CyberData 011211 series Manual

Wall Mounting Options

Gang Box Mounting Options

Screw Wall Cutout

on Wall

Pre Drill Holes

121001A

Backplate

Accessory

Kit

to J1

Cable

Network

Rotate Backplate 180°

to use Top Cable Entry

Entry

Cable

Top

Slot

Entry

Cable

Top

Gang Box Mounting Screw (4x)

Wall Cutout

or Two Gang Box

Backplate accepts

Single Gang Box

Single Gang Box use two

Backplate 121002B

Kit

Accessory

Screw

Slot

Entry

Cable

Top

Getting Started

• Download the VoIP V3 Indoor Intercom Operations Guide PDF file from the following web page:

http://www.cyberdata.net/products/voip/digitalanalog/intercomindoorv3/docs.html

• Create a plan for the locations of your Intercoms.

• Prior to installation, consult local building and electrical code requirements.

• WARNING: This enclosure is not rated for any AC voltages!

Parts

Contacting CyberData

Parameter Factory Default Setting

IP Addressing DHCP

IP Addressa10.10.10.10

Web Access Username admin

Web Access Password admin

Subnet Maska255.0.0.0

Default Gatewaya10.0.0.1

a. Default if there is not a DHCP server present.

(4) Plastic Ribbed Anchor (4) #6-32 FlatHead Countersunk

Machine Screw

(1) Wall Mounting Kit(1) Intercom Assembly (1) Gang Box Mounting Kit

(4) Sheet Metal Screw

Sales: (831) 373-2601 ext. 334

Support: 831-373-2601 ext. 333

Web: http://www.cyberdata.net/support/contactsupportvoip.php

RMA Dept: (831) 373-2601 ext. 136

Email: [email protected]

RMA Status: http://www.cyberdata.net/support/rmastatus.html

Warranty information is available at:

Web: http://www.cyberdata.net/support/warranty/index.html

Corporate Headquarters

CyberData Corporation

3 Justin Court

Monterey, CA 93940, USA

Phone: 831-373-2601

Fax: 831-373-4193

www.CyberData.net

The IP Endpoint Company

Installation Quick Reference

VoIP V3 Indoor Intercom

SIP Compliant

011211*, RAL 9003, Signal White

*Replaces the 011111 number.

RTFM Button

Dimensions

Maximum Recommended Wall Cutout Dimensions

SW1

When the device is operational and linked to a network, you can

use the Reset Test Function Management (RTFM) button (SW1

[see picture]) to announce the device’s IP address or restore the

device to the factory

default settings.

To announce the device’s current IP address:

• Press and release the RTFM button within a five second

window.

Note The device will use DHCP to obtain the new IP

address (DHCP-assigned address or default to

10.10.10.10 if a DHCP server is not present).

To restore the device to factory default settings:

• Press and hold the RTFM button for longer than five

seconds until you hear the device announce that it is

restoring the factory default settings.

4.53 [115.0]

2.22 [56.3]

DIMENSIONS ARE IN INCHES [MILLIMETER]

Dimensions are in Inches [Millimeter]

Wall Cutout

0.25[6.4]

Top Cable Entry Closed

Top Cable Entry Opening

Cable Connections

Terminal Block Connections

to J2

021078D

Speaker to J7

Back Plate

Push-Button

to J6

Microphone

PCBA

Mounting

Screws

Mounting

Screws

PCBA

J3 Terminal Block

Wire (IN)

Terminal Block

can accept

16 AWG wire

Relay Contact:

(1A at 30 VDC for continuous loads)

3 = Normally Open Common

4 = Normally Open Contact

5 = Door Sense Input

6 = Door Sense Ground Reference

2 = Power Ground*

1 = +12 to 24 VDC at 1000 mA (500 mA minimum)*

Alternate Power Input:

*Contacts 1 and 2 on the J3 terminal block are only for

powering the Intercom from a non-PoE +12VDC power

source as an alternative to Network PoE power. Use of

these contacts for any other purpose will damage the

Intercom and void the product warranty.

Otros manuales para 011211 series

Tabla de contenidos

Otros manuales de Sistema de intercomunicación de CyberData

CyberData

CyberData 11186 Manual de usuario

CyberData

CyberData VoIP Intercom 010935F Manual de usuario

CyberData

CyberData 11113 Manual de usuario

CyberData

CyberData 11113 Manual de usuario

CyberData

CyberData 011306 Manual

CyberData

CyberData 11310 Manual

CyberData

CyberData 11111 Manual de usuario

CyberData

CyberData RAL 9003 Manual

CyberData

CyberData 011309 Manual de usuario

CyberData

CyberData 011311 Manual

CyberData

CyberData 11310 Manual de usuario

CyberData

CyberData 11307 Manual de usuario

CyberData

CyberData 011211 series Manual

CyberData

CyberData 011309 Manual

CyberData

CyberData VoIP Intercom 010935B Manual

CyberData

CyberData VoIP Indoor Intercom 011030 Manual de usuario

CyberData

CyberData 11035 Manual de usuario

CyberData

CyberData VoIP Indoor Intercom 011030 Manual de usuario

CyberData

CyberData 11186 Manual de usuario

CyberData

CyberData 11111 Manual de usuario

CyberData

CyberData 11186 Manual de usuario

CyberData

CyberData VoIP Intercom 010935F Manual de usuario

CyberData

CyberData 11186 Manual de usuario

CyberData

CyberData 11035 Manual de usuario

Manuales populares de Sistema de intercomunicación de otras marcas

Bticino

Bticino LINEA 3000 Manual de usuario

MSI

MSI MSI-140 Manual de usuario

golmar

golmar Stadio Plus Manual de usuario

Vidos

Vidos duo M1021 Manual de usuario

Vimar

Vimar ELVOX 7539/E Manual de usuario

SSS Siedle

SSS Siedle BTSV 850-03 Manual de usuario

Dahua

Dahua VTO Series Manual de usuario

Elvox

Elvox 5651 Manual de usuario

Videx

Videx VIDEOKIT Series Manual de usuario

Rocom

Rocom Doortello Business FW T2.05W2.04 Manual de usuario

Viking

Viking E-35-EWP Manual de usuario

Safeguard Supply

Safeguard Supply LRA-EX1000 Manual de usuario

SSS Siedle

SSS Siedle BFCV 850 Series Manual de usuario

GRD

GRD MAX V2 Manual de usuario

Alecto

Alecto ADI-250 Manual de usuario

Aiphone

Aiphone IE-8MD Manual de usuario

Perel

Perel EDB4 Manual de usuario

Bticino

Bticino Classe 300 Manual de usuario