DAHON Bike Manual de usuario
Instructions
Service
Contents
02
Dealer Pre-delivery Checklist .............................................................................03
VRO Stem ..................................................................................................................07
Flat Pak Stem ...........................................................................................................08
Handlepost Hinge ..................................................................................................10
Headset .......................................................................................................................12
Frame Latch ..............................................................................................................13
LockJaw Hinge Adjustment ...............................................................................17
Kore I-Beam ..............................................................................................................22
Dahon Neos Derailleur .........................................................................................23
WARNING:
All Dahon bikes use only original Dahon component specifications.
The company will not be liable for any damages caused by non-original
Dahon parts.
Customer Information
Name:
Email:
Address:
Dealer Information (stamp)
Name:
Email:
Address:
Bike Information
Model:
Year:
Serial #:
Mechanic Information
Signature:
Name:
Date of check:
Please fill out the pre-delivery checklist to activate the warranty.
This following pre-delivery checklist information should be filled out by
a qualified bicycle mechanic. If the mechanic is unclear of the requirements
and process needed to carry out any checklist item, he/she should seek the
appropriate assistance.
03
Dealer Pre-delivery Checklist
Frame
Item Description RemarksOK
The frame is not damaged or defective.
All frame joints do not have physical defect or damage.
Main hinge(s) opens and closes freely.
Main hinge(s) is not obstructed when locked.
Main hinge safety latch functions properly.
Magnetix holding latches are securely tightened in
front and rear of bicycle.
Drivetrain Pedal, cranks, chainrings, bottom bracket and derailleur(s)
are securely fastened and correctly aligned.
Chain
Chain and gear
selector assembly
Derailleur(s) /
hub actuator
Gear selection
Chain guard
Moves freely and accurately through all gear selections.
Correctly aligned with all gears.
Cable locking nut is secure.
Excess cable should be tied, cut (reasonable length) and
capped.
Mechanism(s) is securely fixed to the handlebars.
Free of physical defect or damage. Correctly positioned.
Retaining nuts are secure.
The chain is correctly wired between the front and rear
sprockets; chain is free from physical defects and rust.
Brake Levers
Brake Cables
Moves and returns without restraint with the brake cable
positioned correctly within the lever.
Excess cable should be tied or cut to a sensible
length and capped.
Calipers can move and are free from damage.
Cable locking nut is secure.
Dealer Pre-delivery Checklist
04
Handlebar and
handlepost
Handlepost,
stem,handlebar
Headset
Handlepost
hinge
Free of physical defect or damage.
All bolts are fastened and correctly tightened.
Correctly tightened and adjusted.
Opens and closes.
Free of all obstruction when locked.
Safety lock operates properly.
Saddle and
seatpost
Saddle
Seatpost
All seat bolts, saddle bolts, and seat quick releases are
correctly tightened and adjusted.
Saddle alignment is correct (forward and level).
Ability to fold your frame efficiently.
(For bikes fitted with suspension seatposts) Functioning
and operating properly.
Wheels
Wheel rims, bearings and spokes do not have any
physical damage or defect.
Wheel nuts and spoke nipples are tight.
Front and rear wheels are securely fastened; do not
foul the brake blocks, mudguards, or anything else.
Item Description RemarksOK
Brake Blocks
Brake Calipers
Blocks are correctly positioned to make contact with
the rim. Retaining nuts are secure.
Front and rear calipers are correctly centered; they
are smooth and effective in gripping the wheel rim.
05
Dealer Pre-delivery Checklist
Wheel quick
release
Wheel bearings Correctly installed and adjusted.
Correctly installed and adjusted.
Item Description RemarksOK
Tires
Free of physical damage or defect; properly positioned and
facing the correct direction.
Have the correct air pressure; dust cap can be located
on the valves.
Bell
Reflectors
Accessories
Lights
Owner Manual
Folding and
unfolding
Check that both reflectors are present and securely
fastened to your front and rear wheels.
Check that the bell is present and securely fastened to
the handlebar.
Mudguards, racks, kickstands, and supports are firmly attached
to your bicycle. All supports are in place and tightly fastened.
Support brackets function properly.
Magnetix correctly aligned.
Bike folds properly.
The bike stands firmly when folded.
Bike unfolds completely.
Correct owner manual is with the bicycle.
06
Lights and wiring are firmly attached and functioning properly.
if a dynamo hub is fitted, check that the rotation direction is correct.
WARNING:
Check to see if the clamps are
facing the outside; properly
aligned to the stem mount T-bar.
VRO Stem
With a VRO clamp, the handlebar can be easily
adjusted to fit the rider’s height or desired riding
position by simply moving it up and down, forward
and backward. The following instructions explain
how to adjust the VRO clamp.
Step 3 - Adjust the height and position of the
handlebar to attain your preferred riding position.
Move the VRO clamp within the window of
adjustment - front, backwards, up and down.
Step 4 - When you have established your desired
position, proceed to tighten the bolts of the VRO
clamps using a torque of 10 Nm.
Step 2 -Using a 5mm Allen key, loosen the bolts
of theVRO clamps.
NOTE:
Check to see that the angle of the handlebar
allows immediate access to the brake levers.
WARNING:
If you are unsure of how to make
proper adjustments to your bicycle,
seek a qualified bicycle technician
for professional adjustments.
07
Step 5 - Putting Allen key into tool box.
Step 1 - Taking 5mm Allen Key out of tool box.
08
Flat Pak Stem
Step 2 - To adjust the height and position of
the Flat Pak stem, close lock lever tightly by
pushing forward. Lock lever tension can be
adjusted with the screw below the stem. Rotate
within the window of adjustment for preferred
riding position
Step 1 - When facing the stem from riding
position, open the lock lever on top of the
Flat Pak stem by pulling it towards you.
Flat Pak Stem Adjustment
Overview
Front Lock Lever
Lock Lever
The newly developed Flat Pak stem allows easy adjustment of the handlebar in any direction
through two quick-release levers. By adjusting the handlebar's angle, riders can change their
riding position; whether upright for leisurely riding, or forward for more competitiveness. The
Flat Pak stem also rotates 90° to save room in tight spaces.
Flat Pak Stem Continued
High
City position
Level
Trekking position
Low
Road position
Step 3 - Lift front lock lever and rotate handlebars
to desired position. While establishing your
perferred riding position, check to see that the
handlebar is readjusted in the right position.
The correct angle of the handlebars should
allow the fingers to reach the brake levers.
Step 4 - After the handlebar has been
placed in the desired position, close front
lock lever tightly.
NOTE: Check that the angle of the
handlebar will allow immediate
access to the brake levers.
NOTE: To avoid rust, regularly apply
grease to the joints.
Flat For folding
To achieve your preferred riding position,
you can adjust the height and position of
the Flat Pak stem. Here are some
suggested riding positions:
WARNING:
Before you start riding your bicycle, check
to see that all screws and lock levers are
tightly secured.
09
CAUTION:
Do not attempt to ride your bicycle with a
loose handlepost hinge. If when you close
the handlepost hinge and then close the
hinge latch, it appears loose or requires too
much force to close, the latch may need to
be readjusted.
WARNING:
If you are unsure of how to make
proper adjustments to your bicycle,
seek a qualified bicycle technician for
professional advice on adjustments.
Handlepost Hinge
On Dahon folding bicycles, the handle-post
hinge latch should be checked before each
ride to ensure that it closes properly for the
handle-post to remain secure. A closed
handle-post hinge with a properly adjusted
and secured latch should not have side-to-side
movement. Periodically, inspect the handle-post
to ensure that it is properly adjusted.
Several versions of handlepost can be found on
different Dahon models. With a slight difference,
the adjustment of the hinge latch is virtually the
same. Check the handlepost hinge to find out
which version is used, then proceed to follow the
appropriate instructions for adjusting the latch.
NOTE:
For details about how to open the hinge,
refer to the “folding instructions”.
These instructions are specifically for the
adjustment of the hinge. Regarding the
adjustment of the headset, refer to the
“headset instructions”.
RADIUS V
RADIUS
VYBE
OPEN CLOSED
The Different
Handlepost Hinges
10
Otros manuales para Bike
1
Tabla de contenidos
Otros manuales de Bicicleta de DAHON
DAHON
DAHON FLO PACKING - 2009 Manual de usuario
DAHON
DAHON LOCKJAW - 2009 Manual de usuario
DAHON
DAHON - 2010 Instrucciones de funcionamiento
DAHON
DAHON 2007 Compact series Manual de usuario
DAHON
DAHON Bike Manual de usuario
DAHON
DAHON ESPRESSO - 2009 Manual de usuario
DAHON
DAHON UNIO E20 Manual de usuario
DAHON
DAHON FLO PACKING - 2008 Manual de usuario
DAHON
DAHON PAQ MINI PACKING - 2009 Manual de usuario
DAHON
DAHON BOOST Manual de usuario
DAHON
DAHON JETSTREAM P8 - 2009 Manual de usuario
DAHON
DAHON - 2010 Manual de usuario
DAHON
DAHON FLO - 2008 Manual de usuario
DAHON
DAHON COMPACT - 2008 Manual de usuario
DAHON
DAHON JACK - 2009 Manual de usuario
DAHON
DAHON Zero G XA Manual de usuario
DAHON
DAHON FLO - 2009 Manual de usuario
DAHON
DAHON FUEGO Manual de usuario
DAHON
DAHON Bicycle Manual de usuario
DAHON
DAHON PAQ MINI - 2008 Manual de usuario
