Crystal Image Technologies RM-F21 Manual de usuario

21.5” FHD 1920 x 1080 LCD

User Manual

1U LCD Console Drawer

RM-F21

Options :

- HDMI / SDI

- Full Range KVM

- DC power

dedicated KVM switch and rackmount screen technology

751

UM-CV-751-F121-Q316V1 www.rackmountsales.com

Legal Information

First English printing, October 2002

Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness

of the contents. The information in this document is subject to change without notice. We are not liable for any injury or

loss that results from the use of this equipment.

Safety Instructions

Please read all of these instructions carefully before you use the device. Save this manual for

future reference.

■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.

■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with

temperatures not exceeding 40º Celsius (104º Fahrenheit).

■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing

damage to other equipment or injury to persons nearby.

■When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the

power supply. Proper air convection is necessary to keep it from overheating.

■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.

■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current

labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed

on the equipment’s ratings label.

■Observe all precautions and warnings attached to the equipment.

■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being

damaged by transient over-voltage.

■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power

supply or on other hardware may cause damage, ﬁre or electrical shock.

■Only qualiﬁed service personnel should open the chassis. Opening it yourself could damage the equipment and

invalidate its warranty.

■If any part of the equipment becomes damaged or stops functioning, have it checked by qualiﬁed service personnel.

What the warranty does not cover

■Any product, on which the serial number has been defaced, modiﬁed or removed.

■Damage, deterioration or malfunction resulting from:

□Accident, misuse, neglect, ﬁre, water, lightning, or other acts of nature, unauthorized product modiﬁcation, or

failure to follow instructions supplied with the product.

□Repair or attempted repair by anyone not authorized by us.

□Any damage of the product due to shipment.

□Removal or installation of the product.

□Causes external to the product, such as electric power ﬂuctuation or failure.

□Use of supplies or parts not meeting our speciﬁcations.

□Normal wear and tear.

□Any other causes which does not relate to a product defect.

■Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation.

Any changes or modiﬁcations made to this equipment may void the user’s authority to operate this equipment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

■Re-position or relocate the receiving antenna.

■Increase the separation between the equipment and receiver.

■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

UM-CV-751-F121-Q316V1 www.rackmountsales.com

< Part. 3 > Options

3.1 3G / HD / SD-SDI Broadcast-grade input

3.2 HDMI

3.3 DC Power : 12V / 24V / 48V / 110 ~ 125V

P.13

P.14

< Part. 2 > Specif cations / OSD

2.1 Product Speciﬁcations

2.2 Keyboard / Mouse Speciﬁcations

2.3 On-screen Display Operation ( OSD )

P.6 - 7

P.8 - 10

P.11 - 12

< Part. 1 > RM-F21

1.1 Package Content

1.2 Structure Diagram & Dimension

1.3 Installation

1.4 Connection

Contents

P. 1

P.1 - 2

P.3 - 4

P. 5

< Part. 4 > KVM Integration P.15

UM-CV-751-F121-Q316V1 www.rackmountsales.com

■It is very important to mount the equipment in a suitable cabinet or on a stable surface.

■Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive

dust, dirt, heat, water, moisture and vibration.

The equipment comes with the standard parts shown in package content. Check and make sure they are

included and in good condition. If anything is missing, or damaged, contact the supplier immediately.

Unpacking

Before Installation

How To Clean Your LCD Monitor

Caution :

■To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or

plugging your monitor into an electrical outlet.

■When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can

scratch or damage your display. Pressure damage is not covered under warranty.

■Use only cleansers made speciﬁcally for cleaning monitors and monitor screens. Cleansers not made to

clean monitors and monitor screens can scratch the LCD display or strip off the ﬁnish.

■Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly

onto the screen or case can cause damage which is not covered under warranty.

■Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based

paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

To clean your LCD safely, please follow these steps :

Disconnect the power cord.

Gently wipe the surface using a clean, dry microﬁber cloth. Use as little pressure as possible.

Cleaning Tough Marks and Smudges

To remove tough marks and smudges, please follow these steps :

Disconnect the power cord.

Spray a small amount of non-abrasive cleanser on a microﬁber cloth.

Gently wipe the surface. Use as little pressure as possible.

Wait until your monitor is completely dry before plugging it in and powering it up.

Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your

microf ber cloth f rst, not directly on the parts you are cleaning.

UM-CV-751-F121-Q316V1 www.rackmountsales.com

LCD interchangeable module kit

LCD membrane

Micro switch for screen auto power off

Installation Slides

Keyboard interchangeable module kit

Mouse interchangeable module kit

Carry handle to release the 2-pt lock

Membrane switch (KVM option)

Audio speaker ( for SDI or HDMI option )

Front USB port for device access ( USB Hub KVM only )

< 1.1 > Package Content

P. 1

< Part 1 >

RM-F21 unit X 1

- CX-6 6ft DVI-D console cable X 1

- Power cord X 1

- M6 screw, cage nut & cup washer X 8

< 1.2 > Structure Diagram

The above package content is only for the single console models.

It varies with options such as KVM, SDI, HDMI & DC power.

RM-F21

UM-CV-751-F121-Q316V1 www.rackmountsales.com

< 1.2 > Dimension

Side View

Top View

Front View

The weight is only for the single console models. It varies with accessories & options

such as KVM, SDI, HDMI & DC power.

P. 2

UNIT : mm

1mm = 0.03937 inch

Model Product Dimension

(W x D x H)

Packing Dimension

(W x D x H)

Net

Weight

Gross

Weight

RM-F21 441.6 x 670 x 44 mm

17.4 x 26.4 x 1.73"

595 x 860 x 140 mm

23.4 x 33.9 x 5.5”

14.7 kg

32.3 lb

18.9 kg

41.6 lb

Power

KB / MS

DVI-D

Rear View

UM-CV-751-F121-Q316V1 www.rackmountsales.com

RM-F21

< 1.3 > Installation - How to install Installation Slides

P. 3

■Fix the LCD console drawer into the rack.

Complete the installation

Step 3

■Insert the left and right rear mounting brackets into

the LCD console drawer.

Step 1

Step 2

■Measure the depth of the front and rear mounting rails.

■Align each rear mounting bracket to a suitable length.

M6 screw, cage nut & cup washer x 8 are provided.

UM-CV-751-F121-Q316V1 www.rackmountsales.com

P. 4

■Operate the LCD console drawer.

< 1.3 > Installation- How to use the drawer

■Hold the handle and slide out the drawer.

■Flip up the LCD to a suitable angle.

Flip up LCD from the side

Left Right

Front Side

LCD

Panel

■Add R at the end of the model no.

sample : RM-F21R

Option - Right Side Open

UM-CV-751-F121-Q316V1 www.rackmountsales.com

F121

DVI-D

LCD Console Drawer

USB server

P. 5

< 1.4 > Connection to USB Server via CX-6 cable

< 1.4 > Connection to external KVM via DVI-X cable

DVI console KVM

LCD Console Drawer

Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such

as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while

servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD

console drawer. Before attempting to connect anything to the LCD console drawer, we suggest

turning off the power to all devices. Apply power to connected devices again only after the LCD

console drawer is receiving power. The company is not responsible for damage caused in this way.

KB / MS

DVI-X DVI-D

console cable

Power

DVI-DUSB

DVI-X DVI-D

console cable

DVI-D USB

KB / MS

UM-CV-751-F121-Q316V1 www.rackmountsales.com

Environmental

Conditions

Operating Temperature 0 to 55°C degree

Humidity 20~90%, non-condensing

Altitude 16,000 ft

Storage /

Non-operating

Temperature -20 to 60°C degree

Humidity 5~90%, non-condensing

Altitude 40,000 ft

Shock 10G acceleration (11ms duration)

Vibration 5~500Hz 1G RMS random

Power Power Supply Range Auto-sensing 100 to 240VAC,

50 / 60Hz

Power Consumption

for Single Console

Screen ON Max. 32W

Power saving mode Max. 4W

Power button OFF Max. 1W

Power Consumption

with KVM integration

Screen ON Max. 62W

Power saving mode Max. 34W

*For details, please refer to our KVM rear kit user manuals

Regulatory Safety FCC & CE certiﬁed

Environmental RoHS2 & REACH compliant

< 2.1 > Product Specif cations

LCD

Panel

Manufacturer

Panel Size ( diagonal ) 21.5-inch Widescreen TFT color LCD

Display pixel ( dots x lines ) 1920 x 1080

Brightness ( typ. ) 250

Contrast Ratio ( typ. ) 1000:1

Color 16.7 M

Viewing Angle ( L/R/U/D ) 85/85/80/80

Response Time ( ms ) 5

Dot pitch ( mm ) 0.248

Display Area ( mm ) 476.64H x 268.11V

Surface treatment Haze 25%, Hard-coating

Surface hardness 3H

Backlight Type LED

MTBF ( hrs ) 30,000

Video

Connectivity

Digital HDMI HDMI 1.3, CEA-861-D

DVI DVI-D, TMDS single link

Plug & Play DVI VESA EDID structure 1.3

P. 6

< Part 2 >

Tabla de contenidos

Otros manuales de Cajón de LCD de Crystal Image Technologies

Crystal Image Technologies

Crystal Image Technologies RM-111-19W Manual de usuario

Crystal Image Technologies

Crystal Image Technologies RM-F117 Manual de usuario

Crystal Image Technologies

Crystal Image Technologies RM-K24A-R Manual de usuario

Crystal Image Technologies

Crystal Image Technologies RM-K17USD-A Manual de usuario

Crystal Image Technologies

Crystal Image Technologies RM-X17DAx3 Manual de usuario

Crystal Image Technologies

Crystal Image Technologies RMD-151-X17SD Manual de usuario

Crystal Image Technologies

Crystal Image Technologies RM-117K Manual de usuario

Crystal Image Technologies

Crystal Image Technologies RM-F117A-SD Manual de usuario

Crystal Image Technologies

Crystal Image Technologies RM-FD117A Manual de usuario

Crystal Image Technologies

Crystal Image Technologies RM-111-17A-MIL Manual de usuario

Crystal Image Technologies

Crystal Image Technologies RM-114-17 Manual de usuario

Crystal Image Technologies

Crystal Image Technologies RM-118-17 Manual de usuario

Crystal Image Technologies

Crystal Image Technologies KVM-2404QSS Manual de usuario

Crystal Image Technologies

Crystal Image Technologies RMD-151-A Series Manual de usuario

Crystal Image Technologies

Crystal Image Technologies RM-F117A-HDMI8 Manual de usuario

Crystal Image Technologies

Crystal Image Technologies RM-K24 Manual de usuario

Crystal Image Technologies

Crystal Image Technologies Combo Cat6 IP KVM-Cat5-IP08 Manual de usuario

Crystal Image Technologies

Crystal Image Technologies RM-X24 Manual de usuario

Crystal Image Technologies

Crystal Image Technologies RMD-151-F17 Manual de usuario

Manuales populares de Cajón de LCD de otras marcas

Acnodes

Acnodes KD 8228 Manual de usuario

Ameriwood

Ameriwood 9524328PCOM Manual de usuario

Kesseböhmer

Kesseböhmer TANDEM solo Manual de usuario

APW Wyott

APW Wyott Ease Extreme HDX-1-120 Manual de usuario

NTI

NTI RACKMUX-V17-N Manual de usuario

Austin Hughes

Austin Hughes CyberView L120 Manual de usuario

Uplift Desk

Uplift Desk STR018 Manual de usuario

Acnodes

Acnodes KDC 81932 Manual de usuario

Acnodes

Acnodes RK1200T Manual de usuario

StarTech.com

StarTech.com DuraView RACKCONS1501 Manual de usuario

Mocka

Mocka Mischa Manual de usuario

GRASS

GRASS DWD XP Manual de usuario

StarTech.com

StarTech.com DuraView RACKCONS1701 Manual de usuario

Fisher & Paykel

Fisher & Paykel IZONA CoolDrawer RB36S Manual de usuario

Synergy Global Technology

Synergy Global Technology LCD1U17-44 Manual de usuario

Fujitsu

Fujitsu RC25 Manual de usuario

Acnodes

Acnodes RK 1000B Manual de usuario

I-Tech

I-Tech RKP115 Manual de usuario