Cytron Technologies CT-UNO Manual de usuario

ROBOT . HEAD to TOE

Product User’s Manual – CT-UNO

CT-UNO

CT UNO (Arduino Uno Compatible)

User's Manual

V1.0

Nov 2014

 
ROBOT . HEAD to TOE 
                                                                  Product User’s Manual – CT-UNO
 
INDEX 
 
1. Introduction 3 
 
2. Packing List 4 
 
3. Product Specification 5 
 
4. Dimension 6 
 
5. Board Layout  7 
 
6. Hardware Installation 9 
 
7. Getting Started 13 
 
8. Warranty 15 
 
Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved  2

ROBOT . HEAD to TOE

Product User’s Manual – CT-UNO



1. INTRODUCTION

CT-UNO is a Cytron version of Arduino Uno. This board combines the simplicity of the

UNO’s Optiboot bootloader (which load program faster), the stability of the FTDI and the R3

shield compatibility of the latest Arduino UNO R3.

CT-UNO has all the amazing features Arduino UNO offer. 14 Digital I/O pins with 6 PWM

pins, 6 Analog inputs, UART, SPI, external interrupts, not to forget the I2C too. The SDA,

SCL and IOREF pins which being broken out on UNO R3 are on CT-UNO too. We has also

populated the ISP header pins (SPI and power). With this, CT-UNO will be compatible with

all Arduino UNO's shield.

CT-UNO comes with following features:

●SMD ATmega328 microcontroller with Optiboot (UNO) Bootloader.

●USB Programming Facilitated by the Ubiquitous FTDI FT231X (more stable).

●Input voltage: DC7-15V.

●On board 1A (maximum) 5V voltage regulator.

●On board 500mA (maximum) 3.3V voltage regulator.

●0-5V digital outputs with 3.3V compatible inputs.

●14 Digital I/O Pins (6 PWM outputs).

●6 Analog Inputs (Can be digital I/O too).

●ISP 6-pin Header.

●32k Flash Memory.

●16MHz Clock Speed.

●R3 Shield Compatible.

●TX, RX, Power, pin 13 LEDs are moved to edge.

●Utilize USB Micro-B socket.

●White PCB!

ROBOT . HEAD to TOE

Product User’s Manual – CT-UNO



2. PACKING LIST

Please check the parts and components according to the packing list. If there are any parts

missing, please contact us at [email protected] immediately.

CT-UNO comes with:

●1 x CT-UNO board.

Optional add-on:

●12V 2A AC to DC Adapter

●USB Micro B cable

ROBOT . HEAD to TOE

Product User’s Manual – CT-UNO



3. PRODUCT SPECIFICATION

CT-UNO is designed to offer starting up platform for development. The specification of

ATmega328p used should be referred.

Absolute Maximum Rating

Parameter

Min

Max

Unit

Input Voltage via Adapter (Recommended)

Input Voltage via Adapter (Limits)

IMAX (5V) (from on-board 5V Voltage regulator)*

IMAX (3.3V) (from on-board 3.3V Voltage regulator)

500

* With Vin at 12V

ROBOT . HEAD to TOE

Product User’s Manual – CT-UNO



4. DIMENSION

ROBOT . HEAD to TOE

Product User’s Manual – CT-UNO



5. BOARD LAYOUT

LABEL

DESCRIPTION

Reset Button

Micro USB B Type Connector (Female)

RX LED Indicator (Serial)

TX LED Indicator (Serial)

Programmable LED

Power LED Indicator

Adapter Socket (2.1mm)

Extra Pads

Arduino R3 Standard Header

ISP Header Pin

ROBOT . HEAD to TOE

Product User’s Manual – CT-UNO

Reset Button

Reset button can be used to reset/restart the CT-UNO program.

Micro USB B Type Connector (Female)

This connector is for USB connection to upload program or power up via USB cable. A USB

micro-B type cable is needed.

RX LED Indicator (Serial)

RX LED lights up when there have data transfer from USB to ATmega328.

TX LED Indicator (Serial)

TX LED lights up when there have data transfer from ATmega328 to USB.

Programmable LED

Programmable LED is active HIGH and it is connected to pin 13.

Power LED Indicator

Power LED will light ON once the board is powered.

Adapter Socket (2.1mm)

DC power adaptor socket for user to plug in DC adapter. The input voltage should be ranged

from 7 to 15V.

Extra Pads

This extra pad allow CT-UNO to be stacked on strip/donut board.

Arduino R3 Standard Header

CT-UNO can be stacked with Arduino shield.

ISP Header Pin

User can upload Arduino Uno bootloader firmware using AVR programmer (e.g. AVR

USBasp) through this pin.

ROBOT . HEAD to TOE

Product User’s Manual – CT-UNO



6. HARDWARE INSTALLATION

6.1 CT-UNO power supply

CT-UNO power source is either from 12V power adapter (via DC jack) or USB cable. If

CT-UNO is powered using both supply (12V adapter and USB cable) it will automatically

choose power from adapter.

●CT-UNO is being powered using adapter.

●CT-UNO is being powered using USB cable.

ROBOT . HEAD to TOE

Product User’s Manual – CT-UNO

●If CT-UNO is powered with both 12V Power adapter and USB cable, it will

automatically choose power from power adapter.

6.2 Downloading bootloader firmware

CT-UNO provide ISP for user uploading Arduino Uno bootloader firmware. User can use

AVR programmer (e.g. AVR USBasp) to upload firmware to ATmega328p.

Tabla de contenidos

Otros manuales de Placa madre de Cytron Technologies

Cytron Technologies

Cytron Technologies UIC00A Manual de usuario

Cytron Technologies

Cytron Technologies UIC00B Manual de usuario

Cytron Technologies

Cytron Technologies SHIELD-MD10 Manual de usuario

Cytron Technologies

Cytron Technologies Maker Uno Manual de usuario

Cytron Technologies

Cytron Technologies CuteDuino Manual de usuario

Cytron Technologies

Cytron Technologies EasyMP3 Shield Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario