Daewoo DV-S103W Series Manual de usuario

Video Cassette Player

DV-S103W

PAL NTSC

OWNER MANUAL

DRAWING YOUR ATTENTION

Thank you purchasing this VCP, develloped to provide advanced features and functions for high quality performance.

To obtain the best results and to avoid malfunction, PLEASE CAREFULLY READ THE DESCRIPTIONS AND OPERATING

PROCEDURE CONTAINED IN THIS OWNER’S MANUAL PRIOR TO OPERATING THIS VCP.

Caution: To prevent electric shock do not use this polarized plug with an extension cord receptacle or other outlet

unless the blades can be fully inserted to prevent blade exposure.

Warning: This video cassette player should be used with AC 90-250V~, 50/60Hz.

To prevent electric shocks and fire hazards, do NOT use any other power source.

Caution: Any changes or modification in construction of device which are not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

When you are not using the VCP for along period, it is recommended that you disconnect the power cord

from the AC outlet.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN

OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE OF THE ENCLOSURE. DO

NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

The lightning flash with arrowhead symbol an equilateral

triangle is intended to alert the user to the presence of

uninsulated “dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intend to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

RISK OF ELECTRIC SHOCKS

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

IMPORTANT SAFEGUARDS

For your protection, please read these safety instructions completely before operating the appliance, and keep this

manual for future reference.

Carefully observe all warnings, precautions, and instructions on the appliance, or the ones described in the

operating instructions and adhere to them.

USE

Power Sources–This set should be operated

only from the type of power source indicated on

the marking label. If you are not sure of the type

of electrical power supply at your home, consult

your dealer or local power company. For those

sets designed to operate from AC 90-250V~,

50/60 Hz.

Grounding or Polarization–This set is equipped

with a polarized AC power cord plug (a plug

having one blade wider than the other), or with a

threewire grounding type plug (a plug having a

third pin for grounding).

Follow the instructions below.

Overloading–Do not overload wall outlets,

extension cords or convenience receptacle

beyond their capacity, since this can result in fire

or electric shock.

Object and Liquid Entry–Never push objects of

any kind into the set through openings as they

may touch dangerous voltage points or shart out

parts that could result in a fire or electric shock.

Never spill liquid of any kind on the set.

Attachments–Do not use attachments not

recommended by the manufacturer, as they

may cause hazards.

Cleaning–Unplug the set from the wall outlet

before cleaning or polishing it. Do not use liquid

cleaners or aerosol cleaners. Use a cloth lightly

dampended with water for cleaning the exterior

of the set.

AC 90-250V~?

UNPLUGUNPLUG

Water and Moisture–Do not use powerline

operated sets near water-for example, near a

bathtub, washbowl, kitchen sink, laundry tub, in a

wet basement, or near a swimming pool, etc.

Accessories–Do not place the set on an unstable

cart, stand, tripod, bracket, or table. The set may

fall, causing serious injury to a child or an adult,

and serious damage to the set. Use only a cart

stand, tripod, bracket, or table recommended by

the manufacturer.

Ventilation–The slots and openings in the cabinet

are provided for necessary ventilation. To ensure

reliable operation of the set, and to protect it from

overheating, these slots and openings must never

be blocked or covered.

– Never cover the slots and openings with a cloth

or other materials.

– Never block the slots and openings by placing

the set on a bed, sofa, rug or other similar

surface.

Portable Cart Warning–An appliance and cart

combination should be moved with care. Quick

stops, excessive force, and uneven surfaces may

cause the appliance and cart combination to

overturn.

–Never place the set in a confined space such as

a bookcase, or built-in cabinet unless proper

ventilation is provided.

Power-Cord Protection–Route the power cord in

order not to be walked on or pinched by items

placed upon or against them, paying particular

attention to the plugs, receptacles, and the point

where the cord exits from the appliance.

–Do not place the set over a radiator or heat

In the normal temperature, if you pour a cold

liquid into a glass, water vapour in the air will

condense on the surface of the glass. This is

moisture condensation. The moisture

condensation may occur inside of VCPs, if used in

this condition, it will cause damage to the head

and the tape.

In case of moving the VCP from a cold place to

heated place,

Or the temperature of surroundings goes up due

to room heating switched on.

Or moving the VCP suddenly from air conditioned

room to a place of high temperature of humidity in

summer.

When the moisture condensation occurs inside of

the VCP, NEVER insert the cassette into the

cassette compartment. Remove the cassette, if

loaded, by pressing the STOP/EJECT key. Only

operate the VCP after the moisture condensation

has completely dried out. Normally, it takes about

2 hours.

MOISTURE CONDENSATION

When does the

mositure conden-

sation occur

inside of the VCP?

Damage Requiring Service–Unplug the set from

the wall outlet and refer servicing to qualified

service personnel under the following conditions:

–When the power cord or plug is damaged or

frayed.

–If liquid has been spilled or objects have fallen

into the set.

–If the set has been exposed to rain or water.

–If the set has been subjected to excessive shock

by being dropped, or the cabinet has been

damaged.

–If the set does not operate normally when

following the operating instructions, adjust only

those controls that are specified in the operating

instructions. Improper adjustment of other

controls may result in damage and will often

require extensive work by a qualified technician

to restore the set to normal operation.

–When the set exhibits a distinct change in

performance, this indicates a need for service.

Servicing–Do not attempt to service the set

yourself as opening or removing covers may

expose you to dangerous voltage or other

hazards.

Refer all servicing to qualified service personnel.

Replacement of parts–When replacement of

parts is required, be sure the service technician

has used replacement parts specified by the

manufacturer that have the same characteristics

as the original parts. Unauthoized substitutions

may result in fire, electric shock, or other hazards.

Safety Check–Upon completion of any service or

repairs to the set, ask the service technician to

perform routine safety checks (as specified by the

manufacturer) to determine that the set is in safe

operating condition.

SERVICE

SERVICE DEPT

ALL SETS RECEIVE

OUR OK

SAFETY CHECK.

FRAYED OR CUT

AC LINE

CRACKED PLUG

IMPORTANT NOTES

•Audio-visual material may include works of copyright which must NOT be recorded without the authority of the owner of copyright.

•Note that main voltage is supplied to the unit whenever the main plug is connected to the supply socket.

•To avoid the risk of fire or electric shock, do not expose the unit to rain or moisture.

•Do not attempt to open the cabinet. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.

•Keep the unit away from radiators or other sources of heat.

•Do not operate or store the unit close to strong magnetic fields.

•Do not spill liquid of any kind onto the unit. If liquid is accidently spilled onto the unit, immediately remove the main plug from the

supply socket, and consult a qualified service engineer.

•Avoid places subjected to strong vibration.

•Do not place anything heavy on the VCP.

•Use the video cassette player in a horizontal (flat) position only.

•Before operating, remove any paper wrapping which may have been affixed to the player during manufacturing.

DO NOT COVER VENTILATION OPENINGS ON TOP AND SIDES OF THE PLAYER DURING OPERATION.

•When a cassette is inserted into the loading compartment, the power is switched on automatically as long as the power cord is

plugged into an AC outlet. DO NOT force a cassette into the compartment when the power cord is unplugged.

•Keep the player and video cassette away from strong magnetic fields.

•After playing a video cassette, remove it from the player. DO NOT move the player with a cassette in the compartment.

•Store video cassettes in their sleeves or cases and position vertically.

•If a cassette has been subjected to cold temperature, allow it to warm to room temperature before recording or playback.

For your protection, record the model and serial numbers of your

video cassette player here. In the event your player requires servicing

or is stolen, you may need this information. You may also wish to clip

or staple your sales receipt to this page.

Model Number:

Serial Number:

Date Purchased:

Store’s Name and Address:

ACCESSORIES

2. REMOTE CONTROL 3. RF CABLE 4. BATTERIES (AAA SIZE)

1. INSTRUCTION MANUAL

OWNER'S MANUAL

INTRODUCTION

CONGRATULATIONS on your purchase of a new VHS VCP.

This VCP is an existing, new VCP designed to satisfy all your VHS tape play and recording needs.

And, with proper used and care, your new VCP will offer many year of viewing enjoyment.

Just a few of the feature include.

• NTSC PLAYBACK ON PAL TV:

You can playback not only PAL tape but NTSC tape on PAL TV.

• LINE RECORDING (REAR OR FRONT AV JACK )

• NTSC 3.58 RECORDING & PLAYBACK

You can record not only PAL/MESECAM but NTSC (3.58).

• QUICK START

Various operation keys operate quickly when each of them is pressed.

• DIGITAL AUTO TRACKING

This VCP plays clear pictures without special operations.

• AC POWER SUPPLY (AC 90-250V~)

• DC (12V) POWER SUPPLY

• COMPLETE SAFETY DEVICE

When this VCP is not in normal condition, it stops operating automatically for self-protection.

• SELF PICTURE ADJUSTMENT

Since the HEAD DRUM rotates regularly depending on the voltage change or tape condition, the picture is always

stable.

• ENCORE FUNCTION

Press the ENCORE key on the remote control to watch the desired picture once more during playback.

• BUILT-IN WIDE RANGE MODULATOR (CH. 22- CH. 40)

• BUILT-IN MULTI RF OUT MODULATOR (PAL-G/K/I)

• AUTO REPEAT SEARCH FUNCTION

If you press the A.REPEAT key during playback,the tape will be replayback after rewinding .

• 2 STEP PICTURE SEARCH

TABLE OF CONTENTS

NOTE: This Video Cassette Player is compatible with any Video Cassette Player bearing the VHS mark. The VCP is

designed to expand your opportunities for home viewing and not for any usage which might violate the copyright laws.

Save the original shipping carton and packing materials; they will come in handy if you ever have to ship your VCP. For

maximum protection, repack the set as it was originally packed at the factory.

DRAWING YOUR ATTENTION........................................................................................................................................1

IMPORTANT SAFEGUARDS...........................................................................................................................................2

INTRODUCTION..............................................................................................................................................................8

TABLE OF CONTENTS ...................................................................................................................................................9

IDENTIFICATION...........................................................................................................................................................10

TO GET STARTED.........................................................................................................................................................17

CLOCK SETTING ..........................................................................................................................................................18

VIDEO CHANNEL SETTING..........................................................................................................................................19

BASIC OPERATION.......................................................................................................................................................20

SPECIAL OPERATION...................................................................................................................................................24

PICTURE ADJUSTMENT...............................................................................................................................................27

VIDEO SYSTEM.............................................................................................................................................................28

RECORDING TV PROGRAMS.......................................................................................................................................29

BEFORE CALLING SERVICE PERSONNEL..................................................................................................................33

SPECIFICATIONS..........................................................................................................................................................34