CVW SWIFTZ 7109 Manual de usuario
SWIFT Z
5.5″ Wireless Monitor Kit
HDMI/3D LUT/HDR
User Manual
1
Overview
Thank you for purchasing our wireless monitor kit. The kit is a set of
touch-screen monitors with built-in wireless modules. It supports the
resolution format of up to 1080P/60Hz in wireless mode. It comes with
H.264 codec to enable clearer video and lower latency.
Full HD color LCD monitor, which adopts advanced integrated DSP
circuits and energy-efficient IPS LED panel, delivers low power
consumption and stable performance. The kit comes with HDMI input
and output, reverse power(to cameras), touch screen, supporting 3D
LUT and HDR. It is portable, user-friendly. A wide variety of advanced
features is included, such as Histogram, Audio Meter, Focus Assist,
False Color, Zebra Exposure, Anamorphic.
The kit comes with dual battery slot, you can use the power adapter or
the external battery as power source.
To insure the best use of the unit, please read the
user’s manual carefully
CAUTION
● This product should not be exposed dripping or splashing.
● Please place the wireless monitor on a flat with hard and stable
surface.
● In order to reduce the risk of electric shock of fire, please do not
expose the receiver/ transmitter to rain or moisture.
2
● Please avoid the heavy impact and drop onto the ground when
move the product.
● The screen of this product is made of glass. Please do not drop the
screen towards the ground. Keep away from injury if the screen is
broken.
● Keep the product away from the heat source, and avoid the
prolonged exposures to the sun as the LCD screen will be
damaged.
● To avoid damaging the product, please do not take apart or repair
the unit by yourself without the adjustable components in the unit.
● In order to better maintain the LCD screen and protect the cover,
please follow the following ways to avoid damages.
1. Please refrain from using the hard objects to hit the screen.
2. Please do not force to wipe the screen.
3. Please do not use the chemical solutions to clean the screen.
4. Please do not spray any detergent on the screen.
5. Please do not write on the screen directly.
6. Please do not stick on the screen.
7. Please simply wipe with a clean soft cloth and make sure no
water on the screen.
Special Notice
● The impact of radio waves (such as the following environment may
cause the abnormal audio and video (blocked image, noise...etc.).
1) Transmit near the wall which is hard for the radio waves to get
through.
3
2) Quite close to the refrigerator, metal fitment and appliances, or
net to the crowded situation.
● This product has been tested and manufactured to comply with
national electrical safety rules, however, there will be noise caused by
the interference with other machines in rare cased. If the interference
is happened, please keep a certain distance away from other
machines.
● The product is susceptible to interference from 5GHz wireless local
area network or other wireless devices.
●Optimal range between transmitter and receiver is between 1 meter
and 30 meters with in line of sight indoor.
● It will take 30-40 seconds to boot the system before wireless
communication start, the media receiver can not be operated during
this time.
Features
Transmission range up to 250m/800ft (LoS);
Ultra-low latency: 70ms;
Up to 1080P60Hz;
Selectable channels to minimize interference;
Both the TX monitor and RX monitor support HDMI IN and HDMI
OUT, a second monitor can be working via HDMI LOOP OUT;
Can work as a monitor alone if the wireless module is deactivated;
5.5 inches 1920x1080 full HD IPS screen with touch function;
Support 3D LUT;
Support HDR monitoring;
4
A panoply of auxiliary functions, including histogram, focus assist
and many others, enabling optimized exposure and focus;
DC8V power out to power your cameras;
Attachable sun hood ensure better viewing in bright sunlight.
CONTENTS
1. Product Layout ----------------------------------------- 6
1.1 Button Operation --------------------------------------- 7
5
1.2 Interface (Bottom) ------------------------------------ 7
1.3 Interface (Right) --------------------------------------- 8
1.4 Power Supply ------------------------------------------ 9
1.5 Mounting ------------------------------------------------ 9
1.6 Sun Hood ----------------------------------------------- 10
2. On-Screen Display Operation --------------------- 11
3. RTSP Mode Operation ---------------------------------13
4. Tools -------------------------------------------------------- 15
5. Technical Specifications ----------------------------- 19
6. Troubleshooting ---------------------------------------- 21
1. Product Layout
Front
6
Back
1.1 Button Operation
7
:
Turn on and off the power by pressing and holding the power button.
Video appears within a few seconds.
Lock and unlock the touch screen operation by pressing the power
button.
Note: Install the antennas before powering on.
MENU:
Press and hold the wheel to start the main menu. Press the wheel to
start the shortcut menu.
Rotate the wheel to select the needed option, press it again to
enable/disable the relevant tool.
(Learn more details: 2. On-Screen Display Operation)
1.2 Interface (Bottom)
8
Type-C: For 3D LUTs and firmware upgrades
DC OUT 8V: Barrel-type output for powering camera via the camera
adaptor. (Sony NP-FW50 & Canon LP-E6 & Panasonic DMW-BLF19,
etc.)
1.3 Interface (Right)
TX: Transmitter
RX: Receiver
HDMI IN: 1.4, HDMI signal input
HDMI OUT: 1.4, HDMI signal output
DC IN 12V: Barrel (5.5mm outer, 2.1mm inner), DC 7~24V Input
9
:3.5mm headphone jack
1.4 Power Supply
(1) The rear cover of the transmitter or receiver is installed with dual
battery slots, which is applicable to NP-F series of batteries.
● Batteries of Sony cameras:
Sony F970 F960 F950 F930 F770 F750 F730 F570 F550 F530
QM91D QM91 QM90D QM90 QM71D QM71 QM70D QM70 QM51D
QM51 FM71 FM70 series
●Battery switching instruction
When the battery/batteries is/are placed in the battery slot(s), battery
icon will appear on the upper right of the screen.
White battery icon: working; Gray battery icon: not working.
Double-tap the gray battery icon and it will be switched to a working
state in about 3 seconds, then it will be turned white.
Remark: Actual battery duration depends upon battery
specifications. Please remove the battery from the monitor if will
not be in use for a long period of time.
1.5 Mounting
There is a ¼-20 threaded hole on the bottom for mounting.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Monitor de CVW
