Cuisinart Easy Prep Pro FP8U Manual de usuario

Easy Prep Pro

FP8U / FP8SU

Congratulations on your purchase of the Cuisinart Easy Prep Pro.

For over 30 years Cuisinart’s aim has been to produce the very ﬁnest kitchen

equipment. All Cuisinart products are engineered for exceptionally long

life, and designed to be easy to use as well as to give excellent performance

day after day.

To learn more about our products and for recipe ideas, visit our website

www.cuisinart.co.uk

Contents

Product Control Guide ......................................................................... 4

Important Safety Cautions ................................................................. 5

Safety During Use ............................................................................... 7

Before First Use ................................................................................... 8

1 Selecting the Work Bowl............................................................... 8

2 Selecting the Blade/Disc ................................................................ 9

3 Setting Up the Food Processor

A Fitting and Removing the Large Work Bowl ................................................................. 10

B Fitting and Removing the Large Chopping/Mixing Blade .........................................10

C Fitting and Removing the Reversible Slicing and Grating/Shredding Discs..........11

D Setting Up the Small Work Bowl and Chopping/Mixing Blade...............................12

E Fitting and Removing the Work Bowl Cover .................................................................12

4 Machine Controls ......................................................................... 13

5 Machine Functions

A Chopping .................................................................................................................................14

B Mixing ...................................................................................................................................... 14

C Puréeing/Blending.................................................................................................................14

D Slicing.......................................................................................................................................15

E Grating/Shredding.................................................................................................................15

6 Cleaning &Maintenance ............................................................. 16

7 Troubleshooting ............................................................................ 17

UK Guarantee...................................................................................... 19

UK After Sales Service ....................................................................... 20

Wiring Instructions............................................................................. 21

Pusher Accessory

Large Chopping/

Mixing Blade

Medium Slicing &

Medium Grating/

Shredding Disc

Work Bowl Cover

Small Work Bowl (max 0.7L)

Large Work Bowl

(max 1.9L)

Fine Slicing &Fine

Grating/Shredding Disc

Product Control Guide

Feed Tube

Housing Base

Small Chopping/

Mixing Blade

Rubber Seal

Control Buttons

IMPORTANT SAFETY CAUTIONS

Carefully read all the instructions before using the appliance and

keep in a safe place for future reference.

Always follow these safety cautions when using this appliance to avoid

personal injury or damage to the appliance.

1. The appliance is not intended to be operated by means of external

timer or separate remote control system.

2. This appliance is not intended for use by persons with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction concerning use

of the appliance by a person responsible for their safety.

3. Children should always be supervised to ensure that they do not play

with this product.

4. This appliance shall not be used by children. Keep out of reach of

children during and after use.

5. Always inspect the appliance and appliance accessories before use for

noticeable signs of damage. Do not use if damaged, or if the appliance

has been dropped. In the event of damage, or if the appliance develops

a fault, contact the Cuisinart Customer Care Line (refer to “UK After

Sales Service section“ for further information).

6. Do not use the appliance if the lead is damaged. In the event of

lead damage, discontinue use immediately. If the lead is damaged it

must be replaced by the manufacturer. Return the appliance to the

Customer Care Centre (refer to ‘UK After Sales Service’ section for

further information). No repair must be attempted by the consumer.

7. Never pull the plug out of the mains socket by the lead.

8. Do not wrap the lead around the main body of the appliance during

or after use.

9. Always ensure the voltage to be used corresponds with the voltage on

the appliance; this is indicated on the bottom of the housing.

10. Always disconnect the appliance from the electrical supply if it is

left unattended and before assembling, disassembling or cleaning.

11. For indoor, domestic use only.

12. This product complies fully with all appropriate EU and UK legislation

and the standards relevant to this type and class of appliance. We

are an ISO9001:2015 certiﬁed company that continually evaluates

our Quality Management System performance. If you have any

queries regarding product safety and compliance, please contact

our Customer Services Department (see “U.K. After Sales Service”

section).

WARNING: Polythene bags over the product or packaging may

be dangerous. To avoid danger of suffocation, keep away from

babies and children. These bags are not toys.

Safety During Use

nHandle the blades and discs with extreme care, they are very sharp.

nNever place a blade or disc directly on the motor spindle of the

housing base. Always ensure the bowl is in place.

nBefore switching on the processor, ensure that the blade/disc is

locked into place on the the motor spindle (taking care to avoid the

sharp edges), and that the lid is correctly fitted. Do not force or block

the lid mechanism.

nAlways carefully insert the blade before adding the ingredients.

nTo grate or slice food always use the pusher provided. Never push

food in with your fingers or use other utensils.

nKeep hands, spatulas and other utensils away from moving blades or

discs whilst appliance is in operation. Only use the spatula once the

food processor motor has stopped.

nAlways wait for the blade / disc to stop before removing the pusher

or lid.

nDisconnect the appliance from the mains supply before cleaning or

removing it or any of the attachments.

nAlways remove the bowl from the motor base before very carefully

removing the blade / disc.

nNever leave the appliance unattended when switched on or plugged

in.

nAlways ensure the blades and discs have been thoroughly cleaned

after each use and have dried completely before storing.

Before First Use

Take care when unpacking the chopping/mixing blades and the reversible slicing/

grating discs. The blades are very sharp and could cause injury.

To avoid injury, ensure the raised ﬁnger grips on the plastic casing are used to remove the

blades from their plastic packaging and carefully remove cardboard and tape from the

reversible slicing/grating discs. Retain the plastic casings for safe storage.

Before using your Cuisinart Easy Prep Pro for the ﬁrst time, wash the large and small

work bowls, work bowl cover, pusher accessory, chopping/mixing blades, and both slicing/

grating discs.

1. Selecting the Work Bowl

nThe Food Processor is supplied with two work bowls.

nThe large work bowl has a maximum capacity of 1.9L and can be used with the large

chopping/mixing blade and the two reversible slicing and grating/shredding discs.

nThe small work bowl has a maximum capacity of 0.7L and can be used with the small

chopping/mixing blade only. The seal on the inner bowl prevents any leakage into the

large work bowl, allowing you to use the small bowl without the need to wash up the

large bowl after use.

N.B. The large work bowl must always be ﬁtted before the small work bowl can be set up

inside.

It will not always be possible to use the work bowls to their maximum capacity. The

amount of food/liquid you can process in the bowls will depend on the density of the

ingredients in the work bowl and the consistency of the desired end result. For example,

to achieve a consistent result when chopping or pureeing nuts, fruits, vegetables or meats

you may need to process in batches of 300-500g. If you are mixing dough which can be

very dense, you may need to process in batches of around 400g.

If you ﬁnd that the motor is struggling or that the processing results are uneven, then

we would recommend that you reduce the amount of ingredients in the work bowl and

instead process in batches.

For liquid, we recommend that you do not ﬁll the bowls above the Maximum Liquid Fill

markings on each bowl (900ml on the large work bowl and 300ml on the small work

bowl.) This is to avoid liquid spilling into the central spindle which may cause leakage.

N.B If you are processing very thin liquid such as water in the large bowl, you may need

to reduce the amount of liquid to around 600ml to avoid thin liquid escaping from the lid.

2. Selecting the Blade/Disc

For chopping, mixing, blending and puréeing use the chopping/mixing blades.

nThe large chopping/mixing blade can only be used with the large work bowl.

nThe small chopping/mixing blade can only be used with the small work bowl.

For slicing and grating/shredding use one of the reversible discs.

nUse one disc for fine slicing (2mm) and fine grating/shredding.

nUse the other disc for medium slicing (4mm) and medium grating/shredding.

Both discs are labelled accordingly.

Fine Slicing or Fine Grating/Shredding

Medium Slicing or Medium Grating/Shredding

Fine Slicing Fine Grating/Shredding

Medium Slicing Medium Grating/Shredding

FP-8FD

FINE SLICING

MADE IN CHINA

FABRIQUÉ EN CHINE

FP-8FD

FINE SHREDDING

MADE IN CHINA

FABRIQUÉ EN CHINE

FP-8MD

MEDIUM SLICING

MADE IN CHINA

FABRIQUÉ EN CHINE

FP-8MD

MEDIUM SHREDDING

MADE IN CHINA

FABRIQUÉ EN CHINE

3. Setting Up the Food Processor

A Fitting and Removing the Large Work Bowl

nPlace the food processor base on a dry, flat, sturdy surface.

nPlace the large work bowl over the motor spindle, ensuring that the handle of the bowl

is positioned to the right of the centre.

nTurn the work bowl in a clockwise direction until it locks into position on the housing

base.

nTo remove, grasp the handle and turn the work bowl anti-clockwise until it unlocks. Lift

up and away.

N.B. The work bowl may be stiff during the first few times of use.

B Fitting and Removing the Large Chopping/Mixing Blade

nSet up the large work bowl as directed in 3A.

nHolding the central plastic stem, carefully lift and place the large chopping blade over

the work bowl’s centre spindle. Push the blade down until it can go no further.

N.B. Always fit the blade in the bowl before adding ingredients.

nTo remove, hold the central plastic stem of the blade and lift up and away from the work

bowl’s centre spindle.

WARNING: Take great care when handling the blades; they are sharp and can cause

injury.

Large Chopping/Mixing Blade

Push down

Centre Spindle of Large

Work Bowl

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Procesador de alimentos de Cuisinart

Cuisinart

Cuisinart SM-FP Manual operacional

Cuisinart

Cuisinart CH-4DC - Die-Cast Elite Collection... Manual de usuario

Cuisinart

Cuisinart FP-12C Series Manual de usuario

Cuisinart

Cuisinart HFP-300BK - PrepExpress Handheld Food... Manual de servicio

Cuisinart

Cuisinart RMC-100XA Manual operacional

Cuisinart

Cuisinart FP12DCSE Manual de usuario

Cuisinart

Cuisinart DLC-2A Series Manual operacional

Cuisinart

Cuisinart PrepExpress HFP-300 Manual de usuario

Cuisinart

Cuisinart Elemental FP-13DSV Manual de servicio

Cuisinart

Cuisinart EVOLUTIONX CORDLESS RMC-100C Manual operacional

Cuisinart

Cuisinart CTG-00-SPIC Guía rápida

Cuisinart

Cuisinart Elemental ECH-4 Manual operacional

Cuisinart

Cuisinart FP-12 - Elite Food Processor Manual de usuario

Cuisinart

Cuisinart DLC3E Manual de usuario

Cuisinart

Cuisinart CFP-11BCPCC Manual de servicio

Cuisinart

Cuisinart EVOLUTIONX RMC-100 Manual operacional

Cuisinart

Cuisinart CompleteChef FPC-100C Manual de usuario

Cuisinart

Cuisinart MFP-107C Series Manual de usuario

Cuisinart

Cuisinart Elite Collection MFP-108C Series Manual de usuario

Cuisinart

Cuisinart CTG-00-PCH Manual de servicio

Cuisinart

Cuisinart Elite Collection FP-12 Series Manual de usuario

Cuisinart

Cuisinart CH4DCU Manual de usuario

Cuisinart

Cuisinart DLC-2007NC - Food Processor - 7 Cup Manual de servicio

Cuisinart

Cuisinart Mini-Prep DLC-1 Manual de servicio

Manuales populares de Procesador de alimentos de otras marcas

INNOLIVING

INNOLIVING INN-727 Manual de usuario

Berkel

Berkel C32 Manual de usuario

Beko

Beko CHP5554W Manual de usuario

KitchenAid

KitchenAid 5KFP0719 Manual de usuario

QUIGG

QUIGG KM 2017Wi.20 Manual de usuario

Lakeland

Lakeland PRESS AND CHOP 31557 Manual de usuario

Bosch

Bosch MMR08 GB Series Manual de usuario

HOFFEN

HOFFEN Chef Express T9532 Manual de usuario

Garland

Garland 852 ZG Manual de usuario

Robot Coupe

Robot Coupe CL50 Gourmet Manual de usuario

SAPIRHOME

SAPIRHOME SP-1111-K Manual de usuario

Moulinex

Moulinex DJ3051 Manual de usuario

Bosch

Bosch MUM5 Manual de usuario

cecotec

cecotec Mambo Touch Manual de usuario

KitchenAid

KitchenAid 9KFC0516 Manual de usuario

Black & Decker

Black & Decker hc 300 Instrucciones de instalación

Gorenje

Gorenje SBR 1000 DV Manual de usuario

Arzum

Arzum AR 1128 Manual de usuario