dallmeier DMS 2400 Manual de usuario
REV 1.0.0 | 2022-02-23
Service EN
DMS 2400 (MK3)
Copyright © 2022 Dallmeier electronic GmbH & Co.KG
The reproduction, distribution and utilization of this document as well as the communication
of its contents to others without express authorization is prohibited.
Oenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of a patent, utility model or design.
The manufacturer accepts no liability for damage to property or pecuniary damages arising due
to minor defects of the product or documentation, e.g. print or spelling errors, and for those
not caused by intention or gross negligence of the manufacturer.
Figures in this document may dier from the actual product.
Specications subject to change without notice. Errors and misprints excepted.
All trademarks identied by ® are registered trademarks of Dallmeier.
Third-party trademarks are named for information purposes only.
Dallmeier respects the intellectual property of third parties and always attempts to ensure the complete identication of third-
party trademarks and indication of the respective holder of rights.
In case that protected rights are not indicated separately, this circumstance is no reason to assume that the respective
trademark is unprotected.
This product may include software developed by the OpenSSL Project for use in the OpenSSL Toolkit (https://www.openssl.org)
3
SERVICE – DMS 2400 (MK 3) | REV 1.0.0 | © 2022 Dallmeier
Table of Contents
1 Validity 4
2 Documents 4
This Document 5
Other Applicable Documents 5
3 Typographical Conventions 6
4 Safety Instructions 7
5 General Notes 10
Transportation and Packaging 10
Warranty 10
Appropriate Use 10
Approvals/Certications 11
Mainboard Battery 11
6 Commissioning and Local Login 12
Local Login 12
Remote Login 14
7 Licenses 16
8 Updates 18
9 System Parameters 21
10 HDDs 24
Identify 24
Replace 28
11 Cleaning 32
12 Filter Mat 33
4SERVICE – DMS 2400 (MK 3) | REV 1.0.0 | © 2022 Dallmeier
1 Validity
This document applies to the DMS 2400 (MK3) appliance.
Figures in this document may dier from the actual product.
2 Documents
The product documentation contains several documents, which are inclu-
ded in the scope of delivery in a printed form and/or on a digital medium.
Read all documents included in the scope of delivery carefully and tho-
roughly before using the device.
Always follow the contained instructions, notes and warnings and observe
the technical specications.
Keep all documents in legible condition and in a suitable location for future
reference.
Regularly check the website www.dallmeier.com for the latest updates to
the product documentation.
5
SERVICE – DMS 2400 (MK 3) | REV 1.0.0 | © 2022 Dallmeier
This Document
This “Service” document contains detailed information on how to maintain
the appliance.
The target audience of this document is trained video security system inte-
grators.
Other Applicable Documents
Specication
The document “Specication” contains detailed technical specications,
features and characteristics of the device.
The target audience of the document is trained system integrators.
Conguration
The document “Conguration” contains detailed descriptions on the
conguration of the device.
The target audience of the document is trained system integrators.
Operation
The document “Operation” contains instructions for using all software
functions.
The target audience of the document is operators without technical
knowledge.
Commissioning
The document “Commissioning” contains detailed descriptions on installa-
tion, connection and commissioning of the device as well as safety instruc-
tions and general notes.
The target audience of this document is trained system integrators.
6SERVICE – DMS 2400 (MK 3) | REV 1.0.0 | © 2022 Dallmeier
3 Typographical Conventions
The document highlights important content with special text elements:
DANGER
DANGER indicates a hazardous situation, which if not avoided, will result
in death or serious injury.
WARNING
WARNING indicates a hazardous situation, which if not avoided, could
result in death or serious injury.
CAUTION
CAUTION indicates a hazardous situation, which if not avoided, could
result in minor or moderate injury.
NOTICE
NOTICE is used to address practices not related to physical injury.
Instructions are indicated by arrows (➡).
Bold expressions generally indicate a control element on the device (swit-
ches or labels) or on its user interface (buttons, menu items).
Paragraphs in italics provide information on basic principles,
special features and ecient procedures as well as general
recommendations.
7
SERVICE – DMS 2400 (MK 3) | REV 1.0.0 | © 2022 Dallmeier
4 Safety Instructions
Only use the device if it is technically in proper working condition and for
the intended purpose while keeping safety and potential dangers in mind.
Qualied Personnel
The installation, mounting, connection, commissioning and conguration of
the device may only be carried out by qualied personnel.
This also applies to the maintenance, testing and repair, whereby the re-
gulations of the DIN VDE 0701 series of standards (repair, modication and
inspection of electrical appliances) must be followed.
Regulations
The use of video and audio surveillance systems is, in general, strictly regu-
lated. Inform yourself about the currently valid laws and regulations regar-
ding data, worker and environmental protection before using the device and
ensure compliance with them.
System Components
Only use internal components that have been tested and approved by Dall-
meier. Inappropriate internal components may cause malfunctions, dama-
ges and data loss and may result in the loss of warranty.
Modications
Do not make any modications to the hardware or software that have not
been tested and approved by Dallmeier.
Inappropriate modications may cause malfunctions, damages and data
loss and may result in the loss of warranty.
8SERVICE – DMS 2400 (MK 3) | REV 1.0.0 | © 2022 Dallmeier
Documentation
The product documentation contains several documents which are included
in the scope of delivery in a printed form and/or on a digital medium.
Read the documents included in the delivery carefully and thoroughly.
Always follow the contained instructions, notes and warnings and observe
the technical data in the “Specication” document.
Keep all documents in legible condition and in a suitable location for future
reference.
Regularly check the website www.dallmeier.com for the latest updates of
the product documentation.
Condensation Water
If the device is brought from a cold to a warm environment, resulting
condensation water may cause malfunctions and damages.
In this case, wait (up to 8 hours) until the device has reached room
temperature before commissioning.
Earthing & Equipotential Bonding
For the safety of persons (protection against dangerous contact voltages)
and devices (protection against over-voltages) as well as for the immunity of
information and communication technolog equipment to electromagnetic
interferences (EMI), all protective measures, which are specied by the cur-
rently valid DIN, VDE and ISO standards and which provide for a standard-
compliant earthing and a correct equipotential bonding of electrical and
electronic devices, are mandatory and must be fullled by all means.
Lightning Storms
To avoid damage to the device by electrical surge during lightning storms,
all protective measures, which are specied by the currently valid DIN, VDE
and ISO standards and which provide for a standard-compliant lightning
protection equipotential bonding, are mandatory and must be fullled by
all means.
9
SERVICE – DMS 2400 (MK 3) | REV 1.0.0 | © 2022 Dallmeier
Operating Conditions
Unfavorable operating conditions may shorten the life of the device and
may cause malfunctions, damages and data loss and may result in the loss
of warranty.
Observe the specications given in the technical data, the operating
condition requirements and the maintenance instructions.
Shocks
Shocks can cause malfunctions and damages. The unit must not be moved
during operation.
Foreign Bodies
If objects or liquids get into the device, immediately disconnect it
from the power supply (pull out the power plug).
Contact the sales partner responsible for your area.
Burnt Smell
If you notice burnt smell or a formation of smoke coming from the
device, immediately disconnect it from the power supply (pull out
the power plug).
Contact the sales partner responsible for your area.
Opening
The device may only be opened by qualied personnel for commissioning,
inspection, maintenance and repair.
Disposal
Do not dispose waste electrical and electronic equipment into the
household trash. Disconnect the device from the power supply. Remove all
connected devices. Return the device to your respective sales partner.
10 SERVICE – DMS 2400 (MK 3) | REV 1.0.0 | © 2022 Dallmeier
5 General Notes
The functional range of the device depends on the ordered equipment
or device variant and may dier from this document’s content. Cer-
tain functions and features may require the purchase of an additional
license.
Transportation and Packaging
Store the original packaging for later transportation.
Dallmeier is not responsible for any damage resulting from unprofessional/
improper transportation.
The device should only be shipped in the original packaging.
If the original packaging is no longer available, ensure that the used
packaging suciently protects the device against damage, moisture,
heat and cold.
Warranty
The terms and conditions valid at time the contract was signed shall apply.
Appropriate Use
The DMS 2400 (MK3) appliance combines the recording software
SeMSy® Recording Server with reliable and compact server hardware. Well-
matched components ensure high storage speed and allow recording of up
to 24 high-resolution video streams at a frame rate of 30 fps. This makes the
appliance ideally suited for video security systems in stores, gas stations or
private homes that require the highest recording quality in a small foot-
print.
Otros manuales para DMS 2400
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de DVR de dallmeier
dallmeier
dallmeier DIS-1/S Manual de usuario
dallmeier
dallmeier DMS 240 Manual de usuario
dallmeier
dallmeier DMS 80 Guía rápida
dallmeier
dallmeier SeMSy iPS 10000 Manual de usuario
dallmeier
dallmeier DIS-2/M StreamerPro HDD Large UTP Instrucciones de funcionamiento y mantenimiento
dallmeier
dallmeier IPS 10000 Guía
dallmeier
dallmeier DMS 180 III Enterprise Manual de usuario
