DAKtel DT-7X Manual de usuario
1
DT-7X MULTI-FUNCTIONAL
SMART HOME SYSTEM
USER MANUAL
OPTIONAL ACCESSORIES
DECT TERMINALS
OPTIONAL ACCESSORIES
LOW POWER
RF TRANSCEIVERS
DT-7X MULTI-FUNCTIONAL SMART HOME SYSTEM
USER MANUAL
PACKAGE CONTENTS: (depend on the order. Base, handset, communicator and low power
transceivers delivered in separate boxes)
•
1X 4G LTE / DECT / LOW POWER RF HUB (with 5000mAh battery)
•
1X power adapter 900mA
OPTIONAL PARTS
•
1x DECT handset (with 850mAh battery)
•
1x DECT communicator with 500mAh battery) + 1x communicator charger + power adapter
•
1x Low Power fall detection pendant
•
1x Low Power wrist pendant
•
1x Low Power emergency Pull Cord
WIRELESS HOME SYSTEM (TECH SPECS)
4G LTE module no. FLY480W for VOICE and DATA interface
Baseband chip: SC9820W
RF bands: GSM:700/850/900/1700/1800/1900/2100/2300/2400/2600, WCDMA:
LTE B1, B2, B3, B4, B5, B6, B7, B8, A28, B28, B38, B40, B41, B66
WCDMA 2100/900MHz TD-SCDMA B34/B39
Network: FDD-LTE, TDD-LTE, WCDMA/HSPA+, TD-SCDMA, GSM/GPRS/EDGE
Wi-Fi module: SC2331B (includes 2.4Ghz WLAN IEEE 802.11b/g/n MAC/baseband/radio,
Supports SDIO for WIFI host interface
Wi-Fi rate: FDD-LTE/TDD-LTE: upload 50M / download 150Mbps
HSPA+: upload 5.76M / download 21Mbps
TD-SCDMA: upload 2.2Mbps / download 2.8Mbps
DECT module: DSPG DE56200AA3CLC(BS), DE56200AA4CLC(HS),
DECT RF: DE19RF19ZCNC, EU 1800, US DECT 6.0 1900
RF 433 and 869: 315/433/480/510/868/915MHz FSK/GFSK Transceiver with 2K ~ 250Kbps
1
2
HIGHLIGHT FEATURES
•
SOS / Alarming (up to 6 numbers running in a loop)
•
ContactID alert messages (under PSTN and Cellular)
•
SMS alert messages (under cellular)
•
8 sec automatic line disconnecting (under PSTN)
•
Room monitoring (with MIC and SPK control)
•
Base with 2-Way Voice & alarming
•
Handset with 2-Way Voice, 2-inch OLCD black display & SOS button
•
150 entries phonebook (with direct access)
•
Loud ringing (up to 85dB)
•
Amplifier (up to 30dB)
•
Languages support (up to 8 languages)
•
Priority numbers (up to 5 numbers)
•
Speed dialing (up to 9 numbers)
•
Silent mode detection
•
Base battery with 5,000mAh
•
Smart alarm + Alarm memory
•
Handset 3.7V 850mAh lithium battery
•
DECT Range up to 300m (outdoor) 50m (indoor)
•
Low Power RF 433 and 869 range up to 1000m (outdoor) 500m (indoor)
OTHER OPTIONAL
•
DECT Communicator: with IP65 water protection.
•
Low Power RF Transceivers with IP68 water protection (wrist pendant, fall detection pendant &
emergency pull cord). Other accessories such as smoke detector, movement detector, gas leak
detector, water leak detector will be added later)
3
DECT HANDSET
4G LTE / DECT BASE
Receiver
Up/Down Keys
Amplifier
Talk Key
Key Lock
Display
Speaker
SOS
Speaker
Battery Door
Menu / Ok
Off Key
Main Keys
Ring Mute
Pause
Microphone
Intercom / Delete
Sim Card
Slot
PSTN
Line
Power
Adapter
On/Off
Speaker CoverSOS Handset
Charging Point
Page /
Registration
Front side Back side
Front side Back side
Leds indications
1. Accessory lost link
(blue color)
2. Wi-Fi connection
(green color)
3. Cellular connection
(white color)
4. Chaerging / low battery /
in use (red color)
4
BASE BUTTONS / OPERATIONAL
Base back side has 5 sockets for:
•
PSTN line: For landline connection
•
PAGE button: To call another terminal or terminals registration mode
•
UNIT ON/OFF switch: The switch must be ON at all time allowing the system fully operational
•
USB connection: For power adapter connection
•
SIM card slot: Normal size SIM card. Insert and remove by a push & click (“new” sim card area
covered by a protection cover)
BASE LED INDICATIONS
•
RED: steady when handset in charging mode + steady when in a call + flashes in registration mode
and low battery consumption
•
WHITE: Cellular network connection indication
•
GREEN: Wi-Fi connection indication
•
BLUE: flash when RF pendant/s lost link (“accessory lost link indication”). IMPORTANT: DUE TO
POWER CONSUPTION AND POWER SAVING, THE LOST LINK INDICATION (LOCALLY AND BY SMS
alert) will be after 24 hrs.)
BEFORE FIRST USE AND OPERATIONAL
•
Please insert the SIM card into the base unit (when inserting the SIM, make sure that the power
switch is OFF and power supply disconnected)
•
After inserting the SIM, replace the sim cover and screw it correctly
•
Connect the power supply and turn ON the switch. The carrier name will appear on the screen once
the connection is successful
•
Insert the battery to the handset and turn it ON. The handset will automatically be registered to the
base. If the handset does not register to the base (handset display flashes), follow the below
instructions:
•
Long press on the base PAGE button till the base red led flashes on the base.
•
Go to handset registration mode and press menu/ok
•
Select base 1-4 and press menu/ok
•
Insert the password: 0000 and press menu/ok
5
•
At this stage the handset should make registration sound and the DECT antenna indication should
appear on the screen left side. The cellular antenna indication on the screen right side
•
In cellular mode, once pressing the call button or SPK button, you will hear the dial tone.
WI-FI
Internet connection over the cellular platform
Please follow the below instruction to use the Wi-Fi:
•
On handset menu, go to BASE OPTION and press Menu/ok
•
Select WLAN setting and press Menu/ok
•
Select ON and press Menu/ok
•
The Wi-Fi (hot spot) name is DT_7X, you may now press Menu/ok (or change the internet
connection name and then press Menu/ok)
•
After the hot spot name, you reached the hot spot password (the current password is 12345678),
you may press Menu/ok to confirm or insert your own 8 digits password to your network security
and then press Menu/ok to confirm.
•
Once finished you will hear a short sound for the confirmation and now you can connect any device
that support Wi-Fi to your personal DT-7X hotspot.
GENERAL HANDSET MENU
Press the MENU/OK to enter the menu. Roll down or up using the arrow keys to move the crosser in
the menu. To select/enter the item, press MENU/OK again. The below items are included in the menu:
•
Call Log
•
Phonebook
•
Base Option
•
Handset opt. (option)
•
SOS Settings
•
Prior Number
•
Room Monitor
•
Registration
6
CALL LOG
Allows to check the dialed or received calls with date and time.
You can also delete a single item or all the items or add them to the Phone Book (add to PB).
To choose an action press the MENU/OK button.
PHONE BOOK
Phone book contains: list of stored names and numbers (you may also enter a direct character for a
quick search), NEW ENTERY (storing a new name and number to phonebook), EDIT RECORD (editing
an existing name or number in the phonebook), DEL RECORD (you can delete a single item), DELETE
ALL (you can delete all the items), MEM STATUS (by pressing the MEM STATUS: it will show you how
many numbers are stored in the phonebook and how many are still free)
BASE OPTION
DELETE HS
Use this function to unregister handset/s or Communicator/s (when going inside the deleted items,
the screen will display PP and a number. PP stands for Portable Part, meaning either handset/s or
Communicator/s. by pressing the code (0000) and MENU/OK the selected unit will be unregistered
to the base.
RING SET UP
You may select the melody and volume for the BASE
MODIFY PIN
This option allows you to modify the manufacturer pin code. The manufacturer pin code is preset to
0000 (four zero).
PABX NUMBER
If the unit connects under a private PABX, you may select a number (up to 8 digits) before the dialed
number. The unit will dial automatically this pre-number / code
7
LANGUAGE
The language in this section is for the voice announcements (total 3 voice prompt announcements),
for Communicator Low Battery, SOS call and ECI mode (access code).
WLAN SETTINGS (FOR THE WI-FI)
As explained above
PP SET UP
You may modify any of the DECT terminals (handsets or Communicators) which are registered to the
base with:
INT (internal) ring: the internal ringing melody and volume what does internal and external mean
EXT (external) ring: the external ringing melody and volume
Vibrating: turning the vibration ON or OFF (only for communicator)
Audio set up: calling party volume setup under speaker or earphone mode
NOTE
First you need to select which PP you wish to modify. Then press MENU/OK to select and confirm,
you may move with up and down and select with MENU/OK. For final confirmation use again the
MENU/OK button
TELECOM
This feature is meant for a special connection of the device to a telecom operator modem WHEN
using PSTN line only. It is recommended to select OTHERS. The device can support any telecom
operator and it is set during pre-production procedure
8
WIRELESS ACCESSORIES (OPTIONAL)
In the menu:
You can register a new accessory, modify or delete.
RF ACCESSORY REGISTRATION:
1. Press and hold the base PAGE button (5-6 sec) till the red LED flashes on base
2. Single press again on the same PAGE button
3. Then Press (single or long press) on the accessory SOS button
4. A successful registration will follow with a single sound from the base
5. After success registration, the device is ready to use. If the device will lose the link to the base, a
message will be sent to the designated number (as set in SMS or ContactID) and the base top blue
LED will turn ON (indication for RF accessory lost link). The alert will be after 24 hrs from the lost link
6. In the handset menu can locate the registered RF accessory by its number (from 1-10)
Fall Detection Pendant Wrist Rendant Emergency Rull Cord
IMPORTANT NOTICE:
The Low Power RF Transceivers are optional. However: the base already supports the low power RF
platform (RF433)
9
MAKING ALARM FROM RF ACCESSORY
•
Once alarm is triggered, the call will be connected from the base audio channel (will follow with 4
tones alarm sounds from base)
Fall detection sensitivity levels
1. The fall detection has 3 levels for sensitivity, for user/s. please follow as below to adjust the
sensitivities levels to meet the user/s requirements
1.1 Technician (MENU*1006) mode only: please contact us for more details!
•
In fall detection pendant you have up to 10 sec to cancel the alarm (either by long press on the SOS
button and or tilt the pendant to vertically position) after the BIP sound starts.
CANCEL ALARM FROM RF ACCESSORY
•
Press and hold for 3-4 sec the SOS button and or pull again the cord on the emergency pull cord
for 3 sec and or in the fall detection pendant: tilt it to vertically position
BASE DEFAULT:
by selecting BS default you will need to enter the pin code (0000). Once confirming all the default
settings, the base will return to the original manufacturer settings! It is not recommended to base
default unless it is instructed by your provider or agent.
Otros manuales para DT-7X
1
Tabla de contenidos
