Cytiva F9-R Manual de usuario

Install

Fraction collector F9-R

Instructions

Scope

Instructions on how to install one, or for ÄKTA™ pure two, optional Fraction collector

F9-R (29011362) modules.

Description

Introduction

Fraction collector F9-R collects fractions from ÄKTA avant and ÄKTA pure purification

runs.

Fraction collector F9-R can be used for:

•Time or volume based fractionation

•Peak fractionation

•Combined time or volume based fractionation and peak fractionation

It is possible to install up to two Fraction collector F9-R modules when using ÄKTA pure.

ÄKTA avant has a built-in fraction collector, and it is possible to install one Fraction

collector F9-R as an extra module.

Note: If two fraction collectors are to be used, the second one must be configured as

Fraction collector F9-R 2nd, independent of the first fraction collector type.

cytiva.com 29021462 AD

Location

ÄKTA pure

The illustration below shows Fraction collector F9-R together with ÄKTA pure. It is

recommended to place Fraction collector F9-R on the left side of the instrument.

Fraction collector F9-R can also be placed on a shelf located beneath the system.

ÄKTA avant

In ÄKTA avant it is recommended to place Fraction collector F9-R on the right side of the

instrument.

2 ÄKTA avant and ÄKTA pure Instructions 29021462 AD

Note: Consider the tubing going to Fraction collector F9-R if ÄKTA avant is turned

on its swivel foot.

ÄKTA avant and ÄKTA pure Instructions 29021462 AD 3

Illustration of Fraction collector F9-R

Part Function

1 Lock knob

2 Stationary part of delivery arm

3 Delivery arm

4 Tubing connector

5 Tube sensor

6 Collection tubes

7 Tube rack

8 Base unit

4 ÄKTA avant and ÄKTA pure Instructions 29021462 AD

Unpacking

Follow the instruction below to unpack the Fraction collector and to remove the

transport fixations.

Step Action

1Open the transportation box.

2Lift off the piece of foam and check the content according to the supplied

package list.

ÄKTA avant and ÄKTA pure Instructions 29021462 AD 5

Step Action

3Lift out Fraction collector F9-R by the Base unit and place it on the bench.

NOTICE

Never lift Fraction collector F9-R by the Delivery arm.

This may damage the Fraction collector.

4Remove the plastic bag.

6 ÄKTA avant and ÄKTA pure Instructions 29021462 AD

Step Action

5Lift the Delivery arm and gently move the Delivery arm to the outer stop.

6Remove the piece of foam from under the Tube rack.

Installation

For information on how to assemble Fraction collector F9-R, please refer to the

respective instrument User manual and Fraction collector F9-C and F9-R Operating

instructions.

ÄKTA avant and ÄKTA pure Instructions 29021462 AD 7

Illustration of Fraction collector F9-R

connector panel

Part Function

1 Node ID switch

2UniNet-9 communication and power supply

Connect the Fraction collector

Connect the UniNet cable between any of the UniNet-9 ports on the back of the

instrument and on the back of the Fraction collector F9-R or Fraction collector F9-R, 2nd.

Make sure that all unused UniNet-9 ports on the instrument are plugged.

Node ID

Node ID is a unit number designation that is used by the instrument to distinguish

between several units of the same type. All standard valves and available optional

modules are pre-configured to give the desired function. However, the function of a valve

or module can be changed by changing the Node ID.

Also, in a troubleshooting situation it may be useful to check the Node ID of the

respective valve or module.

Note: The function of a valve or module is defined by a combination of the module

type and its Node ID, not by its physical position.

Check/change Node ID

The Node ID is set by positioning the arrow of the rotating switch at the back of the

Fraction collector. Use a screwdriver to set the arrow of the switch to the desired

number.

8 ÄKTA avant and ÄKTA pure Instructions 29021462 AD

Step Action

1Set Node ID to 0 for Fraction collector F9-R and to 1 for Fraction collector F9-

R, 2nd.

2Connect Fraction collector F9-R and/or Fraction collector F9-R, 2nd to the

instrument.

ÄKTA avant and ÄKTA pure Instructions 29021462 AD 9

Software configuration

When a Fraction collector has been installed, the System Properties for the system

must be updated in UNICORN™. The system will restart automatically when the

configuration has been changed and the system can be reconnected.

Follow the instructions below to update the system in UNICORN.

Step Action

1•On the Tools menu in the Administration module, click System

Properties or click the System Properties icon to open the dialog.

Result:

The System Properties dialog is displayed.

•Select the system of interest in the System Properties dialog.

•Click Edit.

Note:

Only active systems can be edited.

Result:

The Edit dialog is displayed.

The ÄKTA pure dialog is shown in the example below.

10 ÄKTA avant and ÄKTA pure Instructions 29021462 AD

Otros manuales para F9-R

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de laboratorio de cytiva

cytiva

cytiva OligoPilot 400 Manual de usuario

cytiva

cytiva F9-C Manual de usuario

cytiva

cytiva FineLINE 35 Manual de usuario

cytiva

cytiva AKTA readyflux Manual de usuario

cytiva

cytiva Amersham ERASER Manual de usuario

cytiva

cytiva ReadyToProcess 600 Manual de usuario

cytiva

cytiva Amersham ImageQuant 800 Manual de usuario

cytiva

cytiva FineLINE Pilot 35 column Manual de usuario

cytiva

cytiva AKTA pilot 600 Manual de usuario

cytiva

cytiva Oligo Column Manual de usuario

cytiva

cytiva Xuri W25 Manual de usuario

cytiva

cytiva AKTA ready Manual de usuario

cytiva

cytiva ReadyToProcess STF - Dry Manual de usuario

cytiva

cytiva AKTA readyflux Manual de usuario

cytiva

cytiva 420100 Manual de usuario

cytiva

cytiva UV-900 Manual de usuario

cytiva

cytiva Sterile Tube Fuser Manual de usuario

cytiva

cytiva ReadyToProcess Mixer 20/50 Manual de usuario

cytiva

cytiva Ettan IPGphor Cup Loading Manifold Manual de usuario

cytiva

cytiva Frac30 Manual de usuario

cytiva

cytiva AxiChrom Manual de usuario

cytiva

cytiva Amersham ImageQuant 500 Manual de usuario

cytiva

cytiva AKTA avant Manual de usuario

cytiva

cytiva VIA Thaw L1000 Manual de usuario

Manuales populares de Equipo de laboratorio de otras marcas

Qiagen

Qiagen DML 3000 Manual de usuario

Queensgate

Queensgate NANOSCAN OP400 Manual de programación

Conviron

Conviron GEN1000-GE Manual de usuario

Parr Instrument

Parr Instrument 4560 Manual de instrucciones

IKA

IKA IC control Manual de usuario

Integra

Integra DOSE IT Manual de usuario

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manual de usuario

NI PXI-5422 Manual

Collomix

Collomix Aqix Manual de usuario

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario

Ocean Insight

Ocean Insight FLAME-NIR+ Manual de usuario

Parker

Parker ALIGN-MG-NA Manual de usuario

BD 644787 Manual de usuario

DENTAURUM

DENTAURUM Compact Megaplus Manual de usuario

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manual de usuario

VWR

VWR SAS Super IAQ Manual de usuario

illumina

illumina MiSeqDx Manual de usuario

cytiva F9-R Manual de usuario

Manuales populares de Equipo de laboratorio de otras marcas