Crisp Solutions UCommand UC-515 Manual de usuario
Universal LCD Remote Control UC-515
With Touchscreen & Learning Function
User’s Guide
TM
Preface
ii
About This User’s Guide
This user’s guide is designed to assist you in setting up your
UCommand UC-515 Universal LCD Remote Control. Information in
this document has been carefully checked for accuracy; however,
no guarantee is given as to the correctness of the contents. The
information contained in this document is subject to change without
notice.
Updates and additional information can be found at our website:
www.crispsolutions.com.
Edition
Second Edition, July 2000
Copyright
2000 by Crisp Solutions LLC. All rights reserved. No part of this
publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means (electronic, mechanical,
photocopying, recording, or otherwise), without the prior written
permission of the publisher.
Trademarks
Trademarks and registered trademarks of products referred to in this
user’s guide are the properties of their respective holders.
UCommand User’s Guide
iii
Radio Frequency Interference
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
•This device may not cause harmful interference
•This device must accept any Interference received,
including interference that may cause undesired operation.
Preface
iv
Table of Contents
Chapter 1 1
Introduction............................................................................... 1
Unpacking UCommand............................................................ 1
UCommand Features .............................................................. 2
Identifying Components........................................................... 3
Figure 1-1: Front and rear view................................................ 3
Chapter 2 5
Getting Started.......................................................................... 5
Power Supply.......................................................................... 5
Figure 2-1: Inserting the batteries ............................................ 5
Battery Low Icon...................................................................... 6
Figure 2-2: The battery low icon .............................................. 6
Power Supply Tips and Precautions ........................................ 6
The LCD.................................................................................. 7
Figure 2-3: Turning the LCD on ............................................... 7
Touch Screen Buttons............................................................. 8
Figure 2-4: LCD Panel Layout.................................................. 9
Chapter 3 11
Operating UCommand............................................................ 11
Before Using the Learning Function....................................... 11
Using the Learning Function.................................................. 12
Figure 3-1: Using the learning eye......................................... 12
Using the Delete Function...................................................... 16
Changing the LCD Layout...................................................... 20
Changing the AUX Device Layout.......................................... 22
Macro Function...................................................................... 22
Adjusting the LCD Backlight .................................................. 29
Turning Off the Beep Signal................................................... 32
Figure 3-2: Turning off the beep signal................................... 32
UCommand User’s Guide
v
Recalling the Original LCD Layout ......................................... 33
Figure 3-3: Recalling the original LCD panel configuration ..... 33
Appendix A 35
UCommand Specifications..................................................... 35
Appendix B 37
Troubleshooting ..................................................................... 37
Chapter 1
INTRODUCTION
Congratulations on the purchase of UCommand UC-515,
the easy to use and configure digital remote control.
UCommand lets you manage all your infrared-controlled
devices, eliminating the need to search for your various
remotes. All you need is the UCommand. This remote
control does it all for you!
UCommand’s main concept is based on a large and user-
friendly touch screen panel. The buttons change
automatically to display the various devices you wish to
control. This unique concept reduces the number of buttons
for each device, which makes it easy to find the function
you want.
UCommand features 8 pre-defined button layouts for TVs,
DSS/Satellite/Cable sources, Tape/Tuner, CD/DVD players,
Surround Sound Amplifiers, LD/VCDs, VCRs, and other
devices. In addition, it has a macro function that allows you
to initiate a chain of up to 25 commands with the touch of a
button.
NOTE: This user’s guide will help you learn how to use all
of the advanced features of UCommand. However, it will
not help explain how to use the devices for which
UCommand will be controlling. Please refer to each
device’s manual for information related to your device.
Unpacking UCommand
After you have unpacked UCommand, check the contents
to make sure the following items are included.
Chapter 1-Introduction
2
•UCommand UC-515, Universal LCD Remote Control
•This User’s Guide
•Reference Card
•Registration Card
If any of the above items are missing or appear damaged,
contact your dealer immediately. Do not throw the shipping
carton away in case you need to ship your UCommand back
to your place of purchase.
UCommand UC-515 Features
This section provides an overview of the key features of
UCommand. For more information on getting the most from
these features, refer to Chapter 2.
•Large touch screen display with automatic backlighting for
visibility in dim lighting
•Adjustable backlight with four levels of ambient light sensitivity
•Extensive, programmable Macro functions: each macro can
store up to 25 commands on any command button
•Offers eight customizable device layers including TV,
DSS/Satellite/Cable, Tape/Tuner, CD/DVD, Amplifier, LD/VCD,
VCR
•Specialized learning function makes mapping and configuring
from other remote controls quick and easy by capturing their
infrared (IR) signal codes.
•No hassle with device codes; learns every IR device
•Long battery life (4 -5 months for typical use) thanks to
intelligent power saving functions
•Settings held in non-volatile flash memory. Keeps your
configuration when batteries finally drain
•No mechanical buttons that can wear out or get dirty
•Beep tone confirmation (can be switched off)
•Elegant design
UCommand User’s Guide
Identifying Components 3
Identifying Components
This section provides an overview of UCommand’s features
and controls. Please refer to the following illustrations to
identify UCommand’s components. Refer to Chapter 3 for a
detailed description on using the LCD panel and controls.
OPEN
IR Port
Point the IR port at
the IR receiver of
the device you want to
operate.
LCD
The LCD panel
enables you to
configure and
operate your
devices by touching
the screen on the
function you want.
Tap the LCD panel
once to power on
the remote.
Battery cover
Remove this cover
to access the
four AAA batteries.
Learning eye
Point your device’s
remote control at
this eye to enable the
remote to learn your
device remote control
functions.
1
1
Figure 1-1: Front and rear view
Chapter 1-Introduction
4
NOTES
Tabla de contenidos
Otros manuales de Control remoto universal de Crisp Solutions
