dallmeier Mountera Box with PSU Guía
007806 | REV. 1.0.1 | 2020-01-24
COMMISSIONING
Mountera® Box
Copyright © 2020 Dallmeier electronic GmbH & Co.KG
The reproduction, distribution and utilization of this document as well as the communication
of its contents to others without express authorization is prohibited.
Oenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of a patent, utility model or design.
The manufacturer accepts no liability for damage to property or pecuniary damages arising due
to minor defects of the product or documentation, e.g. print or spelling errors, and for those
not caused by intention or gross negligence of the manufacturer.
Figures in this document may dier from the actual product.
Specications subject to change without notice. Errors and misprints excepted.
All trademarks identied by ® are registered trademarks of Dallmeier.
Third-party trademarks are named for information purposes only.
Dallmeier respects the intellectual property of third parties and always attempts to ensure the complete identication of
third-party trademarks and indication of the respective holder of rights.
In case that protected rights are not indicated separately, this circumstance is no reason to assume that the respective
trademark is unprotected.
This product may include software developed by the OpenSSL Project for use in the OpenSSL Toolkit (https://www.openssl.org)
3
COMMISSIONING – Mountera® Box | REV. 1.0.1 | © 2020 Dallmeier
Contents
1 Validity 4
2 Documents 4
This Document 5
Other Applicable Documents 5
3 Typographical Conventions 6
4 Approvals/Certications 8
5 Safety Instructions 9
6 General Notes 12
Scope of Delivery 12
Transportation and Packaging 12
Warranty 13
Appropriate Use 13
7 Requirements 14
Ambient Conditions 14
Earthing/Grounding 15
Power Supply 16
8 Maintenance, Inspection and Cleaning 17
9 Mounting, Connection and Commissioning 18
10 Parts Description 52
11 Technical Product Specication (Basic Data) 58
12 Dimensions 60
4COMMISSIONING – Mountera® Box | REV. 1.0.1 | © 2020 Dallmeier
1 Validity
This document applies to the following devices:
• Mountera® Box with PSU
• Mountera® Box with SRS Edge
For reasons of simplication, the term “device” or “Mountera® Box” is used
in the following.
However, if passages in the text require distinctions between the individual
devices, the complete product names will be mentioned instead.
Figures in this document may dier from the actual product.
2 Documents
The product documentation for the device consists of various documents
which are provided in printed and/or digital form, as for example via the
website www.dallmeier.com.
Read the complete product documentation for the device carefully and
thoroughly before using the device. Always observe and follow the con-
tained instructions, notes and warnings as well as the technical data in the
currently valid product specication.
Keep all documents in legible condition and in a suitable location for future
reference.
Regularly check the website www.dallmeier.com for the latest product
documentation updates.
5
COMMISSIONING – Mountera® Box | REV. 1.0.1 | © 2020 Dallmeier
This Document
Commissioning
The document entitled “Commissioning” (this document) contains detailed
information concerning the installation, connection and commissioning of
the device as well as safety instructions and general notes.
The target audience of this document is trained system integrators (installa-
tion contractors of video security/surveillance systems).
Other Applicable Documents
Product Specication
The product specication contains detailed technical data, features and
characteristics of the individual device.
The target audience of the document is trained system integrators (installa-
tion contractors of video security/surveillance systems).
Conguration – SMAVIA Recording Server
(only relevant for Mountera® Box with SRS Edge)
The document entitled “Conguration – SMAVIA Recording Server” contains
detailed information concerning the conguration of the preloaded VideoIP
server software SMAVIA Recording Server.
The target audience of the document is trained system integrators (installa-
tion contractors of video security/surveillance systems).
6COMMISSIONING – Mountera® Box | REV. 1.0.1 | © 2020 Dallmeier
3 Typographical Conventions
This document may contain various warning words and symbols that indi-
cate potential sources of danger:
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result
in death or serious injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE
NOTICE addresses practices not related to physical injury and indicates
measures to prevent device and/or property damage due to improper
installation, assembly, wiring, operation, conguration or maintenance of
the device.
7
COMMISSIONING – Mountera® Box | REV. 1.0.1 | © 2020 Dallmeier
For reasons of clarity and readability, various text formatting elements and
types of emphasis are used in this documentation:
Instructions are indicated by arrows (➡).
➡Always carry out instructions one after the other in the sequence de-
scribed.
“Expressions” in quotation marks usually refer to individual components of
the device (housing parts, mounting elements, connections/interfaces, etc.)
or to control elements of the device’s web-based graphical user interface
(menu items, buttons, etc.).
Paragraphs in italics provide information on basic principles, special
features and ecient procedure as well as general recommendations.
8COMMISSIONING – Mountera® Box | REV. 1.0.1 | © 2020 Dallmeier
4 Approvals/Certications
The following approvals/certications were valid for the device at the time
of this document’s compilation:
• CE
• DIN 50130-4 compliant
Visit www.dallmeier.com for possible updates.
Note (USA)
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energ
and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interfer-
ence at his own expense.
9
COMMISSIONING – Mountera® Box | REV. 1.0.1 | © 2020 Dallmeier
5 Safety Instructions
Only use the device if it is in technically perfect condition, according to its
intended purpose, in a safety and hazard conscious manner and in accor-
dance with the following safety instructions:
• Qualied Personnel
The mounting, connection, commissioning and conguration of the
device may only be carried out by qualied personnel.
This also applies to the maintenance, inspection and repair of the device
in compliance with the locally applicable regulations (regional and
country-specic legal requirements and standards), such as the DIN VDE
0701-0702 series of standards (VDE 0701-0702: “Inspection after repair,
modication of electrical appliances – Periodic inspection on electrical
appliances – General requirements for electrical safety”).
• Regulations
The use of video and audio security/surveillance systems is, in general,
strictly regulated.
Before using the device, inform yourself about the currently valid laws
and regulations regarding data, worker and environmental protection
and ensure compliance with them.
• System Components
Only use internal components that have been tested and approved by
Dallmeier. Inappropriate internal components may cause malfunctions,
damage and data loss and may result in the loss of warranty.
• Modications to the Device
Do not make any modications to the hardware or software of the device
that have not been tested and approved by Dallmeier. Inappropriate
modications (e.g. unapproved paintwork or housing add-ons) may
cause malfunctions, damage and data loss and may result in the loss of
warranty.
10 COMMISSIONING – Mountera® Box | REV. 1.0.1 | © 2020 Dallmeier
• Product Documentation
The product documentation for the device consists of various documents
which are provided in printed and/or digital form, as for example via the
website www.dallmeier.com.
Read the complete product documentation for the device carefully and
thoroughly before using the device. Always observe and follow the con-
tained instructions, notes and warnings as well as the technical data in
the currently valid product specication.
Keep all documents in legible condition and in a suitable location for
future reference.
Regularly check the website www.dallmeier.com for the latest product
documentation updates.
• Condensation
If the device is brought from a cold to a warm environment, resulting
condensation may cause malfunctions and damage. In this case, wait
until the device has reached room temperature (up to 8 hours) before
commissioning.
• Earthing/Grounding & Equipotential Bonding
For the safety of persons (protection against dangerous contact voltages)
and devices (protection against over-voltages) as well as for the immunity
of information and communication technolog equipment to electro-
magnetic interferences (EMI), all protective measures, which are specied
by the currently applicable DIN, VDE and ISO standards and which provide
for a standard-compliant earthing/grounding and a correct equipotential
bonding of electrical and electronic devices, are mandatory and must be
fullled by all means.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Soporte de TV de dallmeier
