D-Link DAP-2230 Hoja de instrucciones

Otros manuales para DAP-2230

3

Este manual sirve para los siguientes modelos

7

Tabla de contenidos

Otros manuales de Punto de acceso inalámbrico de D-Link

D-Link

D-Link DWL-2200AP - AirPremier - Wireless Access... Manual de usuario

D-Link

D-Link DWL-1000AP Manual de usuario

D-Link

D-Link AirPremier DWL-00AP Manual de usuario

D-Link

D-Link DAP-3220 Manual de usuario

D-Link

D-Link NUCLIAS CONNECT DAP-2680 Manual de usuario

D-Link

D-Link DAP-2610 Manual de usuario

D-Link

D-Link AirPremier N DAP-2310 Manual de usuario

D-Link

D-Link DWR-956 Manual de usuario

D-Link

D-Link DAP-1665 Manual de usuario

D-Link

D-Link DWL-2600AP Manual de usuario

D-Link

D-Link DWL-8620AP Manual de usuario

D-Link

D-Link AirPremier DWL-7700AP Manual de usuario

D-Link

D-Link AirPremier DAP-2565 Manual de usuario

D-Link

D-Link DAP-2590 - AirPremier N Dual Band PoE Access... Manual de usuario

D-Link

D-Link DAP-1533 Manual de usuario

D-Link

D-Link DAP-1360 Manual de usuario

D-Link

D-Link DAP-1150 Manual de usuario

D-Link

D-Link DWL-700AP - Air - Wireless Bridge Manual de usuario

D-Link

D-Link AirPlus Xtreme G DWL-2000AP Manual de usuario

D-Link

D-Link DAP-1360 Manual de usuario

D-Link

D-Link xtreme n duo dap-1522 Manual de usuario

D-Link

D-Link DWL-6610AP Manual de usuario

D-Link

D-Link AirPremier N DAP-2360 Manual de usuario

D-Link

D-Link DWL-3500AP Manual de servicio

Manuales populares de Punto de acceso inalámbrico de otras marcas

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario

Draytek

Draytek VIGORAP 902 Manual de usuario

EnGenius

EnGenius EAP350 Manual de usuario

- 1 -

Manual to install the firmware

For DAP-2230 Rev.A, DAP-2310 Rev.B, DAP-2360 Rev.B, DAP-2610 Rev.A,

DAP-2660 Rev.A, DAP-2680 Rev.A, DAP-2695 Rev.A and DAP-3662 Rev.A

Important:

After the firmware upgrade the DAP can’t be used in a Central Wi-Fi Manager (CWM)

System or in an AP-Array System.

You would need to install the „not-NC-firmware“ into your DAP again.

See the attached manual

“Manual for Downgrade from Nuclias Connect Firmware.pdf”

Recommendation:

Connect the DAP and the PC, with it you make the firmware upgrade, with a LAN cable

with your network, there is also the DHCP server available.

For the installation of the firmware please follow this.

1. Get access to the setup of your DAP via web browser.

The default address is http://192.168.0.50 or when you already implemented the DAP

into your network please call the IP-address this you configured into you DAP or this the

DAP got from the DHCP server in you network.

2. By default the setup has no password.

At User name enter admin and then click onto Login.

Note:

Did you set an Admin-Password please enter this.

Do you don’t know the Admin-Password anymore you must reset the DAP to factory

defaults (Factory Reset).

For this press the Reset button of the running DAP for example with a paperclip or pencil

for 5-10 seconds.

- 2 -

3. At the top choose the menu Maintenance and then in the open menu

Firmware and SSL Certification Upload.

4. At Upload Firmware From File click onto Choose File.

Pick the previously un-zipped firmware file

DAP-2610_RevA_Firmware_200r063.bin

and click onto Upload.

5. The firmware will be installed now.

This takes close to 5 minutes.

6. Important:

You must reset the DAP to factory defaults (Factory Reset).

For this press the Reset button of the running DAP for example with a paperclip or pencil

for 5-10 seconds.

After the DAP is restarted it is ready to integrate into a Nuclias Connect environment.

- 3 -

If your DAP is build-in and you cant’t press the Reset button easily you

can reset it over the setup instead.

7. Log-in into the setup again.

At User name enter admin and then click onto Login.

Did you set an Admin-Password please enter it.

8. At System Country choose any country and click onto Update.

- 4 -

9. Please wait 2 minutes.

10. Log-in into the setup again.

At User name enter admin.

At Password please enter also admin.

From now this is the default Admin password until you configure the DAP new.

Click onto Login.

11. At the top choose the menu System.

Click onto Restore.

- 5 -

12. Click onto OK.

13. Please wait two minutes.

After the DAP is restarted it is ready to integrate into a Nuclias Connect environment.

To check the detailed version number of the installed version please log-in into the setup

of your DAP.

In the address line of your web browser enter

http://<ip-adresse>/version.txt

The <ip-adresse> is for the IP-address of your DAP.

A page with detailed information about the firmware appears.