Dancover TITAN Classic Manual de usuario

26-02-2019

for

Greenhouse

TITAN Classic

Manual

2 m

3,3 m

2,1 m

TECHNICAL CERTIFICATE/GREENHOUSE “TITAN Classic”

Follow the greenhouse assembly instructions and use it in strict accordance

with the manual and operating rules stated in the technical certificate. Please

keep the technical certificate for further reference.

DISCRIPTION

The greenhouse “TITAN Classic” is designed to create the climate, which is productive to

grow horticultural crops on the garden plots.

The length of the greenhouse is 3.3 m, the surface of the protected soil is 6.4 m2. The height

of the set up frame is 2.1 m.

The frame of the greenhouse is made of square galvanized pipe and it is assembled with the

studs, screws, nuts. The kit includes everything you need to fasten the covering.

The base of the greenhouse is not obligatory to install but recommended. The greenhouse is

fixed on the ground by digging special frame endings. The kit includes everything you need to

fasten the covering.

The greenhouse covering is completed on buyer’s request. To cover the greenhouse you need

2.5 polycarbonate sheets 4*2100*6000 mm.

The greenhouse has two doors and two vents.

Assembly instructions and operating rules

The green house should be assembled and installed on the ground according the instruction.

The buyer should control the assembly quality if it is made by third person.

Self-tapping screws of mount structure should be tightened to contact the flat head of the

screw with the covering surface and hold it to the frame, but do not allow the extra rundown of

the screws.

Avoid installing the greenhouse closely to the buildings and trees. The melting snow or ice is

a potential hazard. The recommended distance is minimum 2.2 m.

The greenhouse is designed to endure the wind of less than 20 m/s.

There is no need to skin the greenhouse during the winter time for the greater parts of the

regions of Russia. If the greenhouse in not looked after during winter, the customer should

determine the possible snow load or to skin the covering.

The limit snow load for the frame takes place when the weight of the snow blanket is 240

kg/1m2 of horizontal ground surface. This limit snow load requires characteristic snow load

of the IV snow region (according the classification of construction rules and regulations (SNiP)

2.01.07-85 “Loads and actions”.

If the greenhouse is installed according the instruction, the manufacture guarantees the

durability of the frame when the snow covers it in Moscow, Sverdlovsk, Novosibirsk and other

regions which are not exceeding IV snow region number. Buying a greenhouse, ascertain data

of snow region number where the green house is planned to be installed.

TECHNICAL CERTIFICATE/GREENHOUSE “TITAN Classic”

The manufacturer reserves the right for greenhouse engineering design changes.

Warranty

1. The manufacturer shall be responsible for completeness of the package.

2. The manufacturer shall be responsible for assemblability of the greenhouse in accordance with

the Assembly Instruction.

3. The manufacturer shall be responsible for structural integrity within the frames of the Operating

Rules.

4. The term for a claim is 24 months from the date of purchase.

Warranty liability

Cleaning and washing of the polycarbonate sheets

Warranty liabilities do not apply to cases of:

1. The greenhouse installation with violation of requirements of the manual

2. The violation of the operating rules.

3. Inappropriate use of the greenhouse.

4. The evidence that indicates corrosion on the cut of the details which do not influence the

operational characteristics of the construction.

5. The deformation of the greenhouse due to soil movement.

6. Floods, hurricanes and other natural disasters.

7. The deformation of the greenhouse under the show due to operational characteristics

violation.

1. Swill the sheets with warm water.

2. Wash the sheet with a solution of mild soap or household detergent and warm

water, using a soft cloth or sponge to remove dirt.

3. Swill with cold water and dry with soft rag.

Never use abrasives or highly alkaline cleaning compositions for cleaning polycarbonate

sheets. Dry rubbing of the surface will damage the protective layer of the cladding and shorten

its application time. Never rub the surface of polycarbonate sheets with brushes, metallic cloth

or other abrasive materials.

When disinfecting the greenhouse from pathogens causing fungal and bacterial diseases,

do not use “sulfur blocks” to avoid frame corrosion (blackening).

М2

bearer

(20х20)

L=0,64m

х 30

М2-1

bearer

(20х20)

L=0,64m

х 5

1package header (20х20)

L=0,3m

х 16

М5 roof

(20х20)

L=1,16 m

х 4

М5-1 roof

(20х20)

L=1,17 m

х 4

М5К roof

(20х20)

L=1,16 m

х 2

М5К-1 roof

(20х20)

L=1,17 m

х 2

М4 side stud

(20х20)

L=1,55m

х 8

М4К

side stud end most

(20х20)

L=1,55m

х 4

М21 hard bar of the arc

(20х20)

х 12

М8

isohyps end face (20х20)

L=0,58 m

х 4

М8-1 isohyps end face

(20х20)

L=0,58 m

х 4

М9 door side stud

(20х20)

L=1,87 m

х 2

М9-1

door side

stud (20х20)

L=1,87m

х 2

М10

door side isohyps (20х20)

L=0,81m

х 2

D10-1y

х 2

1ST PACKAGE BASE

2ND PACKAGE BASE

3 RD PACKAGE BASE

4 TH PACKAGE BASE

plate

L=1,53m

х 12

plate

L=1,16m

х 12

end face plate

L=1,53m

х 4

end face plate

L=1,16m

х 4

roof apex

х 5

3Runner

х 16

Door hook

х 2

Door Butt

х 8

Door bolt handle

х 12

Plate of the

door bolt

х 6

Inside part of

the door bolt

х 12

Valve chamber

of the door bolt

х 6

Rod of the

door bolt

х 6

Scotch tape

х 1

А11у

vertical vent member

(20х20)

L=0,9 m

х 4

11-1у

х 2

11-2у

х 2

А12-1у

isohyps vent member

(20х20)

L=0,75 m

х 2

12-2у

х 2

12-3у

х 2

12-4у

х 2

5 TH PACKAGE BASE

6 TH PACKAGE BASE

35 Screw М4х30

х 40

36 Screw М5х30

х 12

37 Screw М6х30

х 16

38 Screw М6х30

х 36

39 Screw М6х45

х 18

40 Stud

М4х45

х 6

41 Stud

М6х55

х 32

42 Self-tapping screw М4,2х19

х 280

43 Door weather strip

1,9m х 2

44 Nut M4 х 40

45 Nut M5

х 12

Nut M6 х 36

6 TH PACKAGE BASE4 TH PACKAGE BASE

М4К

М5К

М9

М5К

М4К

М8

М8-1

М4К

М8-1

М4К

М8

М4К

М8

х1

M6x30

х1

М6

х1

M6x45

х1

M6x45

х1

M6x45

х2

М9-1

М5К-1

М10

D10-1У

М4К

М8-1

М8

М9-1

D10-1У

М8

М5К-1

М9-1

М10

М5К-1

М5К

х1

M6x45

х2

M6x30

х2

М6

х1

М6х55

х2

M4,2x19

х1

М6х55

х1

М6х55

х1

М6х55

х1

M6x30

х1

M6x30

х1

M6x30

М4-1

М5

М5-1

М21

М4

х1

М6х55

М5-1

М21

М4 1

М4

М21

М5

М5-1

М6

х1

M6x45

M2 M2 M2

х1

М6х55

M2-1

660

L1=L2

D11-2У

х2

D12-1У

D12-4У

D11-2У

D11У

D11У D11У

D12-1У

M6x30

х2 х4

M4x30

х4

х2

М4

D12-4У

х4

М5

х4

M5x30

D12-4У

The measurements for base installation.

1980

582

816

3300

The UV-resistant side of polycarbonate sheets must

face outside (sunward). The UV-resistant side is usually

indicated with notations on the shipping plastic film. The

film is transparent on the back side of the polycarbonate

sheet. After marking the polycarbonate sheets, but prior

to cutting it, mark the UV-resistant side on every piece of

polycarbonate sheet: when the shipping film is removed

both sides look similar. The shipping film is removed

from both sides shortly before fastening the covering in

the frame.

Tape scotch on the cut sides of the polycarbonate

sheets.

D11У

D12-2У

D11-1У

х4

M4x30

х4

х2

М4

х2

М5

х2

M5x30

х2

D12-2У

D12-3У

D11-1У

D11У

D12-3У

х2

M6x30

670

2100

660

600

796

255

1200

793

1185

15331881

930

6000

910

H H H

G G

KK K

K K K

2100

6000

2100

660

670

660

6000

1535

1535 1185

Tabla de contenidos

Otros manuales de Kit de invernadero de Dancover

Dancover

Dancover Louver Wall Manual de usuario

Dancover

Dancover GH158040 Manual de usuario

Dancover

Dancover GH21100 Manual de usuario

Dancover

Dancover Polytunnel Greenhouse 3x6m Manual de usuario

Dancover

Dancover ASTRA GH120150 Manual de usuario

Dancover

Dancover TITAN Peak 240 4,2 Manual de usuario

Dancover

Dancover Mini Greenhouse GH152170 Manual de usuario

Dancover

Dancover Orangery Manual de usuario

Dancover

Dancover GH16050 Manual de usuario

Dancover

Dancover Polytunnel Greenhouse 4m Series Manual de usuario

Dancover

Dancover GH152200 Manual de usuario

Dancover

Dancover GH158011 Manual de usuario

Dancover

Dancover GH152100 Manual de usuario

Dancover

Dancover GH117000 Manual de usuario

Dancover

Dancover LOTOS Manual de usuario

Dancover

Dancover DUO Manual de usuario

Dancover

Dancover TITAN Dome 320 Manual de usuario

Dancover

Dancover GH152200 Manual de usuario

Dancover

Dancover GH82020 Manual de usuario

Dancover

Dancover Raised Bed 1x2m Manual de usuario

Dancover

Dancover HGSA1010 Manual de usuario

Dancover

Dancover GH152190 Manual de usuario

Dancover

Dancover GH140055 Manual de usuario

Dancover

Dancover GH152180 Manual de usuario

Manuales populares de Kit de invernadero de otras marcas

ACD PRESTIGE

ACD PRESTIGE MR3 H Manual de usuario

Vitavia

Vitavia VA0040-TRP Manual de usuario

VegTrug

VegTrug Nursery Manual de usuario

Riverstone Networks

Riverstone Networks Monticello 041315V Manual de usuario

STC

STC Easy Grow 6x12 Greenhouse Manual de usuario

CLIMA POD

CLIMA POD Spirit V7 Series Manual de usuario

Vitavia

Vitavia GAIA JUMBO Manual de usuario

Palram

Palram Harmony 6'x4' Manual de usuario

ClearSpan

ClearSpan Storage Master 104598 Manual de usuario

Sproutwell

Sproutwell GRANGE - 5 Manual de usuario

ACD

ACD Piccolo 03 Manual de usuario

Growhouse

Growhouse Lean To 6 x 8 Manual de usuario

Riverstone Networks

Riverstone Networks Grower's 181010V Manual de usuario

GrowSpan

GrowSpan 500 Series Manual de usuario

Robinsons

Robinsons 5ft Wide LEAN-TO Manual de usuario

Botanica

Botanica E Manual de usuario

PNI

PNI SP6000 Manual de usuario

Hortus

Hortus 211-203 Manual de programación