Daewoo DV-S103WN Manual de usuario

Video Cassette Recorder

DV-S103WN

PAL NTSC

OWNER’S MANUAL

DRAWING YOUR ATTENTION

Thank you purchasing this VCP, developed to provide advanced features and functions for high quality performance.

To obtain the best results and to avoid malfunction, PLEASE CAREFULLY READ THE DESCRIPTIONS AND OPERATING PROCEDURE

CONTAINED IN THIS OWNER’S MANUAL PRIOR TO OPERATING THIS VCP.

Caution: To prevent electric shock do not use this polarized plug with an extension cord receptacle or other outlet unless the

blades can be fully inserted to prevent blade exposure.

Warning: This video cassette player should be used with AC 90 -250V~, 50/60Hz.

To prevent electric shocks and fire hazards, do NOT use any other power source.

Caution: Any changes or modification in construction of device which are not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

When you are not using the VCP for along period, it is recommended that you disconnect the power cord

from the AC outlet.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE OF THE ENCLOSURE. DO NOT

OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

The lightning flash with arrowhead symbol an equilateral

triangle is intended to alert the user to the presence of

uninsulated “dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an equilateral triangle is intend

to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature

accompanying the appliance.

RISK OF ELECTRIC SHOCKS

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

IMPORTANT SAFEGUARDS

For your protection, please read these safety instructions completely before operating the appliance, and keep this manual for future

reference.

Carefully observe all warnings, precautions, and instructions on the appliance, or the ones described in the operating instructions and

adhere to them.

USE

Power Sources–This set should be operated

only from the type of power source indicated on

the marking label. If you are not sure of the type of

electrical power supply at your home, consult your

dealer or local power company. For those sets

designed to operate from AC 90-250V~, 50/60Hz.

Grounding or Polarization–This set is equipped

with a polarized AC power cord plug (a plug having

one blade wider than the other), or with a

threewire grounding type plug (a plug having a

third pin for grounding).

Follow the instructions below.

Overloading–Do not overload wall outlets,

extension cords or convenience receptacle beyond

their capacity, since this can result in fire or

electric shock.

Object and Liquid Entry–Never push objects of

any kind into the set through openings as they may

touch dangerous voltage points or shart out parts

that could result in a fire or electric shock.

Never spill liquid of any kind on the set.

Attachments–Do not use attachments not

recommended by the manufacturer, as they may

cause hazards.

Cleaning–Unplug the set from the wall outlet

before cleaning or polishing it. Do not use liquid

cleaners or aerosol cleaners. Use a cloth lightly

dampended with water for cleaning the exterior of

the set.

AC 90-250V~?

UNPLUG

Water and Moisture–Do not use powerline

operated sets near water-for example, near a

bathtub, washbowl, kitchen sink, laundry tub, in

a wet basement, or near a swimming pool, etc.

Accessories–Do not place the set on an

unstable cart, stand, tripod, bracket, or table.

The set may fall, causing serious injury to a child

or an adult, and serious damage to the set. Use

only a cart stand, tripod, bracket, or table

recommended by the manufacturer.

Ventilation–The slots and openings in the

cabinet are provided for necessary ventilation.

To ensure reliable operation of the set, and to

protect it from overheating, these slots and

openings must never be blocked or covered.

– Never cover the slots and openings with a

cloth or other materials.

– Never block the slots and openings by placing

the set on a bed, sofa, rug or other similar

surface.

Portable Cart Warning–An appliance and cart

combination should be moved with care. Quick

stops, excessive force, and uneven surfaces may

cause the appliance and cart combination to

overturn.

–Never place the set in a confined space such as

a bookcase, or built-in cabinet unless proper

ventilation is provided.

Power-Cord Protection–Route the power cord

in order not to be walked on or pinched by items

placed upon or against them, paying particular

attention to the plugs, receptacles, and the point

where the cord exits from the appliance.

–Do not place the set over a radiator or heat

sunlight.

In the normal temperature, if you pour a cold

liquid into a glass, water vapour in the air will

condense on the surface of the glass. This is

moisture condensation. The moisture

condensation may occur inside of VCPs, if used

in this condition, it will cause damage to the

head and the tape.

In case of moving the VCP from a cold place to

heated place,

Or the temperature of surroundings goes up due

to room heating switched on.

Or moving the VCP suddenly from air conditioned

room to a place of high temperature of humidity

in summer.

When the moisture condensation occurs inside

of the VCP, NEVER insert the cassette into the

cassette compartment. Remove the cassette, if

loaded, by pressing the STOP/EJECT key. Only

operate the VCP after the moisture condensation

has completely dried out. Normally, it takes

about 2 hours.

MOISTURE CONDENSATION

When does the

moisture

condensation occur

inside of the VCP?

SERVICE

Damage Requiring Service–Unplug the set

from the wall outlet and refer servicing to

qualified service personnel under the following

conditions:

–When the power cord or plug is damaged or

frayed.

–If liquid has been spilled or objects have fallen

into the set.

–If the set has been exposed to rain or water.

–If the set has been subjected to excessive

shock by being dropped, or the cabinet has

been damaged.

–If the set does not operate normally when

following the operating instructions, adjust only

those controls that are specified in the

operating instructions. Improper adjustment of

other controls may result in damage and will

often require extensive work by a qualified

technician to restore the set to normal

operation.

–When the set exhibits a distinct change in

performance, this indicates a need for service.

Servicing–Do not attempt to service the set

yourself as opening or removing covers may

expose you to dangerous voltage or other

hazards.

Refer all servicing to qualified service personnel.

Replacement of parts–When replacement of

parts is required, be sure the service technician

has used replacement parts specified by the

manufacturer that have the same characteristics

as the original parts. Unauthorized substitutions

may result in fire, electric shock, or other

hazards.

Safety Check–Upon completion of any service

or repairs to the set, ask the service technician

to perform routine safety checks (as specified by

the manufacturer) to determine that the set is in

safe operating condition.

FRAYED OR CUT

AC LINE

CRACKED PLUG

IMPORTANT NOTES

• Audio-visual material may include works of copyright which must NOT be recorded without the authority of the owner of copyright.

• Note that main voltage is supplied to the unit whenever the main plug is connected to the supply socket.

• To avoid the risk of fire or electric shock, do not expose the unit to rain or moisture.

• Do not attempt to open the cabinet. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.

• Keep the unit away from radiators or other sources of heat.

• Do not operate or store the unit close to strong magnetic fields.

• Do not spill liquid of any kind onto the unit. If liquid is accidentally spilled onto the unit, immediately remove the main plug from the

supply socket, and consult a qualified service engineer.

• Avoid places subjected to strong vibration.

• Do not place anything heavy on the VCP.

• Use the video cassette player in a horizontal (flat) position only.

• Before operating, remove any paper wrapping which may have been affixed to the player during manufacturing.

DO NOT COVER VENTILATION OPENINGS ON TOP AND SIDES OF THE PLAYER DURING OPERATION.

• When a cassette is inserted into the loading compartment, the power is switched on automatically as long as the power cord is plugged

into an AC outlet. DO NOT force a cassette into the compartment when the power cord is unplugged.

• Keep the player and video cassette away from strong magnetic fields.

• After playing a video cassette, remove it from the player. DO NOT move the player with a cassette in the compartment.

• Store video cassettes in their sleeves or cases and position vertically.

• If a cassette has been subjected to cold temperature, allow it to warm to room temperature before recording or playback.

For your protection, record the model and serial numbers of your video

cassette player here. In the event your player requires servicing or is stolen,

you may need this information. You may also wish to clip or staple your

sales receipt to this page.

Model Number:

Serial Number:

Date Purchased:

Store’s Name and Address:

ACCESSORIES

OWNER'S MANUAL

1. INSTRUCTION MANUAL 2. REMOTE CONTROL 3. RF CABLE 4. BATTERIES (AAA SIZE)

INTRODUCTION

CONGRATULATIONS on your purchase of a new VHS VCP.

This VCP is an existing, new VCP designed to satisfy all your VHS tape play and recording needs.

And, with proper used and care, your new VCP will offer many year of viewing enjoyment.

Just a few of the feature include.

• NTSC PLAYBACK ON PAL TV:

You can playback not only PAL tape but NTSC tape on PAL TV.

• LINE RECORDING (REAR OR FRONT AV JACK )

• NTSC 3.58 RECORDING & PLAYBACK

You can record not only PAL/MESECAM but NTSC (3.58).

• QUICK START

Various operation keys operate quickly when each of them is pressed.

• DIGITAL AUTO TRACKING

This VCP plays clear pictures without special operations.

• AC POWER SUPPLY (AC 90-250V~)

• COMPLETE SAFETY DEVICE

When this VCP is not in normal condition, it stops operating automatically for self-protection.

• SELF PICTURE ADJUSTMENT

Since the HEAD DRUM rotates regularly depending on the voltage change or tape condition, the picture is always stable.

• ENCORE FUNCTION

Press the ENCORE key on the remote control to watch the desired picture once more during playback.

• BUILT-IN WIDE RANGE MODULATOR (CH. 22- CH. 40)

• BUILT-IN MULTI RF OUT MODULATOR (PAL-G/K/I)

• AUTO REPEAT SEARCH FUNCTION

If you press the A.REPEAT key during playback,the tape will be replayback after rewinding .

• 2 STEP PICTURE SEARCH

TABLE OF CONTENTS

NOTE: This Video Cassette Player is compatible with any Video Cassette Player bearing the VHS mark. The VCP is designed to expand your

opportunities for home viewing and not for any usage which might violate the copyright laws.

Save the original shipping carton and packing materials; they will come in handy if you ever have to ship your VCP. For maximum protection,

repack the set as it was originally packed at the factory.

DRAWING YOUR ATTENTION..................................................................................................................................................................................1

IMPORTANT SAFEGUARDS......................................................................................................................................................................................2

INTRODUCTION.........................................................................................................................................................................................................8

TABLE OF CONTENT .................................................................................................................................................................................................9

IDENTIFICATION......................................................................................................................................................................................................10

TO GET STARTED....................................................................................................................................................................................................17

CHANNEL SETTING ................................................................................................................................................................................................18

BASIC OPERATION..................................................................................................................................................................................................19

SPECIAL OPERATION..............................................................................................................................................................................................23

PICTURE ADJUSTMENT.........................................................................................................................................................................................26

VIDEO SYSTEM.......................................................................................................................................................................................................27

RECORDING TV PROGRAMS..................................................................................................................................................................................28

BEFORE CALLING SERVICE PERSONNEL...............................................................................................................................................................32

SPECIFICATION.......................................................................................................................................................................................................33