Page 2
Operation
Important Note: Scaling and other sediments can damage the internal components of the device. Flush the test connection
water supply free of debris before each use. Always reference the applicable testing standard(s) and check with local codes
and ordinances for amendments or exceptions.
2. Fully close the swivel gate valve and attach it to the discharge side of the body.
6. Use a wrench to fasten all connections securely. No leaks should be present during testing.
test connection fully open, the pressure gauge shows the static outlet pressure.
process until the valve is set correctly and measurements are recorded.
9.
and drain plugs, and post results as required. Follow the VTD’s maintenance instructions when all testing is complete.
Maintenance
•
assembly to freezing temperatures, especially when wet.
•
the optional case to protect the gauges from damage.
•
•
“The Enforcer II” Valve Testing Device“The Enforcer II” Valve Testing Device
User ManualUser Manual Model 8072-V2
