Cypress CDM-600 Manual de usuario
PAL to NTSC (NTSC to PAL)
Video Converter
Convertor (CDM-600)
Operation Manual
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone +61 249689313 Fax +61 249689314
www.converters.tv
Introduction
This unit is a digital multi-system video converter that converts video signals from
NTSC, PAL, or SECAM to NTSC or PAL. It is suitable for home applications.
Precaution
1. Do not expose this product to direct sunlight.
2. Keep the unit away from radiator, heat sources and magnetic field.
3. Do not place it in very dusty or humid locations.
4. Use this unit in a horizontal position only.
5. Do not put heavy objects on top of the converter.
6. Put the unit in an open space that has good ventilation.
7. If the unit is acting abnormally keep the unit away from TV or other electronic
equipment.
8. Unplug the unit from the power supply when it is not to be used for a long period
of time.
Feature
•Full digital processing: 2M bit field memory.
•Automatic input system detection.
•Stylish, compact package, excellent for portable application.
•Digital conversion from input TV signals NTSC, PAL or SECAM to output
signals NTSC or PAL.
•Built in Time Base Corrector (TBC) for signal synchronization.
•Built in Automatic Gain Control (AGC) function ensures 1 Vp-p output signal.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone +61 249689313 Fax +61 249689314
www.converters.tv
Operation control and function
Front Panel
1. AUTO indicator- This indicator will light when in Auto detecting mode.
2. PAL indicator- This indicator will light when input signal is PAL.
3. SECAM indicator- This indicator will light when input signal is SECAM.
4. NTSC 3.58 indicator- This indicator will light when input signal is N3.
5. NTSC 4.43 indicator-This indicator will light when input signal is N4.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone +61 249689313 Fax +61 249689314
www.converters.tv
Rear Panel
1. DC Power upply 15 V input- This is the power supply input port. It is to be
used with the power pack supplied.
2. Video Input- This is the video input port. Connect your input device to the video
input port using a composite RCA connector cable.
3. Input ignal detecting mode witch- Auto represents automatic detecting mode.
M represents manual-detecting mode.
4. Input y tem elect witch- hen in M-mode, set the switch to match the actual
input signal type. (PAL, SECAM, NTSC 3.58, NTSC 4.43).
5. Video output- This is the video output port. Connect your output device to the
video output port using a composite RCA connector cable.
6. Output y tem elect witch- Set the switch to the type of signal you wish to
output. You may select either PAL or NTSC.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone +61 249689313 Fax +61 249689314
www.converters.tv
Connection and In tallation
The AC adaptor power unit should not be plugged into a wall outlet until all connections
are complete.
- Using your connector cable connect the output (Number 5 on the rear panel) to your
output device (NTSC or PAL Video Recorder or TV).
- Using your connector cable connect your input (Number 2 on the rear panel) to the
input device (Video cassette recorder either- PAL, NTSC or SECAM, satellite
receiver or a camcorder).
- Choose either Auto or Manual as your input detecting mode switch. hen in M-mode
(manual), set the switch to match the actual input signal type. (PAL, SECAM, NTSC
3.58, NTSC 4.43).
Once all connections are complete please connect the power supply provided to the
power socket (number 7 on rear panel).
Specification
Input TV y tem NTSC 3.58, NTSC 4.43, PAL, SECAM
Output TV y tem NTSC 3.58, PAL (B, D, G, I)
Connection terminal Video Input: 1
Video Output: 1
Sampling frequency Y: 14.318 MHz
R-Y: 7.159 MHz
B-R: 7.159 MHz
Digital Cord Bit Y: 8 bits
R-Y: 8 bits
B-R: 8 bits
Line Conver ion 525-625 lines
Field Conver ion 60-50 fields
Power Supply DC 15 Volts 450 mA
Dimen ion ( ) 236 mm X (D) 130 mm (H) X 45 mm
Weight 600g
Acce ory One set of video/cable, AC adaptor
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone +61 249689313 Fax +61 249689314
www.converters.tv
Tabla de contenidos
Otros manuales de Convertidor de medios de Cypress
Cypress
Cypress CP-251F Manual de usuario
Cypress
Cypress CP-RGBVS Manual de usuario
Cypress
Cypress DataBender CVX-1300 Manual de usuario
Cypress
Cypress CVMDP-1080P Manual de usuario
Cypress
Cypress CP-298D Manual de usuario
Cypress
Cypress CLUX-H2SDI Manual de usuario
Cypress
Cypress CM-398H Manual de usuario
Cypress
Cypress OSM-1000-BRD Manual de usuario
Cypress
Cypress OSM-1000-BRD Manual de usuario
Cypress
Cypress CMDPH-2C Manual de instalación
Cypress
Cypress CLUX-SDI2CSS Manual de usuario
Cypress
Cypress PCHD-DVI-SCALER Manual de usuario
Cypress
Cypress ADC-660 Manual de usuario
Cypress
Cypress CHQV-2H Manual de usuario
Cypress
Cypress CDL-125 Manual de usuario
Cypress
Cypress CM-1392M Manual de usuario
Cypress
Cypress CH-501TX Manual de usuario
Cypress
Cypress CP-280H Manual de usuario
Cypress
Cypress CVLUX-1080P Manual de usuario
Cypress
Cypress CM-398H Manual de usuario
