Crestron Green Light GL-IPAC-SW8 Manual de usuario

GL-IPAC-SW8

Crestron Green Light® Integrated Switching

System

Product Manual

Crestron Electronics, Inc.

The original language version of this document is U.S. English.

All other languages are a translation of the original document.

Regulatory Model:

Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs) under a

limited nonexclusive, nontransferable Software Development Tools License Agreement. Crestron product operating

system software is licensed to Crestron dealers, CSPs, and end-users under a separate End-User License Agreement.

Both of these Agreements can be found on the Crestron website at www.crestron.com/legal/software_license_

agreement.

The product warranty can be found at www.crestron.com/warranty.

The specific patents that cover Crestron products are listed online at patents.crestron.com.

Certain Crestron products contain open source software. For specific information, please visit

www.crestron.com/opensource.

Crestron, the Crestron logo, and Crestron Green Light, are either trademarks or registered trademarks of Crestron

Electronics, Inc. in the United States and/or other countries. UL and the UL logo are either trademarks or registered

trademarks of Underwriters Laboratories, Inc. in the United States and/or other countries. Other trademarks, registered

trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names

or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not

responsible for errors in typography or photography.

Contents

Overview 6

Features 6

Out of the Box Lighting Controls 6

Save Energy 6

Easy Deployment 6

Key Features Include: 7

Specifications 8

Product Specifications 8

Installation 11

Front Panel Controls 11

Wiring Diagram 12

Wiring Guidelines 19

Calculate Power 19

Strip and Tin Wire 20

Add Hubs 20

Configuration 21

Project Settings 22

Panels 23

Changing the Number of External Loads 23

Set External Load IDs 24

Occupancy Sensors 24

Internally Connected Occupancy Sensors 25

Cresnet Connected Occupancy Sensors 25

GLS-SIM Connected Occupancy Sensors 26

Assign an Occupancy Sensor 27

Photo Sensors 29

Photo Sensor Range 29

Lighting Threshold Settings 30

Assign Photo Sensors to Loads 31

Keypads 32

Program Button Function 33

Assign Button Function and Select Loads 33

Remote Keypads 34

Contact Closures 35

Timeclock 36

Time Clock Events 38

Ethernet Settings 39

About 40

Product Manual — Doc. 7389C Contents • iii

Troubleshooting 41

iv • Contents Product Manual — Doc. 7389C

v • Contents Product Manual — Doc. 7389C

Product Manual — Doc. 7389C GL-IPAC-SW8 • 6

Overview

The Crestron GL-IPAC-SW8 switching panel provides internal controls for eight circuits of

switched load and is expandable to support up to 64 circuits of switched load by adding external

panels and switching modules. It features local inputs for sensors and keypads, along with an

LCD user interface where installers or users can set up the system without having to connect to

a computer.

The GL-IPAC-SW8 is perfect for smaller-sized installations, such as retail stores, small office

spaces, parking garages, and service stations, which typically require only on/off switching—

eliminating the need for a larger, more expensive panel. In addition, the GL-IPAC-SW8 can be

easily integrated with Crestron automation solutions for centralized monitoring and remote

control of multiple locations.

Features

Out of the Box Lighting Controls

The GL-IPAC-SW8 comes preconfigured for use as the central control processor for a Crestron

Green Light® Power Switching system. Right out of the box, the GL-IPAC-SW8 affords easy

setup and programming for a complete switching system consisting of up to 64 switched loads,

16 local and two remote keypads, 24 occupancy and photo sensors, and 100 time clock events.

Keypads with as many as 12 buttons each can be programmed easily to control lighting loads

and other functions. Lights can be programmed to turn on and off automatically using the built-

in astronomical time clock. Lighting events may be programmed to occur at specific times or at

an offset from sunrise or sunset. Occupancy sensors and photo sensors may also be

implemented to enable automatic on/off lighting control based on room occupancy and ambient

light levels.

Save Energy

Built-in support for occupancy and photo sensors helps to strike a perfect balance between

daylight harvesting and comfort, reducing energy costs. Automatically turn off lights in

unoccupied areas to allow natural light level in the space to light the area. Crestron GLS sensors

can be placed strategically in each space to maximize the benefits of energy management.

Easy Deployment

Packaged in one metal enclosure, the GL-IPAC-SW8 can be deployed in small spaces, including

plenum ceilings. The surface-mount GL-IPAC-SW8 can be affixed to a wall or ceiling rafter,

cleanly out of sight. Standard wire-entry knockouts are provided.

7 • GL-IPAC-SW8 Product Manual — Doc. 7389C

Key Features Include:

lEight internal circuits for switched loads

lExpandable to control up to 64 circuits of switched load

lSupports 100 to 277 volt applications

l16 amp load rating per channel

lBuilt-in astronomical time clock

lPositive air gap at each output

lPhase-independent channels

lLocal controls for setup, testing, and verification

lLocal and remote override capability

lNon-volatile power failure memory

lEasy access is facilitated from the hinged front cover

lCECTitle 24 2013 Compliant

Product Manual — Doc. 7389C GL-IPAC-SW8 • 8

Specifications

Below are the product specifications for the GL-IPAC-SW8. For a list of available accessories,

visit the GL-IPAC-SW8 product page.

Product Specifications

Load Rating

Switched Channels 8 internal;

Expandable up to 64 by adding external panels and modules

Per Channel 16 Amps @ 120 to 277VAC, 50/60 Hz

Switched Load Types Florescent Ballast, Incandescent, Magnetic Low-Voltage, Electronic Low-

Voltage, Neon/Cold Cathode, High-Intensity Discharge, LED, Motor

Relay Lifetime Resistive rating: 100,000 on/off operations, 50A @ 277VAC;

General rating: 50,000 on/off operations, 16A @ 120/277VAC

Power Requirements

Main Power 100-277V AC, 50/60 Hz, via channel 1 (LINE 1, NEUT)

Available Cresnet Power 15 W at 24VDC

Connectors (Class 1)

NEUT (2) terminal blocks, paralleled, line input neutral

Line 1 - Line 8 (16) terminal blocks, line power inputs;

2 connections per channel, paralleled, allows for easy daisy-chaining;

SW1 - SW8 (8) terminal blocks, switch channels outputs

Connectors (Class 2)

Cresnet (1) 4-pin 3.5 mm terminal block;

A maximum of 10 GLS-SIMs may be connected via the Cresnet® terminal block

for occupancy sensors and for photo sensors;

Up to 20 occupancy sensors may be supported (10 external Cresnet sensors and

10 external, non-system sensors connected to the Cresnet network via GLS-

SIM);

Up to 20 photo sensors may be supported (10 external, non-system sensors

wired directly to a Cresnet occupancy sensor and 10 external, non-system

sensors wired to a GLS-SIM using the Cresnet network)

OVR (1) 2-pin 3.5 mm terminal block, comprising (2) inputs for external contact

closures to trigger the preset Override state

9 • GL-IPAC-SW8 Product Manual — Doc. 7389C

Contact Closures (1) 9-pin 3.5 mm terminal block comprising (8) contact closure inputs and (1)

GND port

Sensor Input 1-4 (1) 6-pin 3.5 mm terminal block comprising (4) sensor inputs for internal,

nonsystem occupancy sensors, (1) +24VDC, and (1) GND port (provides sensors

with power)

Sensor Input 5-8 (1) 6-pin 3.5 mm terminal block comprising (4) sensor inputs for internal,

nonsystem photo sensors, (1) +24VDC, and (1) GND port (provides sensors with

power)

USB (1) USB Type-B console port, for communication with Crestron Toolbox™

software

LAN (1) 8-wire RJ-45 with 2 LED indicators;

10/100BaseT Ethernet port;

Green LED indicates link status;

Yellow LED indicates Ethernet activity

LEDDisplay

Green LCD dot matrix, 128x64 resolution, adjustable LED backlight

Controls and Indicators

▼ and ▲ (2) pushbutton, adjusts menu parameters

ENTER (1) pushbutton, selects underlined item and stores settings

HOME (1) pushbutton, returns to the home page

BACK (1) pushbutton, returns to the previous page

CANCEL (1) pushbutton, cancels current action without saving

HELP (1) pushbutton, opens context-sensitive help screen

Soft Keys (4) pushbuttons for activation of LCD driven functions

PWR (1) Green LED;

Solid illumination indicates line power is applied to NEUT and LINE1

HW-R (1) Recessed miniature push-button for hardware reset (reboots the processor)

SW-R (1) Recessed miniature push-button for software reset (restarts the program)

OVR (1) Red LED and (1) miniature push-button for enabling override mode

ON/OFF ON/OFF: (8) Red LEDs and (8) miniature push-buttons for individual manual

channel activation

Environmental

Temperature 32° to 104°F (0° to 40°C)

Humidity 10% to 90% RH (non-condensing)

Product Manual — Doc. 7389C GL-IPAC-SW8 • 10

Dimensions

Height 12.13 in. (308 mm)

Width 14.13 in. (359 mm)

Depth 4.06 in. (104 mm)

Compliance

ULListed Enclosure

FCC, IC

Otros manuales para Green Light GL-IPAC-SW8

Tabla de contenidos

Otros manuales de Sistema de control de Crestron

Crestron

Crestron FlipTop FT2 Series Manual de usuario

Crestron

Crestron RMC3 Guía de inicio rápido

Crestron

Crestron 4 Series Manual de usuario

Crestron

Crestron 4-Series AV4 Manual de usuario

Crestron

Crestron 4K DigitalMedia 3-Series Manual de usuario

Crestron

Crestron MC2E Manual de usuario

Crestron

Crestron 4 Series Manual de usuario

Crestron

Crestron DM-RMC-4KZ-100-C Manual de usuario

Crestron

Crestron PRO2 Manual de usuario

Crestron

Crestron SmartPresenter SP-1 Manual de usuario

Crestron

Crestron FlipTop FT2-202-ELEC Series Manual de usuario

Crestron

Crestron CP2 Manual de usuario

Crestron

Crestron FlipTop FT2 Series Manual de usuario

Crestron

Crestron FlipTop FT2 Series Manual de usuario

Crestron

Crestron 3 Series Manual de usuario

Crestron

Crestron MC2W Manual de usuario

Crestron

Crestron IRP2 Manual de usuario

Crestron

Crestron CP4 Manual de usuario

Crestron

Crestron PAC2 Manual de usuario

Crestron

Crestron 4 Series Manual de usuario

Crestron

Crestron 3 Series Manual del propietario

Crestron

Crestron CP4-R Manual de usuario

Crestron

Crestron Prodigy PMC2 Manual de usuario

Crestron

Crestron FlipTop FT2 Series Manual de usuario

Manuales populares de Sistema de control de otras marcas

Pentair Pool Products

Pentair Pool Products Compool Manual de usuario

ComfortNET

ComfortNET CTK04 Manual de usuario

Fireye

Fireye InSight II 95DSS3 Manual de usuario

CAME

CAME G3000 Manual de usuario

Idemia

Idemia MorphoAccess VP MD Manual de usuario

Axis

Axis P1445-LE-3 Manual de usuario

HEIDENHAIN

HEIDENHAIN TNC 150 B Manual de usuario

CNC-Step

CNC-Step High-Z T-Series Manual de usuario

Doosan

Doosan DVF Series Manual de usuario

Honeywell

Honeywell KAP 140 Manual de usuario

Honeywell

Honeywell vk41 series Manual de usuario

AirBench

AirBench FPW Guía de instalación

Cypress

Cypress HHR-3160 Manual de usuario

CAME

CAME GLT40AOS Manual de usuario

Zonex

Zonex GEN II -VVT Guía del usuario

Altronics

Altronics K 9650 Manual de usuario

micro-trak

micro-trak RoadMaster Manual de usuario

micro-trak

micro-trak Calc-An-Acre II Manual de usuario