Crown VCA-MC4A Manual de usuario
VCA-MC4A
VCA-MC8
CTs MULTICHANNEL
AMPLIFIER ACCESSSORIES
The Crown® VCA-MC4A and VCA-MC8 are
optional level-control modules for the
Crown CTs multichannel power amplifiers.
The VCA-MC4A is for the CTs 4200, and the
VCA-MC8 is for the CTs 8200.
A VCA-MC module provides independent
remote level control for each channel. 4-pin
removable Phoenix-style barrier connectors
provide the +10VDC control voltage, ground,
and control lines for two amplifier chassis.
Thus, the 4-channel CTs 4200 uses two con-
nectors; the 8-channel CTs 8200 uses four
connectors.
Crown CTs 4200 and 8200 amplifiers can be
supplied with a VCA-MC module already fac-
tory-installed, or your choice of MC modules
can be easily added to the amplifier by any
authorized Crown Service Center. Contact
Crown Technical Support for more details.
Also available are optional wall-mount level
control panels for use the the VCA module: the
1-VCAP and 4-VCAP.
The 1-VCAP is a single-gang panel providing
remote volume control for one or more CTs
amplifier channels. The potentiometer on the
panel is wired directly to one of the VCA con-
nectors on the VCA-MC.
The 4-VCAP is a two-gang panel providing
remote volume control for four or more CTs
amplifier channels. Each potentiometer on the
panel is wired directly to the respective VCA
connector on the VCA-MC.
For more details about the Crown VCA-MC4A
and VCA-MC8, contact Crown Technical Sup-
port at 800-342-6939 or 574-294-8200. Also,
visit the Crown Audio website at www.crown-
audio.com.
Features
• Independent remote level control for each channel
• 4-pin removable Phoenix-style barrier connectors pro-
vide the +10VDC control voltage, ground, and control
lines for two amplifier channels
• Optional wall-mount level control panels for use with
VCA modules: 1-VCAP and 4-VCAP
VCA-MC8 is shown. VCA-MC4 is similar
but with two barrier connectors.
Optional 1-VCAP wall-mount
level control module
Optional 4-VCAP wall-mount
level control module
Crown International
1718 W. Mishawaka Rd.
Elkhart, IN 46517-9439
TEL: 574-294-8200
FAX: 574-294-8FAX
www.crownaudio.com
Crown’s Three-Year, No-Fault, Fully Transferable Warranty
Crown offers a Three-Year, No-Fault, Fully Transferable Warranty for every new Crown amplifier
product—an unsurpassed industry standard. With this unprecedented No-Fault protection, your
new Crown amplifier product is warranted to meet or exceed original specifications for the first
three years of ownership. During this time, if your unit fails, or does not perform to original speci-
fications, it will be repaired or replaced at our expense. About the only things not covered by this
warranty are those losses normally covered by insurance and those caused by intentional abuse.
And the coverage is transferable, should you sell your unit.
See your authorized Crown dealer for full warranty disclosure and details. For customers outside
of the USA, please contact your authorized Crown distributor for warranty information or call
574-294-8200.
7/05 135427-1C
Specifications subject to change without prior notice. Latest
information available at www.crownaudio.com.
Crown and Crown Audio are registered trademarks of Crown
International. Other trademarks are the property of their respective
owners. Printed in U.S.A.
©2005 Crown Audio®, Inc.
Specifications
VCA-MC4A
Pins: VCA, GND, +10V, VCA (x2)
Control Voltage: 0 to +10VDC between GND
and VCA
Weight: 3.6 oz (102 g)
Dimensions:
Gain Module: 5-1/2 in x 2-1/2 in
(14.0 cm x 6.4 cm)
Connector Break-Out: 5-15/16 in x 1-1/2 in
(15 cm x 3.8 cm)
VCA-MC8
Pins: VCA, GND, +10V, VCA (x4)
Control Voltage: 0 to +10VDC between GND
and VCA
Weight: 5.0 oz (142 g)
Dimensions:
Gain Module: 5-1/2 in x 2-1/2 in
(14.0 cm x 6.4 cm)
Connector Break-Out: 5-15/16 in x 1-1/2 in
(15 cm x 3.8 cm)
VCA-MC4A
VCA-MC8
1-VCAP
Pins: VCA, GND, +10V
Weight: 3.0 oz (85 g)
Dimensions: 2-1/2 in x 4-1/2 in
(6.4 cm x 11.4 cm)
4-VCAP
Pins: VCA, GND, +10V (x4)
Weight: 6.5 oz (184 g)
Dimensions: 4-1/2 in x 4-1/2 in
(11.4 cm x 11.4 cm)
Choosing the Right Module
To order accessory modules for your amplifier,
please refer to the model tag (located on the
back panel of the amplifier) for your amplifier’s
specific model number. Then refer to the chart
below to select the correct accessory for your
requirements.
CTs 4200: VCA-MC4
CTs 4200A: VCA-MC4A
CTs 8200: VCA-MC8
Otros manuales para VCA-MC4A
1
Este manual sirve para los siguientes modelos
1
Otros manuales de Accesorios para amplificadores de Crown
