Daewoo DSL-15D3 Manual de usuario
LCD TELEVISION
INSTRUCTION MANUAL
DSL-15D3
DSL-17D3
DSL-20D3
DSL-15D4
DSL-17D4
DSL-20D4
PAL B/G, D/K, I/I,
SECAM B/G, D/K, L/L’, NTSC(AV)
TELETEXT
SCART/VIDEO/S-VIDEO/COMPONENT/PC
MULTI-LANGUAGE OSD
Caution
WARNING:To reduce the risk of fire or electric shock hazard, do not expose this appliance
to rain or moisture.
2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK .
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous oltage” with-
in the product’s enclosure that may be of sufficient magnitude to constitute a risk
electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and ser icing instructions in the literature
accompanying the appliance.
Safety
Precautions
1. CLEANING
Unplug this TV equipment from the AC power outlet before cleaning.
Do not use liquid cleaner or aerosol cleaners. Use a soft and damp cloth for
cleaning.
2. ATTACHMENTS
Do not use attachments not recommended by the TV equipment manufacturer
as they may result in the risk of fire, electric shock or other injury.
3. WATER AND MOISTURE
Do not place this TV equipment near water, for example, near bathtub,
kitchen sink, laundry tub, in a wet basement, or near a swimming pool, or
the like.
4. HEAT
Keep the TV equipment away from the heat sources such as radiator, heater,
sto es and other heat-generating products.
5. SETTING
Do not place this TV on unstable cart, stand, or table. Placing the TV on an
unstable base can cause the TV to fall, resulting in serious personal injuries
as well as damage to the TV. Use only a cart, stand, bracket or table
recommended by the manufacturer or salesperson.
6. WALL OR CEILING MOUNTING
When mounting the product on a wall or ceiling, be sure to install the
product using the designated mounting tool according to the method
recommended by the manufacturer.
7. POWER
This TV equipment should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supplied to your home, consult your TV dealer or local power company.
8. PIXEL
The LCD panel is a ery high technology product with 2,359,296(15")
2,949,120(17”) 1,440,000(20”) thin film transistors which gi e you fine
picture details. Occasionally, a few non-acti e pixels may appear on the
screen as a fixed point of blue, green or red please note that this does not
affect the performance of your product.
9. SET MOVING
When mo ing the product, place your fingers of one hand in the socket on
the back of the CTV and support the front of the TV with the other hand.
3
Contents
IMPORTANT SAFEGUARDS 5
SUPPLIED ACCESSORIES 6
FUNCTIONAL OVERVIEW 7
Front (Control panel) 7
Remote controller 8
PREPARATION 9
Inserting Batteries into the Remote Control Unit 9
Mains connection 9
Aerial connection 10
Connecting external equipment 12
INSTALLATION 14
Language selection 14
Automatic Tuning of TV Channels 14
Programme Editing 15
Manual Tuning 16
DAILY USE 18
Switching On and Off 18
Recall 18
Programme Selection 19
Picture Control 19
Sound Control 20
Special Features 21
Time setting 21
Wake up time setting 22
Sleep 22
Teletext (Option) 23
PC setup 25
WALL/ARM MOUNTING 27
TROUBLESHOOTING 28
PRODUCT SPECIFICATIONS 29
4
Important
Safeguards
Location
Heat, Moisture, Dust, Vibration
Position your set so that bright light or sunlight doesn't fall directly onto the screen.
Care should be taken not to expose the set to any unnecessary ibration, moisture, dust or
heat.
Do not expose the set to dripping or splashing.
Ventilation
Also ensure that the set is placed in a position to allow a free flow of air.
Do not co er the entilation openings on the back co er.
Lea e at least 10 cm around each side of the TV set.
Mounting
This set can be positioned by using the table top stand or wall mounting bracket.
When you install the set using the wall mounting bracket, fix it carefully so it is secure.
Object Entry
Do not insert foreign objects, such as needles and coins, into the entilation openings.
Lightning striking
You should disconnect your set from the mains and the aerial system during thunderstorms.
Cleaning
Unplug the set from the mains before cleaning.
Dust the set by wiping the LCD screen and the cabinet with a soft, clean cloth.
If the screen requires additional cleaning, use a clean, damp cloth.
Do not use liquid cleaners or aerosol cleaners.
Do not rub or strike the LCD with anything hard as this may scratch, or damage the LCD
permanently.
Service
Ne er remo e the back co er of the set as this can expose you to high oltage and other
hazards.
If the set does not operate properly,unplug it and call your dealer.
5
Supplied
Accessories
Make sure that the following accessories are provided with the product.
6
AC cord
AC cord
AC/DC adapter
123
456
789
RECALL
SLEEP
PC
MUTE POWER
VOL VOL
PR
PR
NORMAL
S.MODEASPECT
X?
MENU
0
Remote controller
Batteries (Option)
(2x1.5V, AAA)
Instruction manual
Functional
Overview
Front (Control panel
7
Remote
sensor LED
indicator
PR MENU
Power
On/Off PR
Up/Down Volume
Up/Down AV MENU
Functional
Overview
Remote Controller
[ ] : Teletext function
8
123
456
789
RECALL
SLEEP
PC
MUTE POWER
VOL VOL
PR
PR
NORMAL
S.MODEASPECT
X?
MENU
0
MUTE POWER
MENU
UP (PR UP) [PAGE UP]
LEFT(VOLUME DOWN) RIGHT(VOLUME UP)
AV
DOWN(PR DOWN)
[PAGE DOWN]
NORMAL
[HOLD]
SOUND MODE[SIZE]
[TELETEXT]
[INDEX]
PC
NUMBER[PAGE]
SLEEP[SUBPAGE]
RECALL
ASPECT[MIX]
[CANCEL]
[REVEAL]
Preparation
Inserting Batteries into the Remote Control Unit
Mains Connection
1. Connect the DC plug of the AC adaptor to the DC 12V(DC 15V-only 20” input terminal of
the set.
2. Connect the AC adaptor and AC cord.
3. Plug the other end of AC cord into a Power outlet with 100V - 240V AC, 50/60Hz.
9
To load the batteries, turn the remote control
handset o er and open the battery compartment.
Insert the batteries (Two 1.5 , type R03 or AAA).
Make sure that the polarity matches with the (+)
and (-) marks inside of the battery compartment.
Note: To a oid damage from possible battery
leakage, remo e the batteries if you do not
plan to use the remote control handset for
an extended period of time.
Power outlet AC Adapter
AC Cord
DC 12V input terminal
(DC 15V-only 20”)
Preparation
Aerial Connection
CONNECTING THE TV DIRECTLY TO AN AERIAL
Connect an aerial cable (75 ohm coaxial cable) to the Aerial terminal on the back of the TV
set.
10
Aerial cable
Aerial Terminal
Aerial
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Televisor LCD de Daewoo
Daewoo
Daewoo DLP-32G1P Manual de usuario
Daewoo
Daewoo DLV-32C7SMB/LMB Manual de usuario
Daewoo
Daewoo DSL-15D1T Manual de usuario
Daewoo
Daewoo DSL15M1TC Manual de usuario
Daewoo
Daewoo L32R630 series Manual de usuario
Daewoo
Daewoo DSL-15D1T Manual de usuario
Daewoo
Daewoo DLM-32C5LPB Manual de usuario
Daewoo
Daewoo DLP-26C2 Manual de usuario
Daewoo
Daewoo DLA-32C7LAB Manual de usuario
Daewoo
Daewoo DLX-20J1BHS Manual de usuario
Daewoo
Daewoo L32S645WTE Manual de usuario
Daewoo
Daewoo DSL15M1TC Manual de usuario
Daewoo
Daewoo DSL-20D3 Manual de usuario
Daewoo
Daewoo DLP-32C2AMSB Manual de usuario
Daewoo
Daewoo DLP-26C2 Manual de usuario
Daewoo
Daewoo DLP-17D3 Manual de usuario
Daewoo
Daewoo DLM-32C3 Series Manual de usuario
Daewoo
Daewoo LM32L1 Series Manual de usuario
Daewoo
Daewoo DSL19M1WC Manual de usuario
Daewoo
Daewoo LM32L1 Series Manual de usuario
