CryptoTelecom S-160 Manual de usuario

Network A/V Server S-160

User’s Manual

(Version1.0)

Introduction

¾The S-160 is a 4 channel video server with a built-in MPEG-4 CODEC and Streaming Server. The main

feature of the MPEG-4 CODEC and the built-in Streaming Server allows you to monitor real time images from

remote locations via Internet. S-160 features a Sensor Input, Relay Output, RS232C port that is designed to

control the functions of select pan/tilt/zoom cameras. S-160 supports both Static IP and Dynamic IP, and

can change the Communication Port resulting in one IP address supporting multiple S-160 video servers. In

summary, S-160system provides multiple access/control options to the user.

The examples of access/controls are as follows:

¾To get SMS message through Mobile Phone and E-mail message from PC when events occur.

¾To record Event in FTP server installed in remote place or S-160.

¾To search / delete / down-load / replay the recorded video.

¾To support various wireless devices such as Mobile Phone, PDA to see real time Video in Wireless Internet

handset.

For more information or inquiry, please contact us to the followings ;

Home Page : www.cryptotelecom.com

E-mail : [email protected]

Telephone ; 82-2-596-1331

Fax : 82-2-596-3707

Address : 5 floor, Seungwon Bldg.,810-9, Bangbae-dong, Seocho-gu, Seoul, 137-064, Korea

Software, Server and service may be charged according to change of policy or may be stopped

without prior notification. Appearance, function and specification may be changed without prior

notification. Our company assumes no responsibility for visible or invisible loss resulted from

changes in policy or products.

IMPORTANT NOTES

•Before operating the Vaddio StreamVIEW, please read the entire manual thoroughly. The system was

designed, built and tested for use indoors, and with the provided power supply and cabling. The use of a

power supply other than the one provided or outdoor operation has not been tested and could damage the

unit and/or create a potentially unsafe operating condition.

•Do not operate the S-160if the unit has been dropped or damaged. In this case, a Vaddio technician must

examine the product before operating.

•To reduce the risk of electric shock, do not immerse in water or other liquids and avoid extremely humid

conditions.

•Do not attempt to take the S-160 apart. There are no user-serviceable components inside.

•Do not use this product in connection with life safety or life monitoring related devices, i.e., medical

apparatus.

•Do not operate the S-160under the following conditions for any circumstance:

•Temperatures above 40°C (104°F)

•Temperatures below 0°C (32°F)

•High humidity, condensing or wet environments

•Dusty environments

•In inclement weather or under severe vibration

Contents

1. FEATURE …………………………………………………………………………….………7

1.1.UNPACKING…………………………………………………………………………………………..……….…7

1.2. EXTERNAL VIEW……………………………………………………………………………………..……..…...7

1.2.1.Front view …………………………………………………………. …………………………………………...7

1.2.2.Rear view ………………………………………………………. ………………………...………… …..……...8

2. INSTALLATION AND VIDEO CHECK……………………………………………………10

2.1.INSTALLATION…………………………………………………………………………………………….….…10

2.2.VIDEO CHECK…………………………………………………………………………………….……………10

3. BASIC SETTING……………………………………………………………………………16

3.1.CHECK NETWORK AND INSTALLATION TYPE……………………………………………………….….………16

3.2.INSTALLATION WITHOUT IP SHARING DEVICE (ROUTER)……………………………………………..……….16

3.2.1.Static IP Setup………………………………………………………………………………………….………..16

3.2.2.Dynamic IP Setup………………………………………………………………..………………….……..……20

3.3.INSTALLATION WITH IPSHARING DEVICE (ROUTER)……………………………………………….………...22

3.4.CAUTIONS…………………………………………………………………………………………….……….26

4. EXPERT SETTING…………………………………………………………………………28

4.1.GENERAL SETTING……………………………………………………………………………………..……..30

4.1.1.Title Setting………………………………………………………………………………..……..……...………30

4.1.2.Administrator’s ID and Password Change………………………………………………..………………….31

4.1.3.User Registration…………………………………………………………………………………….…………31

4.1.4.User List and Delete…………………………………………………………………………………...……….31

4.1.5.Skip Login (Automatic Monitoring) ………………………………………………………….….…………..32

4.1.6.Time Zone Setting ……………………………………………………………………………..………………32

4.1.7.Set Download Route of Plug-in Type ActiveX……………………………………..………………………...33

4.1.8.Select Language………………………………………………………………………………..………..……..33

4.2.NETWORK SETTING……………………………………………………………………………….…….……33

4.3.VIDEO &AUDIO SETTING……………………………………………………………………………..………34

4.3.1.Video Setting…………………………………………………….……………………….……………………..34

4.3.2.Audio Setting…………………………………………………………….…………………………….………..37

4.4.COLOR SETTING……………………………………………………………………..……………………….38

4.5.ALARM SETTING………………………………………………………………………………..…………….39

4.5.1.Alarm Event Setting……………………………………………………………………………..……………..39

4.5.2.Alarm Event Test…………………………………………………………………..…………..……………….40

4.6.DIO SETTING……………………………………………………………………………………..………….41

4.7.RS232C SETTING………………………………………………………………………………..………….42

4.8.PRESET SETTING………………………………………………………………………………….………...44

4.9.HOMEPAGE UPDATE………………………………………………………………………………………...45

4.10.FIRMWARE UPDATE……………………………………………………………………………….….……45

4.10.1.Remote Upgrade………………………………………………………………………………...….………45

4.10.2.System Re-booting………………………………………………………..…………………..……………47

5. BASIC USE………………………………………………………………….……………49

5.1.USE OF WEB VIEWER…………………………………………………………………….………………..49

5.2.USE OF IPSETTING UTILITY……………………………………………………………….………………51

5.3.USE OF PIMASERVER…………………………………………………………………….………………54

5.3.1.User Registration………………………………………………………….………………..……………….54

5.3.2.Camera Registration…………………………………………..……………………….……..…………….57

5.3.3.List of Camera………………………………………………………………………….……….…………...58

5.3.4.Change of User’s Information…………………………………………………………………….………..60

5.3.5. Search Camera………………………………………………….……………..………………….……….61

5.4.USE OF RELAY…………………………………………………………………………………….……….62

5.5.USE OF SENSOR…………………………………………………………………………………….……..63

5.6.SEE AND CONTROL OF STILL IMAGE IN MOBILE OR PDA ………………………………………….……..63

5.6.1.WAP2.0 (HTML) …………………………………………………..………………………….……….…….63

5.6.2.PDA(WinCE) ………………………………………………………………………………………...………66

5.7.USE OF PROPRIETARY VIEWER(MPEG4 COMMUNICATOR)……………………………………….…….67

5.7.1.Required Specification of PC and OS…………………………………………………………….…..…..67

5.7.2.Supported O/S…………………………………………………………………………………..…….…….67

5.7.3.Program Installation………………………………………………………………………….…….……….68

5.7.4.Use of Program……………………………………………………..……………….………….…………..71

5.7.4.1.Viewer Screen……………………………………………………………………….….……….…………..………71

5.7.4.2.General Setting Menu …………………………………………………………………………...…………..73

5.7.4.3.S-160 Connection……………………………………………………………………………………….…..………74

5.7.4.4.Play of Recorded File…………………………………………………………………………………….…....……76

5.7.4.5.Use of Pop-up Menu…………………………………………………………………………………….…..….…..77

6. NETWORK ENVIRONMENTS…………………………………………………….…….79

7. APPENDIX………………………………………………………………………….……81

1. Feature

1.1 Unpacking

Carefully remove the product and all of the parts from the packaging. Unpack and identify the following parts:

S-160 Power Adapter

Software CD Cross Cable

The content of the packaging includes, S-160 Main Unit, Power supply, User Manual, Software CD, Cross Cable

(for installation only). Please check contents before starting installation. Be sure to use the provided power

supply for the S-160. The Cross Cable is used only for Pre-View of Video before set-up and change of Network

Information.

Use only the power supply provided with the S-160 system.

Use of any unauthorized power supply will void any and all warranties.

1.2 External View

1.2.1 Front view

①

②

③

1) POWER : Light on when power is supplied.

2) LINK : Light on when LAN Cable is connected to S-160.

3) LAN : Light on when connected to Network.

1.2.2 Rear view

1) Power Supply : Excusive (provided) Adapter only

2) Micro Phone Port : To connect Microphone

3) Speaker Port : To connect Speaker

4) Relay Output : Output port with embedded Relay.

5) Sensor Input : Sensor Input port, to be set in Inner Setting and to be used without regard to N/C or N/O

6) RS485 Port : Input / Output Port of RS485

7) Serial Port : To control of Pan/Tilt/Zoom of Camera and connect to PLC or outer Devices (RS232)

8) Video In : Input port to connect with signal output from Camera, VTR, Quad, DVR

9) Video Out : Output of the same video signal that put into the Video Input Port.

10) LAN : LAN Cable port for Internet to connect to Internet

11) Hardware Reset : To initialize basic setting. Push and hold for seconds to start initialization.

① ②

③④ ⑤⑥

⑦

⑧

⑨

⑩

⑪

⑫

2. Installation and Video Check

2.1 Installation

On the assumption that User PC and S-160 Sever is used under static IP, and S-160 is to be directly connected

with User PC or Local Network, the installation procedure is to be ;

Pic. 2―1 Rear View

1) Connect Camera and StreamVIEW with Video Cable (8 of [Pic.2-1]).

2) If connecting a Pan/Tilt Camera for control, connect Cable into RS232 Port (7 of [2-1]) or RS485 Port (6 of

[2-1]).

3) Connect StreamVIEW and PC with LAN Cable (Cross Cable) (10 of [2-1])

4) Turn on Camera and StreamVIEW (Use provided power supply only) (1 of [2-1])

5) Wait about 2 minutes after powering up the StreamVIEW, and then the LINK LED shows that the System

has been booted normally.

2.2 Video Check

Basic network setting value of S-160 is to be ;

9IP Address : 192.168.1.8

9Subnet Mask : 255.255.255.0

9Gateway : 192.168.1.1

To connect S-160 in user’s PC, change the setting value of PC network environment.

⑪

① ②

③④ ⑤⑥

⑦

⑧

⑨

⑩

⑪

Tabla de contenidos

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario