Crosscontrol CCpilot V1000 Manual de usuario

Revision: 1.0

2022-04-01

CCpilot V1000 and V1200

Technical Manual

www.crosscontrol.com

CCpilot V1000/V1200

Revision: 1.0

Technical Manual

2022-04-01

www.crosscontrol.com

1. Introduction

This technical manual provides important information regarding the CCpilot V1000 and V1200

product’s hardware and its basic usage, hereinafter referred to as CCpilot V1000/V1200.

The CCpilot V1000/V1200 are 10” and 12” display computer products featuring an i.MX

8QuadXPlus application processor.

For software and operating system specifics, please see additional documentation.

Revision history

Rev

Date

Author

Comments

PA1 2022-01-03 MLG

Draft

1.0

2022-04-01

FMG

Release version

CCpilot V1000/V1200

Revision: 1.0

Technical Manual

2022-04-01

www.crosscontrol.com

Contents

1. Introduction................................................................................................................................2

Revision history ...............................................................................................................................2

2. Product models .........................................................................................................................4

2.2. Document conventions .......................................................................................................4

2.3. Identification .........................................................................................................................4

2.4. Environmental resistance .....................................................................................................5

3. Product overview.......................................................................................................................6

3.1. Front side view.......................................................................................................................6

3.2. Rear side view .......................................................................................................................7

4. Mounting and handling ............................................................................................................8

4.1. Mounting................................................................................................................................8

4.2. Connecting to power supply ............................................................................................10

4.3. Cable installation ................................................................................................................12

4.4. Special considerations .......................................................................................................13

4.5. Handling and maintenance..............................................................................................13

4.6. Transportation......................................................................................................................14

5. Basic operation........................................................................................................................15

5.1. Turning ON ...........................................................................................................................15

5.2. Turning OFF and suspending .............................................................................................15

5.3. Light sensor ..........................................................................................................................16

5.4. Using the touch screen ......................................................................................................17

5.5. Status notification ...............................................................................................................17

5.6. System related error codes................................................................................................17

5.7. Display related error codes ...............................................................................................18

6. Interface overview ..................................................................................................................20

6.1. Touch screen .......................................................................................................................20

6.2. Light sensor ..........................................................................................................................20

6.3. RGB status LED.....................................................................................................................20

6.4. Buzzer....................................................................................................................................20

6.5. CAN ......................................................................................................................................20

6.6. Ethernet................................................................................................................................21

6.7. USB ........................................................................................................................................21

6.8. Bluetooth and Wi-Fi.............................................................................................................21

7. Connectors ..............................................................................................................................22

7.1. M12 connectors ..................................................................................................................22

7.2. Connector 1 - Power and CAN M12 pinout ....................................................................23

7.3. Connector 2 - CAN M12 pinout ........................................................................................23

7.4. Connector 3 - Ethernet M12 pinout ..................................................................................24

7.5. Connector 4 - USB M12 connector pinout.......................................................................25

7.6. Connector 5 - USB-C...........................................................................................................26

8. Specifications ..........................................................................................................................26

8.1. Technical data....................................................................................................................26

8.2. Environmental specifications.............................................................................................29

CCpilot V1000/V1200

Revision: 1.0

Technical Manual

2022-04-01

www.crosscontrol.com

8.3. EMC specification...............................................................................................................29

8.4. Weight and dimensions......................................................................................................30

Technical support.........................................................................................................................32

Trademarks and terms of use ......................................................................................................33

2. Product models

This documentation is applicable for all CCpilot V1000/V1200 models. These models are:

•CCpilot V1000 2CAN.

•CCpilot V1000 4CAN Wi-Fi and Bluetooth.

•CCpilot V1200 2CAN.

•CCpilot V1200 4CAN Wi-Fi and Bluetooth.

These models share the same level of performance, hardware architecture, TFT, enclosure

and connectors. The PCB is the same for all versions but may be populated differently.

2.1.1. Customized models

The platform enables additional customization of hardware and software. Described herein are

the features included in product models described above. Additional features in customized

models will be documented separately.

Contact CrossControl for customization inquiries.

2.2. Document conventions

This document uses the following conventions:

Description

Appearance

Important information

Differences between product

models

(Exclamation symbol)

(Observe’ symbol)

Text formats used in this document are described in the table below:

Format

Use

Italics

Names, designations, and references

Bolded

Important information

2.3. Identification

Each device has identification labels with serial number, part number and revision which identifies

your unique device. This information is required when communicating with CrossControl regarding

Technical support and Service/Repair needs.

CCpilot V1000/V1200

Revision: 1.0

Technical Manual

2022-04-01

www.crosscontrol.com

Figure 1: Identification labels

2.4. Environmental resistance

The CCpilot V1000/V1200 products has been designed to manage tough environmental

demands. The focus, from design through components selection, has been to provide a

reliable and robust device.

Thorough testing has been performed to ensure compliance to a broad range of applicable

regulatory requirements and to meet user demands of a ruggedized product for machinery

control.

A complete list of the standards to which the product has been tested for compliance can be

found in chapters 8.2 and 8.3.

CCpilot V1000/V1200

Revision: 1.0

Technical Manual

2022-04-01

www.crosscontrol.com

3. Product overview

This chapter contains illustrations of the CCpilot V1000/V1200 showing the location of external

connectors, indicators etc. Connectors are described in more detail in chapter 7. Additional

mechanical information can be found in chapter 8.4.

3.1. Front side view

The devices feature either a 10” or 12” display with projected capacitive (PCAP) touch-sensor.

There is also a light sensor and an RGB status LED in the front. The light sensor enables

automatic dimming of the display and the RGB status LED shows operation modes or fault

indications.

Figure 2: CCpilot V1000/V1200 front side view

Light sensor

RGB status

CCpilot V1000/V1200

Revision: 1.0

Technical Manual

2022-04-01

www.crosscontrol.com

3.2. Rear side view

The rear side contains external connectors of type M12 and USB-C, mounting holes for either

a fastener in accordance with VESA 75 (M6) or custom bracket for panel mounting and a

GORE-TEX®membrane for ventilation.

Depending on exact product model the CCpilot V1000/V1200 product has either three or four

M12 connectors. The M12 connector for CAN channels 2-3 is only mounted on the product

instances holding 4 CAN interfaces.

Figure 3: CCpilot V1000/V1200 rear side view

GORE-TEX membrane,

under mount for added

protection

M12 connector 1

Power and CAN 1, 4

M12 connector 3

Ethernet

M12 connector 2

CAN 2-3

M12 connector 4

USB

USB-C

4 x M6 inserts for VESA75

mount

CCpilot V1000/V1200

Revision: 1.0

Technical Manual

2022-04-01

www.crosscontrol.com

4. Mounting and handling

This chapter contains recommendations for installation, handling and maintenance of the

product.

4.1. Mounting

CCpilot V1000/V1200 supports two different mounting methods, standardized VESA75 or a

panel mount. These two mounting methods are described separately below.

For both fastening methods, use the appropriate 4 pc. M6 button head screw of type MRT

(Torx) The recommended torque for the screws is 3.0-3.5 Nm. Using fluid locker or locking

washers (split ring, toothed lock, etc.) is required for proper mounting. Ensure that the M6

mounting screws are clean and dry before mounting.

Note that the depth of the threaded holes is 12mm. Be careful not to use too long screws which

may damage the device when tightened. It is also very important to use a fastening plate with

holes that are not larger in diameter than 7 mm so that the plate is flush with the threaded

inserts to avoid pulling out the threaded inserts from the unit.

4.1.1. VESA 75 mount

CCpilot V1000/V1200 can be mounted using a RAM mount, i.e. RAM-D-2461U, square base

2.25” ball mount and accessories of choice which allows adjustment of the display’s position

and angle. Screw length should be 16mm.

Figure 4: VESA 75 mount

4.1.2. Panel mount

Alternatively, the device can be mounted in a panel cut-out using a panel mounting bracket

(article number C000154-65)

CCpilot V1000/V1200

Revision: 1.0

Technical Manual

2022-04-01

www.crosscontrol.com

Figure 5: Mounting bracket

The mounting bracket is designed for a panel thickness of 1.5 - 3.0 mm. Panel cut out

dimensions are shown in the figure below. A drawing in DXF-format for precision cutting of

panels is available upon request. Screw length should be 12mm.

Figure 6: Panel cut-out CCpilot V1000

CCpilot V1000/V1200

Revision: 1.0

Technical Manual

2022-04-01

www.crosscontrol.com

Figure 7: Panel cut-out CCpilot V1200

Ensure that CCpilot V1000/V1200 is mounted to a smooth, flat surface. Fastening the unit to

an uneven surface may stress the enclosure, damage the outer flange, or possibly even flex

the circuit board inside, leading to a premature failure.

4.2. Connecting to power supply

This chapter describes how the CCpilot V1000/V1200 is preferably connected to the power

supply of the equipment it is installed in. The principle is the same for vehicular and stationary

installations.

Carefully read through the following sub-chapters. They are critical for designing and adapting

the electrical system of the equipment in which the CCpilot V1000/V1200 is installed.

Connector pinouts are found in chapter 7.

4.2.1. Wire gauge

Wire gauge for the power supply should be dimensioned with respect to the total load current,

the cable length required, and the worst-case voltage drop allowed, considering the minimum

operational voltage of the device.

•Current consumption of the CCpilot V1000/V1200 device is found in chapter 8.1.

•The wire gauge for the power supply is recommended to be at least 0.75 mm2/AWG 18 for

“normal” loads.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Monitor de crosscontrol

crosscontrol

crosscontrol CCpilot VS 12" Manual de usuario

crosscontrol

crosscontrol CCpilot VS 12" Manual

crosscontrol

crosscontrol CCpilot VI Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación

crosscontrol CCpilot V1000 Manual de usuario

Manuales populares de Monitor de otras marcas