CYP CDPS-P311R Manual de usuario
CDPS-P311R
HDMI/VGA Video Streamer with Recording
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2018 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document are
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
• Please completely disconnect the power when the unit is not in
use to avoid wasting electricity.
VERSION HISTORY
REVISION DATE SUMMARY OF CHANGE
RDV1 2019/06/24 Preliminary release
CONTENTS
1. Introduction................................................. 1
2. Applications................................................ 1
3. Package Contents ..................................... 2
4. System Requirements................................. 2
5. Features....................................................... 3
6. Operation Controls and Functions............ 4
6.1 Front Panel .............................................4
6.2 Rear Panel..............................................6
6.3 Remote Control.....................................7
6.4 RS-232 Pinout and Defaults ..................8
6.5 WebGUI Control ....................................9
6.5.1 Live Tab .......................................11
6.5.2 Streaming Tab ............................12
6.5.3 Audio Mixer Tab .........................15
6.5.4 Video Switch Tab .......................16
6.5.5 EDID Setting Tab.........................18
6.5.6 Record Setting Tab ....................20
6.5.7 Time Setting Tab.........................23
6.5.8 User Cong Tab..........................24
6.5.9 System Setting Tab.....................25
6.6 Telnet Control ......................................27
6.7 RS-232 and Telnet Commands ..........28
7. Connection Diagram ............................... 44
8. Specications ........................................... 45
8.1 Technical Specications ....................45
8.2 Video Specications...........................46
8.3 Audio Specications...........................48
8.3.1 Digital Audio...............................48
8.3.2 Analog Audio .............................48
8.4 Cable Specications ..........................49
9. Acronyms .................................................. 50
1
1. INTRODUCTION
This Video Streaming Recorder makes online broadcasting of live
video, with a locally stored archive, an easy and simple process.
Video sources from cameras, PCs, video game consoles, etc. are a
breeze to connect for immediate broadcast and recording. Video
content up to 4K UHD+ is supported and is automatically scaled to a
resolution that is more appropriate for efcient streaming. In addition
to the standard HDMI input, a VGA input with a paired analog stereo
audio input is also available as a source. An HDMI output is provided
for local monitoring of the selected input source.
All video content is encoded and streamed with minimal latency
and high quality making it ideal for live streaming events to a variety
of popular online streaming services or within the local network. The
video may also be recorded locally (via SD card or USB thumb drive)
or to a local network drive while it is being streamed. An audio mixer
function is included, allowing an external audio source to be mixed
with the embedded audio of your HDMI source (LPCM 2.0 only) for
your video stream.
Comprehensive EDID management provides improved compatibility
with different sink devices. The intuitive WebGUI provides easy control
of your live event stream including source selection, resolution, bitrate
and more. Audio functions include volume level adjustment, mute,
and mixer source selection. This unit can be controlled and congured
via front panel buttons, an intuitive WebGUI, RS-232, or Telnet.
2. APPLICATIONS
• Webcasting
• Social Media Broadcasting
• Live Event Streaming
• Video on Demand Streaming
• Live recording and storage
2
3. PACKAGE CONTENTS
• 1× HDMI/VGA Video Streamer with Recording
• 1× 5V/2.6A DC Power Adapter
• 1× Remote Control (CR-187)
• 1× Operation Manual
4. SYSTEM REQUIREMENTS
• HDMI or VGA source equipment such as a media player, video
game console, PC, or video camera.
• Available streaming server destination such as YouTube or
Facebook or a recording storage target such as an SD Card or USB
thumb drive.
• HDMI receiving equipment such as an HDTV, monitor or audio
amplier.
• The use of Premium High Speed HDMI cables is highly
recommended.
• Video streaming preview support within the WebGUI requires the
use of the Chrome, Internet Explorer or Safari browser with the
appropriate plugins (VLC for IE and Safari or VXG Player for Chrome)
installed.
Note: The Firefox browser does not currently support the WebGUI’s
video streaming preview window.
• To view RTSP streams directly on the local network, RTSP stream
compatible video player software (such as VLC Media Player or
PotPlayer) must be used.
3
5. FEATURES
• 1 HDMI input and 1 VGA input
• 1 HDMI output (for local source monitoring)
• HDCP 1.x and HDCP 2.2 compliant
Note: HDCP encrypted sources cannot be streamed over the
Internet or recorded and will be blacked out
• HDMI input/output supports resolutions up to 4K UHD (18Gbps,
4K@60Hz 4:4:4, 8-bit)
• VGA input supports resolutions up to 1920×1080@60Hz
• Advanced H.264 video streaming and recording is provided at
QVGA (320×240), VGA (640×480), 720p, or 1080p at up to 60fps
• Recorded video can be stored on a locally inserted SD card, USB
thumb drive, or to a designated network drive
• Can act as a streaming server (using RTP/RTSP protocols) or
streaming client (using the RTMP protocol)
• Audio embedding and mixing support with the analog stereo audio
input
Note: Analog audio can only be mixed with LPCM 2.0 audio from
the HDMI source
• Supports scheduled recording with an internet updated calendar
• Supports text overlays over live broadcasts including a countdown
timer
• Integrated downscaling function will convert UHD video content (up
to 4K@60Hz) down to 1080p or lower for live video broadcast and
recording
• Generates 4 simultaneous streams from the same video source
(1080p@60fps, 1080p@30fps, VGA@30fps, QVGA@30fps) for easy
system integration at multiple bandwidth targets
• Supports automatic input switching
• Advanced EDID management including Internal , External & User
congured EDID selections
• Control via front panel buttons, WebGUI, Telnet, RS-232, and IR
4
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
SELECT
STARTPOWERIRSTOP SOURCE PLAY STOP
AUDIO
RECORD
STORAGE
Micro SD
1 2 4 5 6 7 8 93
1POWER Button & LED: Plug the 5V DC power adapter into this
port and connect it to an AC wall outlet for power. The LED will
illuminate green to indicate the unit is on and receiving power.
When the unit is in stand-by mode the LED will illuminate red.
Note: The Power LED will blink while video recording is active.
2IR Window: Accepts IR signals from the included IR remote for
control of this unit only.
3RECORD START Button: Press this button to immediately start
recording to the designated recording target.
RECORD STOP Button: Press this button to immediately stop any
current recording session.
4SOURCE Button: Press this button to toggle between the HDMI and
VGA inputs. The status LED will change depending on the input
selection.
Note: Changing the input source will cause the video stream to
restart. Connected stream targets may need to be restarted or
reconnected.
5Status LED: This multi-function LED indicates the current video
source selection, audio mixer state and RTMP streaming client
status.
LED State Description
RED Video source is VGA
BLUE Video source is HDMI
PURPLE Video source is HDMI, Audio Mixer is enabled
Solid (any color) RTMP streaming client is inactive
Blinking (any color) RTMP streaming client is active
5
6AUDIO SELECT Button: Press this button to enable/disable the
Audio Mixer function. The mixer’s settings are congured within the
WebGUI.
7PLAY Button: Press this button to start streaming to the congured
target server. The Status LED will blink to indicate the stream is
currently active.
Note: The target streaming service controlled by this button is
defined in the WebGUI.
8STOP Button: Press this button to stop streaming to the congured
target server. The Status LED will be lit solidly to indicate the stream
is stopped.
9Micro SD STORAGE Slot: Insert a standard Micro SD card for storage
of recorded video. (Optional)
Note: SD/SDHC/SDXC/SDUC memory cards are supported. Storage
media must be formatted as FAT32 or exFAT. Video files are stored
in *.mp4 format.
Tabla de contenidos
Otros manuales de Reproductor multimedia de CYP
