D-Link DSL-G804V Manual de usuario

This product works with the following

operating system software: Windows

98, Windows NT, Windows 2000,

Windows Me and Windows XP. DSL-G804V

Wireless ADSL Route

Check Your Package Contents

These are the items included with your purchase:

If any of the below items are missing, please contact your reseller.

L-

804V Wireless AD

L Route

CD-ROM (Quick Install Guide and Manual)

One Ethernet (CAT5 UTP Straight-through)

Cable

One ADSL Cable

(standard telephone cable)

One Console (PS/2-RS232) Cable

Using a power adapter

with diffe

ent voltage

rating will damage and

void the warranty for this

product.

12V, 1A

Power Adapter

holders. Software and specifications subject to change without notice.

Connecting the Router to your

Computer

A、First, connect the power adapter to the power input at the back panel of the

DSL-G804V and then plug the other end of the power adapter to a wall outlet

or power strip.On the front of the device, the power LED will turrn ON to

indicate proper operation.

B、Insert one end of the Ethernet cable into an Ethernet(LAN) port on the back

panel of the DSL-G804V and the other end of the cable to an Ethernet Adapter

or available Ethernet port on your computer.

C、Insert the telephone cable included with the Router into the ADSL port, then

connect the cable to your telephone line.

D、Check the LED display on the front of the Router to confirm that the

connections have been made.

Rear Panel Connections

Antenna

Omni Directional

ADSL Modem

Port

Connect to your

ADSL provider

Console Port

Connect to

PS2/RS-232

LAN Ports

Connects to the

LAN and other

computers

DC Power Input

Connect to DC

Adapter

Factory Reset

Push in 5 seconds to

return to factory

default settings

Connecting the Router to your

Computer (continued)

Front Panel LEDs

Power Steady green light indicates the unit is powered on. When the device

is powered off this remains dark.

Status

Lights steady green during power on self-test (POST). Once the

connection status has been settled, the light will blink green. If the

indicator lights steady green after the POST, the system has failed

and the device should be rebooted.

ADSL:

Link/Act

Steady green light indicates a valid ADSL connection. This will light

after the ADSL negotiation process has been settled. A blinking

green light indicates activity on the WAN (ADSL) interface.

WLAN Lit green when the wireless connection is established. A blinking

green when sending/receiving data.

LAN 1 - 4:

Link/Act

Green: The router has a successful 100Mb Ethernet connection. A

solid green light indicates a valid link on startup. These lights blink

when there is activity currently passing through the Ethernet port.

Orange: The router has a successful 10Mb Ethernet connection. A

solid green light indicates a valid link on startup. These lights blink

when there is activity currently passing through the Ethernet port.

PPP/MAIL Lit steady when there is a PPPoA / PPPoE connection. Lit and

flashed periodically when there is email in the Inbox

Configuring the Router

You have two methods to configure your router. The one is you can use the

Configuration Utility which is contained in the CD-ROM and follow the instructions

step by step to easy configure your router.

The other one is to use your Web browser to access the web pages used to setup the

Router, your computer must be configured to “Obtain an IP address automatically”,

that is, you must change the IP network settings of your computer so that it is a DHCP

Client. If you are using Windows XP and do not know how to change your network

settings, skip ahead to Appendix A and read the instructions provided. You may also

read the User Manual for instructions on changing IP settings for computers running

Windows operating systems.

Open the web browser and

type http://192.168.1.1 in

the browser’s address box.

This number is the default IP

address for this router.

Press Enter.

A user name and password

window will appear. The

default User Name and

Password are “admin” and

“admin”. Press OK to logon

to the router.

Click OK

Configuring the Router (continued)

Once you have logged in, the Home directory tab is prominent with the Setup Wizard

menu displayed. Most users will be able to use the Setup Wizard to establish the

ADSL connection to your ISP. To begin using the Setup Wizard, click on the Run

Wizard button in the middle of the web page. A pop-up menu will appear. This pop-up

menu is the Setup Wizard. The Setup Wizard procedure consists of four general

steps:

1. Set your new password

2. Set Internet connection

3. Set Wireless connection

4. Save configuration

When you setup the Internet connection, you will need to enter information provided by

your ISP. The type of information you need depends on the type of connection you are

setting up.

Click on the Run Wizard button.

Configuring the Router (continued)

The first window of the Setup Wizard menu lists a summary of the steps required to

complete the setup. Click the Next button to begin setup and go on to step 1.

Click the Next button.

Configuring the Router (continued)

The factory default password is admin, you may like change the the password by

entering in a new password.

Click the Next button.

Configuring the Router (continued)

You will see the Detecting Internet Connection Type Screen.

Next, you need to select and set the Internet Connection Type for the WAN

interfaces. Your ISP has given this information to you. If you do not know what type of

connection to use, exit the Set Wizard and contact your ISP for the information. The

Setup Wizard menu that appears when you click the next button depends on what

connection type you select.

Select the Connection Type used

for

our

DSL service.

Click the Next button.

Configuring the Router (continued)

PPPoE/PPPoA Connections

Type in the Username and Password used to identify and verify your account to the

ISP. The VPI number and VCI number should not be changed unless you have been

instructed by ISP to change them. Select the Connection Type used for

encapsulation specific to your service. Click Next when you are ready to continue to

the Setup Completed menu. If you are not sure what Connection Type,VPI and VCI

to use, please check with your ISP.

Type the

PI and

VCI, if these

values are not

correct, check

with your ISP for

information.

Type the

Username and

Password for

your ISP

account.

ype the IP addresses for the

AN IP Address, Subne

Mask, ISP Gateway

Address, Primary DNS

Address and/or Secondary

DNS Address, as instructed

by your ISP.

Use the pull-

down menu to

choose the

correct

Connection

Type. The user

may choose

between PPPoE

or PPPoA, as

instructed by

your ISP.

Click the Next button.

Configuring the Router (continued)

MPoA/IPoA

For this connection type, the user may choose MPoA or IPoA. The VPI number and

VCI number should not be changed unless you have been instructed by ISP to change

them. Select the Connection Type used for encapsulation specific to your service.

Click Next when you are ready to continue to the Setup Completed menu.If you are

not sure what Connection Type,VPI and VCI to use, please check with your ISP.

Type the

PI and

VCI, if these

values are not

correct, check

with your ISP for

information.

ype the IP addresses for the

AN IP Address, Subne

Mask, ISP Gateway

Address, Primary DNS

Address and/or Secondary

DNS Address, as instructed

by your ISP.

Use the pull-

down menu to

choose the

correct

Connection

Type. The user

may choose

between MPoA

or IPoA, as

instructed by

your ISP.

Click the Next button.

Otros manuales para DSL-G804V

Tabla de contenidos

Idiomas:

Otros manuales de Enrutador inalámbrico de D-Link

D-Link

D-Link VoIP Wireless Router DVG-G5402SP Manual de usuario

D-Link

D-Link DSL-2640/NRU Manual

D-Link

D-Link DIR-615 - Wireless N Router Manual de usuario

D-Link

D-Link COVR-2202 Manual de usuario

D-Link

D-Link DI-624M - Wireless 108G MIMO Router Manual de usuario

D-Link

D-Link DIR-330 - Wireless G VPN Router Manual de usuario

D-Link

D-Link DAP-1250 Manual de usuario

D-Link

D-Link DVG-N5402SP Manual de usuario

D-Link

D-Link DIR-810L Manual de usuario

D-Link

D-Link DWR-932 Manual de usuario

D-Link

D-Link GO-RT-N300 Manual de usuario

D-Link

D-Link DIR-835 Manual de usuario

D-Link

D-Link AC1750 Manual de usuario

D-Link

D-Link DIR-X1550 Manual de usuario

D-Link

D-Link DI-713 Manual de usuario

D-Link

D-Link DVG-G1402S - Wireless Broadband VoIP Router Guía rápida

D-Link

D-Link DI-724P Manual de usuario

D-Link

D-Link DIR-412 Manual de usuario

D-Link

D-Link DIR-510L Manual de usuario

D-Link

D-Link SharePort DIR-825 Manual de usuario

D-Link

D-Link DIR-905L Manual de usuario

D-Link

D-Link DIR-890L Manual de usuario

D-Link

D-Link AirPlus DI-714P+ Manual de usuario

D-Link

D-Link EXO AX DIR-X4860-US Manual de usuario

Manuales populares de Enrutador inalámbrico de otras marcas

Milesight

Milesight UG67 Manual de usuario

Airlogic

Airlogic AirSync Class 1 Manual del propietario

Samsung

Samsung WCH730B Manual de usuario

TELEFONICA

TELEFONICA USB Adapter Manual de usuario

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manual de usuario

Askey

Askey RAC2V1K Manual de usuario

Alloy

Alloy WLF2454AP-S Manual de usuario

TP-Link

TP-Link TL-WR542G Manual de usuario

NETGEAR

NETGEAR WNR2000v4 Manual de usuario

Hama

Hama 53120 Manual de usuario

Intellinet

Intellinet 524582 Manual de usuario

Asus

Asus RT-N10P Manual de usuario

Sapido

Sapido GR297n Manual de usuario

Asus

Asus DSL-N55U Manual de usuario

AMTC

AMTC WR7502 Manual de usuario

Compaq

Compaq CP-2W - iPAQ Connection Point Manual de usuario

SMC Networks

SMC Networks WBR14-N2 FICHE Manual de usuario

Draytek

Draytek Vigor2120 Series Manual de usuario