D&D Technologies Codelocks CL4500 Manual de usuario

https://codelocks.zohodesk.eu/portal/en/kb/articles/cl4500-getting-started-guide-16-1-2023

Codelocks Support

CL4500 - Getting Started Guide

About Codelocks Smart Locks

The CL4500 and CL5500 locks can be operated and managed directly via the keypad or via a compatible

smartphone by downloading the C3 Smart App. This Getting Started Guide contains the common functions to

enable you to quickly program your lock.

For detailed instructions, refer to the Programming + Operating Instructions online

at:codelockssupport.com/smartlocks

The Basics

Master Code

The factory set Master Code is #12345678. This should be changed immediately after installation (Program 01).

The Master Code (and Sub-Master Code if set) always start with the # button. This puts the lock into

Programming Mode.

Programming

Each programming sequence starts with the #Master Code or #Sub-Master Code. The singular • blue dots

throughout the sequence represent an acceptance flash; the keypad will illuminate blue to confirm a correct input.

At the end of a sequence, the keypad will flash twice • • confirming it’s complete and programming has been

successful.

Access Methods

The lock supports a maximum of 350 Clients (users): User Codes (100), User Cards (150) and User Compatible

Phones (100).

Notice: The C3 Smart App replaced the K3 Connect App on February 14, 2023. For more information on

how to download, set up and use C3 Smart with your Codelocks Smart Locks,

visit:c3smart.netorcontact Codelocks Support.

https://codelocks.zohodesk.eu/portal/en/kb/articles/cl4500-getting-started-guide-16-1-2023

Keypad

The lock has a 12 button, backlit keypad which includes * and # buttons. The # button is only used for

programming. The * button is used in some programming sequences and with NetCodes.

Code Free

Code Free can be configured via Program 04 (refer to the Programming + Operating Instructions) or via Key-in-

Lever by changing the cylinder tailpiece (refer toInstallation Instructions).

NetCode ®

This function allows temporary access. Create time-sensitive codes via the Codelocks Connect Portal or your own

application with our simple API (application programming interface). For more information about Codelocks

NetCode® Technology, visit:codelocks.com/netcode

Remote Release

The lock has two sets of terminals within the front housing for remote release, labelled REM1 and REM2. REM1

is intended for push-button release where the lock will open for the normal set time. For detailed information,

refer to the Programming + Operating Instructions online at: codelockssupport.com/smartlocks

The App

Manage with the C3 Smart App

The lock can be managed with the C3 Smart App by any Bluetooth compatible smartphone. The App is available

on the Apple App Store for Apple devices or Google Play™ for Android™ devices by searching for C3 Smart.

Device Compatibility

The C3 Smart App is compatible with iOS 12+ and Android OS 12+.

Install + Sign Up

1 Install the C3 Smart App on your device.

2 Once installed, open C3 Smart and select Sign Up.

3 The account creation process includes email confirmation. Once the account has been created and email

dd ifi d i i h A

https://codelocks.zohodesk.eu/portal/en/kb/articles/cl4500-getting-started-guide-16-1-2023

address verified, sign in to the App.

4 To add a new lock, select the + icon on the Locks screen.

5 Enter the lock DIN and a name for your lock. We recommend choosing a meaningful name.

Note: The lock DIN is case sensitive.

 Lock Model  DIN

CL4500 GD, CL4510, CL4520 CL4510

CL5510 PK, CL5510, CL5520 CL5510

6 In the App, touch the ‘tick’ icon and then immediately, on the lock, enter the following program:

#Master Code • 00 • 1 • •

Example: #12345678 • 00 • 1 • •

Note: If you have changed your Master Code, substitute the code used in the example with your own code.

7 The lock will now pair with your phone.

For detailed instructions, refer to the Programming + Operating Instructions

td l k t / tl k

https://codelocks.zohodesk.eu/portal/en/kb/articles/cl4500-getting-started-guide-16-1-2023

atcodelockssupport.com/smartlocks

Factory Reset

The lock can be reset to its original factory settings. You may need to do this if the Master Code is no longer

known or you no longer have management access via a smartphone. To reset the lock, you must have access to the

battery compartment in the rear of the lock.

1 Remove a battery.

2 Press and hold the 0 button.

3 Replace the battery whilst continuing to hold the 0 button.

4 After the double beep, release the 0 button.

5 Press the 0 button three times within 5 seconds.

6 If successful, the keypad will illuminate blue for 7 seconds.



Basic Programs

01 Change the Master Code

Note: The Master Code is 8 digits in length.

#Master Code • 01 • New Master Code • New Master Code • •

Example: #12345678 • 01 • 87654321 • 87654321 • •

Result: The Master Code has been changed to 87654321.

02 Set or Change the Sub-Master Code

Note: The Sub-Master Code is 8 digits in length.

#Master Code • 02 • New Sub-Master Code • New Sub-Master Code • •

Example: #12345678 • 02 • 44556677 • 445566677 • •

Result: The Sub-Master Code has been changed to 44556677.

03 Delete the Sub-Master Code

#Master Code • 03 • •

Example: #12345678 • 03 • •

Result: The Sub-Master Code has been deleted.

15.1 Enable Lockdown

Prevents the lock from being unlocked by any method except via Master Code or Sub-Master Code:

https://codelocks.zohodesk.eu/portal/en/kb/articles/cl4500-getting-started-guide-16-1-2023

#Master Code • 15 • 1 • •

Example: #12345678 • 15 • 1 • •

Result: Lockdown is enabled - only the Master Code and Sub-Master Code can be used to open the lock.

15.2 Disable Lockdown

#Master Code • 15 • 2 • •

Example: #12345678 • 15 • 2 • •

Result: Lockdown is disabled.

Clients (Users)

20.1 Add a Code Client

#Master Code • 20 • 1 • Code • •

Example: #12345678 • 20 • 1 • 3366 • •

Result: The code 3366 can now be used to unlock the lock.

20.2 Add a One-Time Code Client

#Master Code • 20 • 2 • Code • •

Example: #12345678 • 20 • 2 • 7788 • •

Result: The code 7788 can be used to unlock the lock once only.

20.3 Add a Smart Card Client

Note: After entering the program below, the lock will wait for a MIFARE ® based smart card to be presented

over the keypad.

#Master Code • 20 • 3 • • present MIFARE ® card

Example: #12345678 • 20 • 3 • • present MIFARE ® card

Result: The smart card will be able to unlock the lock.

Note: Up to 150 cards can be registered.

21 Suspend a Code Client

#Master Code • 21 • Code • •

Example: #12345678 • 21 • 1199 • •

Result: The code 1199 has been suspended.

22 Restore a Code Client

#Master Code • 22 • Code ••

Example: #12345678 • 22 • 1199 • •

Result: The code 1199 has been restored.

T bl h ti g

https://codelocks.zohodesk.eu/portal/en/kb/articles/cl4500-getting-started-guide-16-1-2023

Troubleshooting

Incorrect Code/Card

If 3 incorrect access attempts are made, the lock will suspend activity for 30 seconds.

Programming Error

If a programming mistake is made, the keypad will flash red and the lock will revert to normal operation.

Battery Failure

If the battery fails, the key override should be used to open the lock. Batteries can be replaced by opening the

battery cover on the rear of the lock. Always use high quality AA batteries and ensure that the batteries are

inserted correctly. Please refer to local authority recommendations for the disposal of old batteries.

Regulatory Compliance

The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

The Codelocks Control + Convenience logo and NetCode® are registered trademarks of Codelocks Ltd., registered in the United Kingdom, United States and other countries and

regions.

The App is available on the Apple App Store for Apple devices or Google Play™ for Android™ devices. Apple, the Apple logo and iPhone are trademarks of Apple Inc., registered

in the U.S. and other countries. App store is a service mark of Apple Inc. Android, Google Play and the Google Play logo are trademarks of Google Inc.

GS_CLSL_v1:0123

https://codelocks.zohodesk.eu/portal/en/kb/articles/cl4500-getting-started-guide-16-1-2023

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cerrar de D&D Technologies

D&D Technologies

D&D Technologies Z-LOKK ZL1 Manual de usuario

D&D Technologies

D&D Technologies Lokk-Latch PRO SL Manual de usuario

D&D Technologies

D&D Technologies Tru-Close Mini-Multi Adjust Hinge Manual de usuario

D&D Technologies

D&D Technologies Lokk-Bolt Manual de usuario

D&D Technologies

D&D Technologies MAGNALatch 2 Series Manual de usuario

D&D Technologies

D&D Technologies Lokk-Latch Manual de usuario

D&D Technologies

D&D Technologies Lokk-Latch LLP SL Manual de usuario

D&D Technologies

D&D Technologies LokkLatch Magnetic Manual de usuario

D&D Technologies

D&D Technologies Lokk-Bolt Manual de usuario

D&D Technologies

D&D Technologies LokkLatch DELUXE Manual de usuario

D&D Technologies

D&D Technologies LOKKLatch PLUS Manual de usuario

D&D Technologies

D&D Technologies MAGNALATCH RE-KEYING SOP Manual de usuario

D&D Technologies

D&D Technologies Lokk-Latch PRO-SL Manual de usuario

D&D Technologies

D&D Technologies LokkLatch Plus Manual de usuario

D&D Technologies

D&D Technologies LOKKLATCH PRO.SL Manual de usuario

D&D Technologies

D&D Technologies MagnaLatch MLSPS2 Manual de usuario

D&D Technologies

D&D Technologies LokkLatch Deluxe Manual de usuario

D&D Technologies

D&D Technologies Lokk-Latch Deluxe Manual de usuario

D&D Technologies

D&D Technologies Magna-Latch Manual de usuario

D&D Technologies

D&D Technologies LokkLatch Round Manual de usuario

Manuales populares de Cerrar de otras marcas

Magic

Magic 105 Manual de usuario

Gantner

Gantner GAT NET.Lock 7020 System Guía rápida

Wittkopp

Wittkopp Insys 7202 Manual de usuario

Dorma

Dorma Studio Classic Manual de usuario

Securam

Securam ECSL-601 Manual de usuario

Sudhaus

Sudhaus 3003 Manual de usuario

Safety 1st

Safety 1st 48517 Manual de usuario

Pado

Pado FDS-10 Manual de usuario

Esco

Esco systeQ Series Manual de usuario

COMPX

COMPX National D8951 Manual de usuario

secureo

secureo Key Box Manual de usuario

Stock Loks

Stock Loks C8713 Manual de usuario

COMPX

COMPX 1T-058 Manual del propietario

Auslock

Auslock T11 Manual de usuario

ELCOM

ELCOM 7205 Manual de usuario

Stealth SAFES

Stealth SAFES ShadowVault Manual de usuario

Knox

Knox KeySecure 5 Manual de usuario

Kwikset

Kwikset 48334/01 Manual de usuario