimmable)

Function outputs: AUX3, AUX4

Function outputs: AUX5, AUX6

With SUSI interface (if AUX5/AUX6 deactivated)

12,7 x 8,9 x 1,4

1,5 A

30 V

each 150 mA

each 300 mA

each 1,0 A

unampliﬁed *)

Connecting options

Without connection wires

With ribbon cable for interface per NEM651

With connection cable for interface per NEM651

With connection wires

6 pin connector for direct plugging (NEM651)

DH10C-0

DH10C-1

DH10C-2

DH10C-3

DH10C-4

*) Unampliﬁed function outputs: See supplement 3.

DH10C (2nd generation)

M1, M2.............. Motor connection 1, 2

G1, G2............... Track connection 1, 2

LV, LR ................ Front light, rear light (each 150 mA)

AUX1, AUX2..... Additional function 1, 2 (each 300 mA)

AUX3, AUX4..... Unampliﬁed function 3, 4 (each 1,0 A)

VS...................... Supply voltage (also for SUSI)

ZCLK/AUX5...... SUSI clock (or AUX5 unampliﬁed) *)

ZDAT/AUX6...... SUSI data (or AUX6 unampliﬁed) *)

GND .................. Ground (0 V)

If necessary: Connect blue wire (common return conductor) to VS.

You can connect a buffer capacitor to VS (+) and GND (-).

BA DH engl FW3_12 Druck.indd 7BA DH engl FW3_12 Druck.indd 7 10.05.21 14:2610.05.21 14:26

8Fahrzeug-/Funktionsdecoder ab Firmware-Version 1.11

8Locomotive/Locomotive function decoder from ﬁrmware version 3.12

DH14B Speciﬁcations DH14B

Dimensions [mm]

Total load

Maximum motor current

Maximum operating voltage

Function outputs for light: LV, LR (dimmable)

Function outputs: AUX1, AUX2 (dimmable)

Function outputs: AUX3, AUX4

With SUSI interface (if AUX3/AUX4 deactivated)

18,5 x 9,2 x 1,7

1,0 A

30 V

each 150 mA

each 300 mA

unampliﬁed *)

Connecting options

14 pole foil plug for direct plugging (mTc14) DH14B

*) Unampliﬁed function outputs: See supplement 3.

mTc14 interface

AUX2

ZDAT

GND

ZCLK

AUX1

M1, M2..............Motor connection 1, 2

G1, G2...............Track connection 1, 2

LV, LR ................Front light, rear light (each 150 mA)

AUX1, AUX2.....Additional function 1, 2 (each 300 mA)

ZCLK..................SUSI clock (or AUX3 unampliﬁed) *)

ZDAT .................SUSI data (or AUX4 unampliﬁed) *)

GND ..................Ground (0 V)

There is no connection possibility (VS) for the common return conductor (blue wire) or a buffer capacitor.

BA DH engl FW3_12 Druck.indd 8BA DH engl FW3_12 Druck.indd 8 10.05.21 14:2610.05.21 14:26

Fahrzeug-/Funktionsdecoder ab Firmware-Version 1.11 9

Locomotive/Locomotive function decoder from ﬁrmware version 3.12

DH16A (2nd generation)

PluX16 interface

1 2

3 4

5 6

7 8

9 10

11 12

13 14

15 16

17 18

19 20

21 22

ZCLK

GND

Index

ZDAT

ZVS

AUX1

AUX2

M1, M2..............Motor connection 1, 2

G1, G2...............Track connection 1, 2

LV, LR ................Front light, rear light (each 150 mA)

AUX1, AUX2.....Additional function 1, 2 (each 300 mA)

AUX3, AUX4.....Additional function 3, 4 (each 1,0 A)

VS......................Supply voltage

ZVS ...................SUSI supply voltage

ZCLK..................SUSI clock (or AUX5 unampliﬁed) *)

ZDAT .................SUSI data (or AUX6 unampliﬁed) *)

GND ..................Ground (0 V)

If necessary: Connect blue wire (common return conductor) to VS.

You can connect a buffer capacitor to ZVS (+) and GND (-).

Speciﬁcations DH16A

Dimensions [mm]

Total load

Maximum motor current

Maximum operating voltage

Function outputs for light: LV, LR (dimmable)

Function outputs: AUX1, AUX2 (dimmable)

Function outputs: AUX3, AUX4

Function outputs: AUX5, AUX6

With SUSI interface (if AUX5/AUX6 deactivated

after publication

1,5 A

30 V

each 150 mA

each 300 mA

each 1,0 A

unampliﬁed *)

Connecting options

Without connection wires

With connection cable for interface per NEM652

With connection wires

16 pin connector for direct plugging (PluX16)

DH16A-0

DH16A-2

DH16A-3

DH16A-4

*) Unampliﬁed function outputs: See supplement 3.

BA DH engl FW3_12 Druck.indd 9BA DH engl FW3_12 Druck.indd 9 10.05.21 14:2610.05.21 14:26

10 Fahrzeug-/Funktionsdecoder ab Firmware-Version 1.11

10 Locomotive/Locomotive function decoder from ﬁrmware version 3.12

DH18A (2nd generation)

Next18 interface

1 18

2 17

3 16

4 15

5 14

6 13

7 12

8 11

9 10

AUX1

ZCLK

GND

*) AUX6

AUX5 *)

GND

ZDAT

AUX2

Speciﬁcations DH18A

Dimensions [mm]

Total load

Maximum motor current

Maximum operating voltage

Function outputs for light: LV, LR (dimmable)

Function outputs: AUX1, AUX2 (dimmable)

Function outputs: AUX3, AUX4, AUX5, AUX6

With SUSI interface (if AUX3/AUX4 deactivated)

9,7 x 8,9 x 2,8

1,5 A

30 V

each 150 mA

each 300 mA

unampliﬁed *)

Connecting options

18 pin connector for direct plugging (Next18) DH18A

*) Unampliﬁed function outputs: See supplement 3.

M1, M2...............Motor connection 1, 2

G1, G2................Track connection 1, 2

LV, LR .................Front light, rear light (each 150 mA)

AUX1, AUX2......Additional function 1, 2 (each 300 mA)

AUX5, AUX6......Unampliﬁed function 5, 6 *)

VS.......................Supply voltage (also for SUSI)

ZCLK...................SUSI clock (or AUX3 unampliﬁed) *)

ZDAT ..................SUSI data (or AUX4 unampliﬁed) *)

GND ...................Ground (0 V)

If necessary: Connect blue wire (common return conductor) to VS.

You can connect a buffer capacitor to VS (+) and GND (-).

910

BA DH engl FW3_12 Druck.indd 10BA DH engl FW3_12 Druck.indd 10 10.05.21 14:2610.05.21 14:26

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Convertidor de medios de D&H

D&H

D&H DH05A Manual de usuario

D&H

D&H DH05C Manual de usuario

D&H

D&H FH16A Manual de usuario

D&H

D&H PD10MU Manual de usuario

D&H

D&H DH05C Manual de usuario

D&H

D&H SD05A Manual de usuario

D&H

D&H DH05A/B Manual de usuario

D&H

D&H DH05C Manual de usuario

D&H

D&H DHP160 Manual de usuario

D&H

D&H DH05C Manual de usuario

D&H

D&H PD18MU Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario