D-Link DI-724P Manual de usuario
1 1
DI-724P
AirPlus G 2.4GHz Wireless
Router with Print server
5V DC Power Adapter
©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice.
Before You Begin
1. If you purchased this router to share your high-speed Internet connection with
other computers, you must have either an Ethernet-based Cable or DSL modem
with an established Internet account from an Internet Service Provider (ISP).
2. It’s best to use the same computer that is connected to your modem for configuring
the DI-724P Multimode Wireless Router. The DI-724P acts as a DHCP server
and will assign all the necessary IP address information on your network. See
Appendix at the end of this Quick Installation Guide or the Manual on the CD-
ROM for setting each network adapter to automatically obtain an IP address.
Check Your Package Contents
DI-724P AirPlus G 2.4GHz Wireless
Router
CD-ROM (containing Manual and
Warranty)
Ethernet (Straight Through) Cable
Using a power supply
with a different voltage
rating will damage and void
the warranty of this product.
If any of the above items are missing, please contact your reseller.
This product can be set up using
any current web browser, i.e.,
Internet Explorer 6 or Netscape
Navigator 6.2.3.
2
2
Connecting The DI-724P Wireless
Router To Your Network
A. First, connect the power adapter to the receptor at the back panel
of the DI-724P and then plug the other end of the power adapter to
a wall outlet or power strip. The Power LED will turn ON to indicate
proper operation.
B. Insert one end of an Ethernet cable to the WAN port on the back
panel of the DI-724P and the other end to the Ethernet port located
on your Cable or DSL modem. The WAN LED light will illuminate to
indicate proper connection.
C. Insert an Ethernet cable to LAN port 1 on the back panel of the DI-
724P and an available Ethernet port on the network adapter in the
computer you will use to configure the DI-724P. The LED light for LAN
Port 1 will illuminate to indicate proper connection. (Note: The WAN
Port and LAN Ports on the DI-724P are Auto-MDI/MDIX. Meaning you
can use a straight-through or crossover-cable to the WAN Port and
LAN Ports.
D. Computers equipped with 802.11b/g wireless adapters will be able to
connect to the DI-724P. The DWL-G650 AirPlus G Wireless Cardbus
Adapter and the DWL-G520 AirPlus G Wireless PCI Adapter will
be able to connect out of the box with the router using their default
wireless settings.
D. Antennas
Used to
wirelessly
connect to
802.11b/g
adapters.
C. LAN PORTS
These are the
connections for
Ethernet cables to
Ethernet enabled
computers.
Reset Button
Pressing this button restores
the Router to its original factory
default settings.
E. Printer Port
You can connect
a Printer to the
Parallel Port here.
A. Receptor for
Power Adapter.
B. WAN PORT
This is for the connection
of an Ethernet cable to
the Cable or DSL modem
2
2 3
Restart Your Computer
Connecting Additional Computers
To The DI-724P
Using additional Ethernet (CAT5 UTP) cables, connect your
Ethernet-equipped computers to the remaining Ethernet LAN
ports on the back panel of the DI-724P.
Status LED
- a blinking light
indicates that the
DI-724P is ready.
WLAN LED – a solid
light indicates that the
wireless segment is
ready. This LED blinks
during wireless data
transmission.
WAN LED – a
solid light indicates
connection on the
WAN port. This
LED blinks during
data transmission.
LOCAL NETWORK
LEDs – a solid light
on the port indicates
a connection to an
Ethernet enabled
computer on ports 1-4.
This LED blinks during
data transmission.
POWER LED – a solid
light indicates a proper
connection to the
power supply.
4
4
When you have completed the steps in this Quick Installation
Guide, your connected network should look similar to this:
Using The Setup Wizard
The logon pop-up screen will appear.
Open your Web browser and
type “http://192.168.0.1” into the
URL address box. Then press the
Enter or Return key.
Type “admin” for the username and
leave the password field blank.
Click OK
4
4 5
The Setup Wizard (continued)
Once you have logged in, the
Home screen will appear.
You will see the following screens
Set up your new password.
You have the option to
establish a password.
Click Run Wizard
Click Next
Click Next
6
6
The Setup Wizard (continued)
Select your Internet
Connection. You will be
prompted to select the type
of Internet connection for
your router.
Click Next
Choose your time zone from
the drop down list.
Click Next
If you are unsure of which setting
to select, please contact your Internet
Service Provider.
6
6 7
The Setup Wizard (continued)
If your ISP requires a
Static IP Address, and this
option is selected, then this
screen will appear:
Enter the IP address
information originally provided
to you by your ISP. You will
need to complete all the
required fields.
Click Next
If you selected Dynamic IP
Address, this screen will
appear: (Used mainly for
Cable Internet service.)
What is a MAC address? Each
network adapter has a discrete
Media Access Control (MAC)
address. Note that some computers
and peripherals may already include
built-in network adapters.
Click the “Clone MAC Address”
button to automatically copy the
MAC address of the network
adapter in your computer. You can
also manually type in the MAC
address.
Click Next
8
8
The Setup Wizard (continued)
If your ISP uses PPPoE
(Point-to-Point Protocol over
Ethernet), and this option is
selected, then this screen will
appear: (Used mainly for DSL
Internet service.)
Wireless Setup.
The default wireless settings
for your 802.11g wireless
network are:
SSID = default
Channel = 6
You can change these settings
to match an existing wireless
network.
Please be sure to remove any
existing PPPoE client software
installed on your computers.
Enter in the username and
password provided to you by
your ISP.
Click Next
Click Next
8
8 9
Your Setup is Complete!
If you wish to use encryption for your
802.11b/g network, the DI-724P is
capable of three levels of wireless
encryption - 64-bit, 128-bit and
256-bit. By default the encryption
is disabled. You can change the
encryption settings for more secure
wireless communication.
Click Next
The Setup Wizard (continued)
Click Restart
Click Continue
10
10
Test Internet Connection.
You will be returned to the Home tab.
For additional settings
or information, refer
to the Advanced,
Tools, or Status
tabs on the web-
management
interface; or to the
Manual located on
the CD.
Then relaunch your
Web browser (i.e.,
Internet Explorer or
Netscape Navigator),
to link to your favorite
Web site to test your
Internet connection.
Click to Exit
APPENDIX
Insert the installation CD-ROM into the
CD-ROM drive. The following window will
be shown automatically. If it is not, please
run “autorun.exe” on the CD-ROM.
Installing the Print Server Software
Click Install Print
Server Software
Otros manuales para DI-724P
1
Tabla de contenidos
Otros manuales de Enrutador inalámbrico de D-Link
D-Link
D-Link DAP-1620 Manual de usuario
D-Link
D-Link GO-DSL-AC750 Manual de usuario
D-Link
D-Link DIR-615 - Wireless N Router Manual de usuario
D-Link
D-Link DI-524 - AirPlus G Wireless Router Manual de usuario
D-Link
D-Link DIR-280 Manual de usuario
D-Link
D-Link COVR-C1210 Manual de usuario
D-Link
D-Link GO-DSL-AC750 Manual de usuario
D-Link
D-Link DIR-619L Manual de usuario
D-Link
D-Link DSL-2750E Manual de usuario
D-Link
D-Link DIR-836L Manual de usuario
D-Link
D-Link DAP-1620 Manual de usuario
D-Link
D-Link DVG-N5402SP Manual de usuario
D-Link
D-Link DIR-651 Manual de usuario
D-Link
D-Link DSL-2750U Manual
D-Link
D-Link DVG-N5412SP Manual de usuario
D-Link
D-Link DIR-880L Manual de usuario
D-Link
D-Link DIR-300 - Wireless G Router Manual de usuario
D-Link
D-Link DIR-822 Manual de usuario
D-Link
D-Link DVA-G3340S Manual de usuario
D-Link
D-Link DIR-615 - Wireless N Router Manual de usuario
