Cypress Semiconductor MB95330 Series Manual de usuario

Cypress Semiconductor

198 Champion Court

San Jose, CA 95134-1709

Phone (USA): 800.858.1810

Phone (Intnl): +1.408.943.2600

www.cypress.com

F2MC-8FX Family

8-bit Microcontroller

MB95330 Series EV Board

MB2146-440-E Setup Guide

Doc. # 002-07604 Rev. *A

Copyrights

MB95330 Series EV Board MB2146-440-E Setup Guide, Doc. # 002-07604 Rev. *A 2

Copyrights

and its subsidiaries, including Spansion LLC ("Cypress"). This document, including any software or firmware included or refer-

enced in this document ("Software"), is owned by Cypress under the intellectual property laws and treaties of the United

States and other countries worldwide. Cypress reserves all rights under such laws and treaties and does not, except as spe-

cifically stated in this paragraph, grant any license under its patents, copyrights, trademarks, or other intellectual property

rights. If the Software is not accompanied by a license agreement and you do not otherwise have a written agreement with

Cypress governing the use of the Software, then Cypress hereby grants you a personal, non-exclusive, nontransferable

license (without the right to sublicense) (1) under its copyright rights in the Software (a) for Software provided in source code

form, to modify and reproduce the Software solely for use with Cypress hardware products, only internally within your organi-

zation, and (b) to distribute the Software in binary code form externally to end users (either directly or indirectly through resell-

ers and distributors), solely for use on Cypress hardware product units, and (2) under those claims of Cypress's patents that

are infringed by the Software (as provided by Cypress, unmodified) to make, use, distribute, and import the Software solely

for use with Cypress hardware products. Any other use, reproduction, modification, translation, or compilation of the Software

is prohibited.

TO THE EXTENT PERMITTED BY APPLICABLE LAW, CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, WITH REGARD TO THIS DOCUMENT OR ANY SOFTWARE OR ACCOMPANYING HARDWARE, INCLUDING,

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR-

POSE. To the extent permitted by applicable law, Cypress reserves the right to make changes to this document without fur-

ther notice. Cypress does not assume any liability arising out of the application or use of any product or circuit described in

this document. Any information provided in this document, including any sample design information or programming code, is

provided only for reference purposes. It is the responsibility of the user of this document to properly design, program, and test

the functionality and safety of any application made of this information and any resulting product. Cypress products are not

designed, intended, or authorized for use as critical components in systems designed or intended for the operation of weap-

ons, weapons systems, nuclear installations, life-support devices or systems, other medical devices or systems (including

resuscitation equipment and surgical implants), pollution control or hazardous substances management, or other uses where

the failure of the device or system could cause personal injury, death, or property damage ("Unintended Uses"). A critical

component is any component of a device or system whose failure to perform can be reasonably expected to cause the failure

of the device or system, or to affect its safety or effectiveness. Cypress is not liable, in whole or in part, and you shall and

hereby do release Cypress from any claim, damage, or other liability arising from or related to all Unintended Uses of Cypress

products. You shall indemnify and hold Cypress harmless from and against all claims, costs, damages, and other liabilities,

including claims for personal injury or death, arising from or related to any Unintended Uses of Cypress products.

Cypress, the Cypress logo, Spansion, the Spansion logo, and combinations thereof, PSoC, CapSense, EZ-USB, F-RAM, and

Traveo are trademarks or registered trademarks of Cypress in the United States and other countries. For a more complete list

of Cypress trademarks, visit cypress.com. Other names and brands may be claimed as property of their respective owners.

MB95330 Series EV Board MB2146-440-E Setup Guide, Doc. # 002-07604 Rev. *A 3

Preface

Thank you for purchasing the 8FX Family All Series BGM adapter (model number: MB2146-07-E).

The product is a development support tool for developing and evaluating applied products which use

Cypress microcontrollers (hereafter MCU) that have a BDSU module. This manual describes how to

handle the New 8FX Family All Series BGM adapter. Be sure to read it before using the product.

For information on the MCU supported by this product, contact the sales or support representative.

Note: This product does not correspond to the MB95200H/210H/220H series of the New 8FX family.

Please use MB2146-08-E for the MB95200H/210H/220H series.

■Using the product safely

This manual contains important information required for using the product safely. Be sure to read

through the manual before using the product and follow the instructions contained therein to use it

correctly.

In particular, carefully read “■Caution of the products described in this manual” at the beginning of

this manual to understand the requirements for safe use of the product before using it.

After reading the manual, keep it handy for future reference.

■TRADEMARK

■REALOS, SOFTUNE are trademarks of Cypress Semiconductor Limited, Japan.

■Related manuals

You should refer to the following manuals as well:

❐“HARDWARE MANUAL” for each type of MCU

❐“DATA SHEET” for each type of MCU

❐“SOFTUNE Workbench OPERATION MANUAL”

❐“SOFTUNE Workbench USER’S MANUAL”

❐“SOFTUNE Workbench COMMAND REFERENCE MANUAL”

■European RoHS compliance

Products with an -E suffix on the part number are European RoHS compliant products.

■Notice on this document

All information included in this document is current as of the date it is issued. Such information is

subject to change without any prior notice.

Please confirm the latest relevant information with the sales representatives.

MB95330 Series EV Board MB2146-440-E Setup Guide, Doc. # 002-07604 Rev. *A 4

■Caution of the products described in this document

The following precautions apply to the product described in this manual.

WARNING

Indicates a potentially hazardous situation which could result in death or

serious injury and/or a fault in the user’s system if the product is not used

correctly.

Electric shock,

Damage

Before performing any operation described in this manual, turn off all the

power supplies to the system.

Performing such an operation with the power on may cause an electric

shock or device fault.

Electric shock,

Damage

Once the product has been turned on, do not touch any metal part of it.

Doing so may cause an electric shock or device fault.

CAUTION

Indicates the presence of a hazard that may cause a minor or moderate

injury, damages to this product or devices connected to it, or may cause

to loose software resources and other properties such as data, if the de-

vice is not used appropriately.

Cuts, Damage

Before moving the product, be sure to turn off all the power supplies and

unplug the cables. Watch your step when carrying the product. Do not use

the product in an unstable location such as a place exposed to strong vi-

bration or a sloping surface.

Doing so may cause the product to fall, resulting in an injury or fault.

Damage Do not place anything on the product or expose the product to physical

shocks. Do not carry the product after the power has been turned on.

Doing so may cause a malfunction due to overloading or shock.

Damage

Since the product contains many electronic components, keep it away

from direct sunlight, high temperature, and high humidity to prevent con-

densation. Do not use or store the product where it is exposed to much

dust or a strong magnetic or electric field for an extended period of time.

Inappropriate operating or storage environments may cause a fault.

Damage Use the product within the ranges given in the specifications.

Operation over the specified ranges may cause a fault.

MB95330 Series EV Board MB2146-440-E Setup Guide, Doc. # 002-07604 Rev. *A 5

Damage

To prevent electrostatic breakdown, do not let your finger or other object

come into contact with the metal parts of any of the connectors. Before

handling the product, touch a metal object (such as a door knob) to dis-

charge any static electricity from your body.

Damage

Before turning the power on, in particular, be sure to finish making all the

required connections. Furthermore, be sure to configure and use the

product by following the instructions given in this document.

Using the product incorrectly or inappropriately may cause a fault.

Damage

Always turn the power off before connecting or disconnecting any cables

from the product. When unplugging a cable, unplug the cable by holding

the connector part without pulling on the cable itself. Pulling the cable itself

or bending it may expose or disconnect the cable core, resulting in a fault.

Damage It is recommended that it be stored in the original packaging. Transporting

the product may cause a damage or fault. Therefore, keep the packaging

materials and use them when re-shipping the product.

MB95330 Series EV Board MB2146-440-E Setup Guide, Doc. # 002-07604 Rev. *A 3

Contents

1. BGM Adapter Manual 6

BGM Adapter Overview ........................................................................................................6

Function List ..........................................................................................................................6

IDC10 Interface Description ..................................................................................................7

BGM Adapter USB Configuration ..........................................................................................7

LED Description 10

2. EV board Introduction 11

EV board Overview .............................................................................................................11

Function List .......................................................................................................................12

EV-board Schematic ...........................................................................................................12

HW Module Description .....................................................................................................13

3. EV Board Operation 15

Connect the Motor Connector and the Hall Sensor Connector ...........................................15

Select the Driving Method as Hall Sensor or Back EMF .....................................................15

Start and Stop Motor ...........................................................................................................16

Adjust Motor Speed .............................................................................................................17

Reverse Motor Rotation ......................................................................................................17

4. Development Platform Quick Start 18

Tools Setup Sequence ........................................................................................................18

Open Project and Start Debug ............................................................................................18

5. Additional Informations 19

Revision History 20

MB95330 Series EV Board MB2146-440-E Setup Guide, Doc. # 002-07604 Rev. *A 6

1. BGM Adapter Manual

1.1 BGM Adapter Overview

Below is a close look of MB95330 Series BGM Adapter. The part number is MB2146-08-E. It

provides a debugging platform for the MB95330 Series MCU in a small size of

55.7mm (W) 127mm (D) 30mm (H).

Figure 1-1. BGM Adapter overview

1.2 Function List

ID Function description Remarks

1 Support MB95330 Series MCU MCU MAX machine clock: 16.25 MHz

MCU power voltage: 2.4 V to 5.5 V

2 Break pointer 256 software breakpoints

3USB interface to PC/SOFTUNE Compatible with USB protocol version 1.1

41-Line UART interface to the

MB95330 Series MCU The Baud rate is 62,500 bps

5Support the MCU flash programming

for engineering development

The programming and reading speed is about

800 B/S.

MB95330 Series EV Board MB2146-440-E Setup Guide, Doc. # 002-07604 Rev. *A 7

BGM Adapter Manual

1.3 IDC10 Interface Description

1.4 BGM Adapter USB Configuration

The BGM Adapter is provided with a USB cable. Connect the BGM Adapter to PC with the USB

cable. If the connection is right, the following window will pop up. Follow the instructions displayed,

and then click "Next".

Figure 1-2. Install BGM Adapter in Windows (1)

Pin Number Pin Name Description

1 UVCC Target MCU Vcc

2 GND Target MCU Vss

3RSTIN

Target MCU reset input / 10V output

CAUTION: Do not connect RSTIN to this device

(MB95330Series)

4 RSTOUT Target MCU reset output

5RSV Reserved

6RSV Reserved

7RSV Reserved

8 DBG Target MCU debugging pin

9RSV Reserved

10 RSV Reserved

MB95330 Series EV Board MB2146-440-E Setup Guide, Doc. # 002-07604 Rev. *A 8

BGM Adapter Manual

Select “Install from a list or specific location (Advanced)”, then click “Next”,

Figure 1-3. Install BGM Adapter in Windows (2)

Select “…\Drivers” from the folder where SOFTUNE is installed, click “Next”,

Figure 1-4. Install BGM Adapter in Windows (3)

MB95330 Series EV Board MB2146-440-E Setup Guide, Doc. # 002-07604 Rev. *A 9

BGM Adapter Manual

Select BGM Adapter (MB2146-08) as displayed below, and then click “Next”,

Figure 1-5. Install BGM Adapter in Windows (4)

Windows will install the driver automatically. Click “Finish” after the driver has completed the

installation normally. Then users can find the BGM Adapter is recognized as MB2146-08 in Windows

system.

Figure 1-6. BGM Adapter is installed in Windows

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de Cypress Semiconductor

Cypress Semiconductor

Cypress Semiconductor CYALKIT-E04 Series Manual de usuario

Cypress Semiconductor

Cypress Semiconductor FM4-U120-9B560 Manual de usuario

Cypress Semiconductor

Cypress Semiconductor CapSense Express CY3218-CAPEXP2 Manual de usuario

Cypress Semiconductor

Cypress Semiconductor S6SAP412A Manual de usuario

Cypress Semiconductor

Cypress Semiconductor F2MC-16FX Series Manual de usuario

Cypress Semiconductor

Cypress Semiconductor S6SAP412A Manual de usuario

Cypress Semiconductor

Cypress Semiconductor S6SBP401AJ0SA1001 Manual de usuario

Cypress Semiconductor

Cypress Semiconductor CapSense CY8CKIT-024 Manual de usuario

Cypress Semiconductor

Cypress Semiconductor FM4 S6E2 Series Manual

Cypress Semiconductor

Cypress Semiconductor CYP15G0101DXB Manual de usuario

Cypress Semiconductor

Cypress Semiconductor CY8CKIT-002 Manual de usuario

Cypress Semiconductor

Cypress Semiconductor POWERPSOC CY3267 Manual de usuario

Cypress Semiconductor

Cypress Semiconductor CYW920721B2EVK-02 Manual de usuario

Cypress Semiconductor

Cypress Semiconductor CY4541 EZ-PD CCG4 Manual de usuario

Cypress Semiconductor

Cypress Semiconductor CY8CKIT-037 Manual de usuario

Cypress Semiconductor

Cypress Semiconductor FM4 Series Manual de usuario

Cypress Semiconductor

Cypress Semiconductor CY8CKIT-026 Manual de usuario

Cypress Semiconductor

Cypress Semiconductor CYS25G0101DX-ATC Manual de usuario

Cypress Semiconductor

Cypress Semiconductor CY3210-PSoCEVAL1 Manual de usuario

Cypress Semiconductor

Cypress Semiconductor CYUSB3KIT-003 Manual de usuario

Cypress Semiconductor

Cypress Semiconductor S6SAE100A00VA1001 Manual de usuario

Cypress Semiconductor

Cypress Semiconductor MB2146-302A Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario