Cypress DCT-9 Manual de usuario
DCT-9
Universal Digital/
Analog Audio
Converter
Operation Manual
DCT-9
Disclaimers
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes
no commitment to update or to keep current the information
contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright Notice
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
Cypress Technology.
© Copyright 2009 by Cypress Technology.
All Rights Reserved.
Version 1.0 July 2009
Trademark Acknowledgments
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
Safety Precautions
Please read all instructions carefully before installing or operating
this product.
Always follow basic safety precautions to reduce the risk of
fire, electrical shocks and injuries.
To prevent fires or shocks do not expose this product to rain,
moisture or install it near water.
Never spill liquid of any kind on or into this product.
Never push an object into this device through any openings or
empty slots, as this may damage parts.
Do not attach the power supply to building surfaces.
Do not allow anything to rest on the power cables or put it in a
place where it might be stepped on .
To protect the equipment from overheating, do not block the
slots and openings in the casing that provide ventilation.
Revision History
Revision History
Version No Date Summary of Change
V1 20090713 Preliminary Release
VR2 20110119 Audio Specication
VR3 20110802 Intro w/o Model No.
VR4 20111110 Update Format
Table of Contents
1
1
1
1
1
2
2
3
4
4
4
5
5
6
1. Introduction…………………………………………………........……….
2. Applications……………………..…………………………................….
3. Package Contents…………………………......…………….............…
4. System Requirements......……………………..….…………........…….
5. Features…………………………………………….......……........………
6. Specications..………………………………………...........………...….
6.1 Input Audio Reference Level......................................................
6.2 Input Audio with Output Audio Comparison Chart.................
7. Operation Controls and Functions………………...……........…….…
7.1 Top Panel .................................................................................
7.2 Right Panel ………………………………………….........…….…
7.3 Left Panel .................................................................................
7.4 Back Panel ……………………………..………….........……...…
8. Connection and Installation …….…………………..........…..…..…...
1. Introduction
The Universal Digital/Analog Audio Converter is a gadget that can convert
Optical, Coaxial and L/R audio signals. With the ability of audio formates
conversion, this gadget can either convert digital audio into analog L/R audio
or convert analog L/R audio into digital audio
. If you find yourself
limited by
multiple audio formats, why not consider the Universal Digital/Analog
Audio
Converter and find out what pure audio sounds like.
2. Applications
Analog audio to digital audio signal conversion
Digital audio to analog audio signal conversion
Simultaneously digital and analog audio output
Digital coaxial to Toslink and Toslink to coaxial conversion
3. Package Contents
Universal Digital / Analog Audio Converter
Power Adaptor
User Manual
4. System Requirements
Input audio source(s) equipments with connection cable(s) and output signal
with connection cables.
5. Features
Integrated digital interpolator filter and Digital-to-Analog Converter (DAC)
Integrated Analog –to-Digital Converter (ADC)
Supports sampling frequencies from 16 to 100kHz
Provides electromagnetic-noise-free transmission
Easy to install and operate
Compact and elegant design
1
Input Ports Optical, Coaxial and L/R
Input Format Toslink, SPIDIF and LPCM 2CH
Sample Frequency 32kHz, 44.1kHz, 48kHz and 96kHz
Output Ports Coaxial, Optical and L/R
L/R Input Impedance 47KΩ
L/R Output Impedance 47KΩ
ESD Protection Human body model: ±10kV (air-gap discharge)
±6kV (contact discharge)
Power Supply 5V / 1A DC (US/EU standard, CE/FCC/UL certified)
Dimensions(mm) 97(W) x 85(D) x 35(H)
Weight(g) 120
Chassis Material Plastic
Silkscreen Color White
Operating Temperature 0ºC~40ºC / 32ºF~104ºF
Storage Temperature -20ºC~60ºC / -4ºF~140ºF
Power Consumption 1W
Relative Humidity 20~90% RH (non-condensing)
6.1 Input Audio Reference Level
Input L/R
Level/Freq Output Output
Level
Output
T.H.D+N
Signal to
Noise Ratio
L/R
2Vrms
1KHz
L/R 1Vrms±0.05 0.01%↓>90dB
COAX 0 dB~-0.35dB 0.01%↓>90dB
OPTICAL 0 dB~-0.35dB 0.01%↓>90dB
Input COAX
Level/Freq Output Output
Level
Output
T.H.D+N
Signal to
Noise Ratio
COAX
OdBFS
1KHz
L/R 1Vrms±0.05 0.01%↓>90dB
COAX 0 dB±0.05 0.01%↓>90dB
OPTICAL 0 dB±0.05 0.01%↓>90dB
6. Specications
2
Input Ports Optical, Coaxial and L/R
Input Format Toslink, SPIDIF and LPCM 2CH
Sample Frequency 32kHz, 44.1kHz, 48kHz and 96kHz
Output Ports Coaxial, Optical and L/R
L/R Input Impedance 47KΩ
L/R Output Impedance 47KΩ
ESD Protection Human body model: ±10kV (air-gap discharge)
±6kV (contact discharge)
Power Supply 5V / 1A DC (US/EU standard, CE/FCC/UL certified)
Dimensions(mm) 97(W) x 85(D) x 35(H)
Weight(g) 120
Chassis Material Plastic
Silkscreen Color White
Operating Temperature 0ºC~40ºC / 32ºF~104ºF
Storage Temperature -20ºC~60ºC / -4ºF~140ºF
Power Consumption 1W
Relative Humidity 20~90% RH (non-condensing)
6.1 Input Audio Reference Level
Input L/R
Level/Freq Output Output
Level
Output
T.H.D+N
Signal to
Noise Ratio
L/R
2Vrms
1KHz
L/R 1Vrms±0.05 0.01%↓>90dB
COAX 0 dB~-0.35dB 0.01%↓>90dB
OPTICAL 0 dB~-0.35dB 0.01%↓>90dB
Input COAX
Level/Freq Output Output
Level
Output
T.H.D+N
Signal to
Noise Ratio
COAX
OdBFS
1KHz
L/R 1Vrms±0.05 0.01%↓>90dB
COAX 0 dB±0.05 0.01%↓>90dB
OPTICAL 0 dB±0.05 0.01%↓>90dB
Input OPTICAL
Level/Freq Output Output
Level
Output
T.H.D+N
Signal to
Noise Ratio
OPTICAL
OdBFS
1KHz
L/R 1Vrms±0.05 0.01%↓>90dB
COAX 0 dB±0.05 0.01%↓>90dB
OPTICAL 0 dB±0.05 0.01%↓>90dB
6.2 Input Audio with Output Audio Comparison Chart
Audio Input
Source Output Output
Format Remark
Stereo L/R
L/R Analog 2CH
COAX LPCM2CH(48KHz)
OPTICAL LPCM2CH(48KHz)
OPTICAL
L/R Support LPCM 2CH only
Odd sound
may appear
ln AC3/DTS
COAX LPCM 2CH/AC3/DTS Bypass
OPTICAL LPCM 2CH/AC3/DTS Bypass
COAX
L/R Support LPCM 2CH only
Odd sound
may appear
ln AC3/DTS
COAX LPCM 2CH/AC3/DTS Bypass
OPTICAL LPCM 2CH/AC3/DTS Bypass
3
①When the device is turned on the LED is green, and when turned off the
devices LED is red.
②Input Analog 2CH LED indicator: When selecting L/R input, the blue LED
will turn on.
③Input Coax LED indicator: When selecting Coaxial input, the blue
LED will switch on.
④Input Optical LED indicator: When selecting Optical input, the blue LED
will turn on.
7. Operation Controls and Functions
7.1 Top Panel
7.2 Right Panel
1 2 3
POWER L/R COAX OPTICAL
UNIVERSAL
DIGITAL / ANALOG
AUDIO CONVERTER
4
①OPTICAL: The audio sources optical cable connects here.
②COAX: Connect audio sources Coaxial cable in this socket.
③L/R: This is where you insert the audio sources L/R cable.
1 2 3
4
7.3 Left Panel
①L/R: Connect to a compatible audio device, such as a TV or amplifier
with an L/R audio cable.
②COAX: Connect to an audio sources (TV or amplifier) coaxial input.
③OPTICAL: This is used to connect with a TV or amplifiers optical jack.
2 3
1
7.4 Back Panel
①DC 5V Power Jack: Plug the 5V 1A DC power supply into the unit and
connect the adaptor to an AC wall outlet.
②INPUT SELECT: Use this switch to select the current audio source, either
optical, coaxial or L/R.
③Power Switch: Push the button to turn on or switch off the device.
1 2 3
5
8. Connection and Installation
TV
Optical
or
or
or
Amplifier
Blue Ray
DVD
Set-top-Box
L/R
Coaxial
Coaxial
Optical L/R
6
Otros manuales para DCT-9
1
Tabla de contenidos
Otros manuales de Convertidor de medios de Cypress
Cypress
Cypress CSY-2100 Manual de usuario
Cypress
Cypress S6J3110 Series Instrucciones de funcionamiento
Cypress
Cypress CV-400H Manual de usuario
Cypress
Cypress DCT-9D Manual de usuario
Cypress
Cypress CMDPH-2C Manual de instalación
Cypress
Cypress PCHD-DVI-SCALER Manual de usuario
Cypress
Cypress CVSD-3A Manual de usuario
Cypress
Cypress CP-280H Manual de usuario
Cypress
Cypress CLUX-H2SDI Manual de usuario
Cypress
Cypress CLUX-14CEC Manual de usuario
Cypress
Cypress DataBender CVX-1300 Manual de usuario
Cypress
Cypress CP-300VD Manual de usuario
Cypress
Cypress CVX-OPTW Manual de usuario
Cypress
Cypress CCR-2SRGB Manual de usuario
Cypress
Cypress CHQV-2H Manual de usuario
Cypress
Cypress DataBender CVX-1300 Manual de usuario
Cypress
Cypress CVLUX-1080P Manual de usuario
Cypress
Cypress DCT-9 Manual de usuario
Cypress
Cypress CP-268S Manual de usuario
Cypress
Cypress CP-264 Manual de usuario
