▯Intended Use
The product is designed for use both indoors and outdoors. The
product is intended purely for private use and not for commercial
purposes or other usage.
The portable work light is not suitable for lighting rooms within a
household.
▯Observe the Safety Information
Read and observe all the safety information to protect yourself
and the environment from any harm. Refer to the information
sheet enclosed for the relevant information on safety.
WARNING! RISK OF FATAL INJURY THROUGH ELECTRIC
SHOCK!
NEVER use the power adapter
if you suspect damage to
the power adapter
or see damage to the power
adapter
.
▸Do not put the device into operation if it is damaged.
▸Never open or repair the power adapter
yourself.
▸Never touch the bare contacts with metallic objects.
▸Never plug in or unplug the power adapter
with wet hands.
IMPORTANT! RISK OF PROPERTY DAMAGE THROUGH
ENVIRONMENTAL INFLUENCES!
Unfavourable environmental inuences could cause damage to
the power adapter
or impair its function.
▸Prevent exposing the device to environmental inuences such as
smoke, dust, vibration, chemicals, moisture, heat or direct sunlight.
▸The power adapter
is not waterproof so keep it dry.
▯General View
The illustration depicts the work light in detail.
Housing
Status indicator
USB cable
Handle
Micro USB port
Power adapter
Protective cover
Press switch
USB-A connector
Legs
▯Checking the Package Contents
Check the package contents carefully before putting the device
into operation. If anything is missing or damaged, please contact
our Service partners.
▸1 × work light (including built-in Li-ion battery)
▸1 × USB cable
▸1 × power adapter
▸1 × transport case
▸1 × manual
▯Charging the Work Light
The work light is equipped with a permanently built-in Li-ion bat-
tery. The battery must be fully charged before being used for the
rst time.
The four LEDs of the status indicator
indicate the charge status
of the Li-ion battery.
1. Open the protective cover
.
2. Connect the USB cable
to the micro USB port
.
3. Connect the USB cable
to the power adapter
supplied via
the USB-A port.
4. Plug the power adapter
into a power socket.
5. During the charging process, one of the four LEDs of the status
indicator
ashes.
6. Disconnect the USB cable
from the micro USB port
when
the charging process has nished. When the Li-ion battery is
fully charged, all four LEDs in the status indicator
light up
continually.
7. Close the protective cover
.
Charge the work light each time after it has been used.
The work light only fulls the requirements of the type of protec-
tion specied when the protective cover
is closed.
▯Operating the Work Light
You can transport the work light comfortably using the handle
.
The fold-out legs
ensure the work light stands securely.
The work light can operate in the following three operating modes
which are selected by pressing the press switch
.
The switching cycle of the work light operating modes is as follows:
Operating mode 1 èOperating mode 2 èOperating mode 3 è O
Operating
mode 1 COB working light (middle)
Operating
mode 2 COB working light (ring)
Operating
mode 3 Red ashing light
Press the press switch
as often as necessary until the required
mode is activated.
Powerbank Function
The work light is provided with a powerbank function to charge
mobile devices via USB.
1. Open the protective cover
.
2. Connect the device to be charged to the USB-A connector
using a USB cable. During the charging process, the four LEDs of
the status indicator
light up.
3. Disconnect the USB cable from the micro USB-A connector
when the charging process has nished.
4. Close the protective cover
.
The work light only fulls the requirements of the type of protec-
tion specied when the protective cover
is closed.
GG G
GG
G
▯Technical Data
Designation WLG302 portable work light
Main material Aluminium and ABS
Weight 881 g
Dimensions 193 x 180 x 65 mm
Battery 3 × type 18650 (2200 mAh), built-in
Illuminant
(not replaceable)
20W COB work light
Lighting period Approx. 4.5 hours (compliant with ANSI
standard)
Lighting range Max. 70 meters (compliant with ANSI
standard)
Brightness Max. 1500 lumen
Service life (LED) Approx. 50,000 hours
Functions 3 operating modes (COB working light
(middle), COB working light (ring), red
ashing light)
Powerbank function
Type of protection IP55 (dustproof and splashproof)
▯Manufacturer
GO Europe GmbH
Zum Kraftwerk 1
D-45527 Hattingen
GERMANY
910
1 2 3
4
5
6
7
8
Portable Work Light
▯For Your Safety
Read the operating manual thoroughly and observe the
information contained when using the device. Keep the
manual close by for future reference.
Refer to the information sheet enclosed for important information
on the subjects of safety, disposal, guarantee and product care.
G
GO Europe GmbH
Zum Kraftwerk 1
45527 Hattingen
GERMANY
11 / 2020
Art.-No. 40409
20201111_uni_taschenlampe_wlg302.indd 220201111_uni_taschenlampe_wlg302.indd 2 11.11.2020 10:00:0411.11.2020 10:00:04
