D’amani DDO64FS Instrucciones de operación
USE AND MAINTENANCE
INSTRUCTIONS
FOR BUILT-IN OVENS
DDO64FS
DDO67MS
Dear Customer,
Congratulations on purchasing your new product from Think Appliances.
To register your parts and labour warranty (some conditions apply please refer to your
warranty card for more details) please contact out Customer Care team on:
1800 444 357
Our Customer Care centre is there to ensure you get the most out of your appliance. For
example, should you want to learn more about recommended cooking temperatures, the
various cooking functions available, how to set and program your LED clock, and importantly
taking care of your appliance when cleaning, please call us because we are here to help you.
It is important that you read through the following use and care manual thoroughly to
familiarize yourself with the installation and operation requirements of your appliance to
ensure optimum performance.
We also carry a complete range of spare parts for all Think products. For all your spare parts
enquiries please contact our team at Pronto Parts on:
1300 306 973
Again, thank you for choosing an appliance brought to you by Think Appliances and we look
forward to being of service to you.
Kind regards
Management
Think Appliances
GENERAL INFORMATION
Please read this booklet thoroughly before you use this appliance.
It is important that you understand all the control functions before
commencing to cook with your appliance.
Please remember the advice and warnings shown on page 5which
is headed ‘IMPORTANT – Warning and Safety Instructions’.
This appliance is designed for domestic household use and can be
built into a standard kitchen cabinet or housing unit.
NOTE: The adjacent furniture or the housing and all materials used
in the installation must be able to withstand a minimum
temperature rise of 85qC above ambient during periods of use.
Certain types of vinyl or laminate kitchen furniture are particularly
prone to heat damage or discolouration at temperatures below the
above guidelines.
Installing the appliance in contravention of this temperature limit
or the placing of adjacent cabinet materials closer than 4mm to the
appliance, will be at the liability of the owner.
For use in Leisure Accommodation Vehicles, notice must be taken
of the appropriate statement in the Installation Instructions.
The foregoing does not affect your statutory rights.
Any repairs or servicing must be carried out exclusively by a qualified
technician.
Never expose the oven to atmospheric agents.
1
Before using this appliance ensure that any protective packaging or
coatings have been removed. To aid the protection of the
environment, please sort the packing materials into different types
and dispose of them in accordance with the local waste disposal
laws.
Any further information on waste disposal can be obtained from
your local Environmental Agency office.
When first used, an odour may be emitted by any residual
protective finish or moisture, which will cease after a short period
of time.
This Appliance has been Constructed and Distributed in
compliance with the essential requirements of the following EEC
Directives, European Norms and Australian Standards:
CE Marking – 93/68 Low Voltage – 73/23 EMC – 89/336
Safety Standards – EN 60 335-1, EN 60 335 – 2 – 6
ASNZS 3350-1 , ASNZS 3350-2-6
As the firm hasa policy of continued product improvement,
the right is reserved to adjust and make any modifications deemed
necessary without notification.
Keep children away from the packing materials and do not let them
play with it.
2
IMPORTANT NOTE –
WARNING AND SAFETY INSTRUCTIONS
This appliance complies with all current European safety
legislation, however the firm do wish to emphasise that
compliance does not remove the fact that the appliance surfaces
will become hot during use and retain heat after operation.
The firm advise that this appliance is not intended for use by young
children or infirm persons unless they have been adequately supervised
bya responsible person to ensure that they can use the appliance
safely. Young children should be supervised to ensure they do not
play with the appliance. If it is necessary for younger family
members to be in the kitchen, please ensure that they are kept under
close supervision at all times. During use, the appliance becomes hot.
Care should be taken to avoid touching heating elements inside the oven.
Do not place heavy objects on or lean on the oven door when open
as this can cause damage to the hinges.
Do not leave heated oil or fat unattended as there is a risk of fire.
Do not place pans or baking trays on the bottom of oven cavities or
line any part of the oven cavity with aluminium foil.
Do not allow electrical fittings or cables to be in contact with hot
areas of the appliance.
Do not use the appliance for space heating or to dry clothes.
Do not install the appliance next to curtains or soft furnishings.
Do not attempt to lift or move cooking appliances by pulling on any
door or handle as this can cause damage.
Always use oven gloves when moving food in or out of the oven cavity.
Warning: this appliance must be earthed.
Do not pour water directly into the inside of a hot oven:
the enamel coating could be damaged.
Before any cleaning operation inside the oven, wait until it has cooled
down.
Do not use a steam cleaner with this appliance.
WARNING: accessible parts will become hot when in use.
To avoid burns and scalds children should be kept away.
3
NOTE: This appliance must be correctly installed by a suitably
qualified person, strictly in accordance with the manufacturer’s
instructions.
For electrical installations, NICEIC registration is recommended.
The firm declines any responsibility for injury or damage
to persons or property as a result of improper use or installation
of this appliance.
Heat, steam and moisture will be created during use, take care
to avoid injury and ensure that the room is adequately
ventilated. If prolonged use occurs, additional ventilation may
be required – please consult your Qualified Installer if you are
in any doubt about the amount required.
Thecooling fan is in place to assist in the overall cooling of the
appliance, and reduce the cool down period after use.
The fan operation will continue to run for a short period after
the end of the cooking operation.
4
INSTALLATION INSTRUCTIONS
This appliance must be correctly installed by a suitable qualified
person strictly in accordance with the manufacturer's instructions.
The manufacturer's declines any responsibility for injury or damage
to persons or property as a result of improper installation of this appliance.
The housing, adjacent furniture and all materials used in installation
must be able to withstand a minimum temperature of 85°C plus ambient
during periods of operation. In addition, adjacent furniture cabinet
doors must be at least 4 mm from the appliance at all points. Certain
types of vinyl or laminate kitchen furniture cabinetry are particularly
prone to heat damage and discoloration. Any delamination or disco-
louration of materials which occurs below 85°C plus ambient or where
materials are less than 4 mm from the appliance will be the liability
of the owner.
This appliance is designed for building-in to a standard 600 mm wide
oven housing.
The housing into which the appliance is installed must incorporate a full
depth shell positioned 50 mm below the support shelf for the appliance.
For building-in to a tall housing, the installation dimensions are as
follows on the next page.
Important:
When placing the oven in the housing, do not use the oven door as a lever
for lifting the oven as damage may result.
Lift the oven using the purpose designed metal handles on the sides and
slide it into the housing unit.
Align the oven centrally in the housing unit before securing it.
Once the oven has been positioned in the housing it should be secured
in placeat the four corners of the oven door frame using suitable screws.
5
INSTALLATION
6
ELECTRICAL REQUIREMENTS
WARNING: THIS APPLIANCE MUST BE EARTHED
Electrical installation must comply with all relevant local and
national regulations. Make sure that the voltage supply is the same
as the rating given on the data plate positioned on the lower part
of the front of the oven.
This appliance must be connected to an a.c. single phase 240 V -
50Hz electricity supply.
Fit an all-pole On/Off switch between the appliance and the power
supply with minimum contact separation of 3 mm. The switch
must be of easy access once the appliance is in place for main-
tenance and service purposes.
This appliance is supplied without a connection cable. A suitable
cable which complies with all local and national regulations must
be used, and to be in accordance with the details shown on page 21.
The connection clamp for the cable is at the rear of the appliance.
Unscrew and remove the cover, then insert the cable by way of
the cable clip and connect according to the drawing on next page.
The earth wire of the power supply cable must be longer than the
positive and negative conductors. Tighten the cable clip screws
and close the cover.
Maintenance and servicing work must only be carried out after
the power supply has been disconnected, either by switching off
at the wall socket or disconnecting at the main fuse box.
7
8
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Horno de D’amani
