CYP CPLUS-VPE2DD Manual de usuario
CPLUS-VPE2DD
4K UHD+HDMI Dolby Digital & DTS
Stereo Decoder
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2018 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S.
and worldwide patents issued & pending. DTS,
the Symbol, & DTS and the Symbol together are
registered trademarks & DTS 2.0+Digital Out is a
trademark of DTS, Inc. Product includes software.
© DTS, Inc. All Rights Reserved.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
RDV1 17/07/15 Preliminary release
VS1 12/02/18 Final technical review
CONTENTS
1. Introduction......................................................1
2. Applications.....................................................1
3. Package Contents ..........................................1
4. System Requirements......................................1
5. Features............................................................2
6. Operation Controls and Functions.................3
6.1 Front Panel ................................................. 3
6.2 Rear Panel.................................................. 4
6.3 Virtual COM Port Control ......................... 5
6.4 EDID Commander..................................... 7
6.4.1 EDID Controller Tab.......................... 7
6.4.2 EDID Creator Tab ............................. 8
6.4.3 System Tab........................................ 9
7. Connection Diagram ....................................10
8. Specications ................................................11
8.1 Technical Specications ........................ 11
8.2 Video Specications............................... 12
8.3 Audio Specications............................... 13
9. Acronyms .......................................................14
1
1. INTRODUCTION
This HDMI Dolby Digital & DTS Stereo Decoder supports the transmission
of high bandwidth (18Gbps) video and allows the associated audio
signal to be simultaneously extracted and split to both digital and
analog audio outputs, providing high quality audio and video
performance.
This unit can decode standard Dolby Digital & DTS formats up to 5.1
and output the audio as stereo (LPCM 2.0) over HDMI, S/PDIF (optical
and coaxial) and analog RCA connections. It can also support the
passthrough of Bitstream, HD Bitstream, or LPCM 7.1 with audio
sampling rates up to 192kHz if needed. If the connected display
supports ARC (Audio Return Channel), and has it enabled, then this
unit can extract the ARC audio and output it via all available audio
outputs.
Both the input and output HDMI ports support 4K UHD resolutions up
to 4K@60Hz (4:4:4, 8-bit). Built-in EDID management support allows
the user to select from multiple EDIDs and, with the use of optional PC
software, to upload, download, or edit EDID les.
2. APPLICATIONS
• Audio extraction for use with non-HDMI AV receivers or powered
speaker systems
• AV system integration and home theater installation
• Supporting HDMI sources on DVI displays with analog or external
speaker systems
• HDMI/DVI EDID management
3. PACKAGE CONTENTS
• 1×HDMI Dolby Digital & DTS Stereo Decoder
• 1×5V/2.6A DC Power Adapter
• 1×Operation Manual
4. SYSTEM REQUIREMENTS
• HDMI source equipment such as a media player, video game
console or set-top box.
2
• HDMI receiving equipment such as an HDTV, monitor or audio
amplier.
• Audio receiving equipment such as an audio amplier or powered
speakers.
• The use of “Premium High Speed HDMI” cables is highly
recommended.
5. FEATURES
• HDMI input and output with 18Gbps (600MHz) 4K UHD support
• DVI 1.0 compatible with the use of an HDMI-DVI adaptor
• HDCP 1.4 and 2.2 compliant
• Supports HD resolutions up to 3840×2160@60Hz (4:4:4, 8-bit) &
4096×2160@60Hz (4:4:4, 8-bit)
• Supports 48-bit Deep Color up to 1080p@60Hz
• Supports passthrough of LPCM 7.1, Bitstream and HD Bitstream
audio formats over HDMI
• Embedded Dolby Digital Decoder technology
• Embedded DTS 2.0+Digital Out Decoder technology
• Integrated digital interpolation lter and Digital-to-Analog Converter
(DAC)
• Supports LPCM sampling rates up to 96kHz
• Supports Dolby Digital sampling rates up to 48kHz
• Supports DTS sampling rates up to 96kHz
• Simultaneous audio output via HDMI, analog stereo, Coaxial and
Optical
• Supports coaxial and optical audio sampling rates up to 96kHz
• Supports extracting the HDMI audio signal from an HDTV’s ARC
feature
• Provides EDID management with EDID bypass and 1 user modiable
EDID
• PC based EDID management tool support
• Supports RS-232 style control via a Virtual COM port over USB
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER PCM
D
4K UHD+ Dolby Digital & DTS Stereo Decoder
ARC
1 2 3 4 5
1POWER: This LED will illuminate to indicate the unit is on and
receiving power.
2PCM: This LED will illuminate when LPCM audio is detected on the
HDMI input. If the ARC function is active, this LED will illuminate
when LPCM is detected from the ARC source.
3DTS: This LED will illuminate when DTS 2.0+Digital audio is detected
on the HDMI input. If the ARC function is active, this LED will
illuminate when DTS 2.0+Digital audio is detected from the ARC
source.
4DOLBY DIGITAL: This LED will illuminate when Dolby Digital audio is
detected on the HDMI input. If the ARC function is active, this LED
will illuminate when Dolby Digital audio is detected from the ARC
source.
5ARC: Pressing the this button will enable/disable the unit’s ARC
(Audio Return Channel) functionality. When the ARC function is
enabled, the LED will illuminate and ARC audio sent back from
the connected display will be output over all local audio outputs.
When the ARC function is not enabled the LED will remain off.
Note: Please ensure that the connected display supports ARC and
that the display’s ARC function is enabled before activating the
ARC functionality of this unit. Failure to meet these requirements
will result in no audio output.
4
6.2 Rear Panel
HDMI OUTHDMI IN
LRCOAX
OPTICAL
DC 5V
SPDIF EDID SERVICE
HDMI
AUDIO
BYPASS/
2CH
BYPASS/
2CH
STD/
TV
AUDIO OUT
1 2 3 4 5 6 7 8
1HDMI IN: Connect to HDMI source equipment such as a media
player, game console or set-top box.
2HDMI OUT: Connect to an HDMI TV, monitor or amplier for digital
video and audio output.
3L/R OUT: Connect to powered speakers or an amplier for stereo
analog audio output.
COAX OUT: Connect to powered speakers or an amplier for
digital audio output using an appropriate coaxial cable.
OPTICAL OUT: Connect to powered speakers or an amplier for
digital audio output using an appropriate optical cable.
4HDMI AUDIO BYPASS/2CH: This switch controls the audio output
format for the HDMI port. Moving the switch to the left sets it to
“BYPASS” which allows audio to pass unchanged from the HDMI
input port. Moving the switch to the right sets it to “2CH” which
enables decoding Dolby Digital and DTS audio from the HDMI
input and down-mixing it to LPCM 2.0.
5S/PDIF BYPASS/2CH: This switch controls the audio output format
for the S/PDIF audio output ports (Optical and Coaxial). Moving
the switch to the left sets it to “BYPASS” which allows audio to pass
unchanged from the HDMI input port. Moving the switch to the
right sets it to “2CH” which enables decoding Dolby Digital and
DTS audio from the HDMI input and down-mixing it to LPCM 2.0.
6EDID STD/TV: This switch controls which EDID is sent to the
connected HDMI input device. Moving the switch to the left sets
it to “STD” mode which will use the internal (user) EDID. Moving
the switch to the right sets it to “TV” mode which will pass the EDID
from the connected display device to the HDMI input device.
Note: By default the “STD” EDID contains video resolution support
up to 1080p@60Hz and audio support including LPCM 2.0 up to
5
96kHz, Dolby Digital (5.1 channel) and DTS (5.1 channel).
7SERVICE: This slot is for EDID management, control and rmware
update use. Connect directly to your PC/laptop using a standard
Mini-USB cable to connect using the PC software or to send
commands (via virtual COM port).
8DC 5V: Plug the 5V DC power adapter into the unit and connect it
to an AC wall outlet for power.
6.3 Virtual COM Port Control
COM PORT SETTINGS
Baud rate 115200
Data bits 8
Parity None
Stop bits 1
Flow control None
COMMAND DESCRIPTION & PARAMETERS
?Show the full command list.
HELP Show the full command list.
SOURCEDET Show the current input source detection
state.
SINKINFO Show information about the currently
connected display.
HDCPIN N1 Set the HDCP handling mode for the HDMI
input.
Available values for N1:
1 [Follow Input]
2 [Follow Output]
3 [Apple Mode]
HDCPIN ? Show the current HDCP handling mode.
Otros manuales para CPLUS-VPE2DD
1
Tabla de contenidos
Otros manuales de Convertidor de medios de CYP
CYP
CYP CDM-160 Manual de usuario
CYP
CYP CDPS-US100R Manual de instalación
CYP
CYP CP-1283HDT Manual de usuario
CYP
CYP EL-5400-HBT Manual de usuario
CYP
CYP AU-11SA-4K22 Manual de usuario
CYP
CYP CLUX-2EN Manual de usuario
CYP
CYP CSC-5500 Manual de usuario
CYP
CYP CLUX-1HLR Manual de usuario
CYP
CYP QU-DV12DL Manual de usuario
CYP
CYP CLUX-SDI2VS Manual de usuario
CYP
CYP CP-261H Manual de usuario
CYP
CYP CHD-380 Manual de usuario
CYP
CYP CPRO-SE2DD Manual de usuario
CYP
CYP CM-388 Manual de usuario
CYP
CYP AU-22DD Manual de usuario
CYP
CYP AU-D150 Manual de usuario
CYP
CYP CPLUS-V2PE Manual de usuario
CYP
CYP CDL-165ETHG Manual de usuario
CYP
CYP AU-1H1DD Manual de usuario
CYP
CYP CUSB-603 Manual de usuario
