Creative Playthings Playtime PS18EAS Manual de usuario

MODEL PS18EAS

ASSEMBLY MANUAL

If you have problems or questions about your Creative Playthings play set,

DO NOT CALL THE RETAILER.

Contact Creative Playthings Customer Service at 1-800-598-4997 or

[email protected]

Please read the owner’s manual before the

assembly of your Play Set. it provides additional

information on the care and use of your Play Set.

You must carefully read the entire instruction man-

ual before proceeding with the assembly or use

of your new Play Set.

Creative Playthings takes great care to design its

products with your child’s safety in mind. How-

ever, only with careful supervision and proper

safety instructions, can you be assured of safe

play time on any product designed for children.

Save these instructions for reference in case you

need to contact customer service.

This product is intended for single

family home/residential use only and

not intended for use in any public

setting. Placement in any public

setting constitutes a misuse of this

product.

All hardware on this set is specially coated

for corrosion resistance.

If non-Creative Playthings hardware is used,

it must be galvanized or stainless steel.

™

MODEL PS18EAS

19862-700 Rev A (07-20) Page 2

PLAY SET SAFETY

Observing the following statements & warnings reduces the likelihood of serious or fatal injury:

• Children should use equipment only in its intended manner.

• Children should not wear loose or stringed clothing while using playground equipment.

• Children should not play on equipment in wet weather conditions due to potentially slippery surfaces.

• Children should NOT walk too closely in front of, behind, or between moving swings and trapezes.

• Children should NOT swing empty swing seats.

• Children should NOT jump off swings and/or trapeze while they are in motion.

• Children should NOT twist swing chains because this will reduce the strength of the chains.

• Children should sit in the center of the swings with their full weight on the seats.

• Children should NOT be on the top surface of the swing beam.

• Children should NOT use the equipment in a manner other than intended.

• Children should NOT get off the equipment while it is in motion.

• On-site adult supervision is required at all times for children of all ages.

• Until assembly is complete, DO NOT let your children use the Play Set.

• Never fasten anything not approved by Creative Playthings to your Play Set. Accessories or items not ap-

proved by Creative Playthings include; Dog runs, clothes lines, electrical devices, or bird feeders etc.

• Suspended ropes, chains, and cables must be secured at both ends.

• Suspended ropes, chains, and cables must not be capable of looping back on themselves.

• Do not allow more than 120 lbs. on Single occupancy swing accessories such as the Sling Swing and Trapeze.

• Do NOT allow more than 175 lbs. on multiple use swing accessories such as the Back-to-Back Plastic Glider.

• Do NOT allow more children on the Play Set than can simultaneously use all the swing stations at one time.

• Children MUST NEVER wear bicycle helmets while playing on the play-set.

Assembly Safety:

• Adult assembly required

• Face slide away from the sun.

• Keep the work area clean and clear of obstructions.

• Children should stay out of the work area until the safe play area is cleared of obstacles, the Play Set has been

completely assembled, all hardware has been tightened and checked, and all tools have been picked up.

• Keep children off the Play Set until it has been completely assembled.

• Parts of the assembly process may require help from another competent adult.

• Do not stand on the platform until the Play Set has been completely assembled, use a step ladder if you can

not reach high enough.

• Follow the manufacturers' safety recommendations for the tools and equipment you use.

• Avoid assembling your Play Set in poor weather conditions.

• Wear proper clothing and safety equipment (safety glasses, boots, and gloves) while assembling your Play Set.

FOR SAFETY SAKE, PLEASE TAKE TIME TO READ ALL INSTRUCTIONS COMPLETELY AND

CAUTION YOUR CHILDREN APPROPRIATELY.

MODEL PS18EAS

19862-700 Rev A (07-20)

SAFE PLAY AREA

SELECTING THE CORRECT LOCATION FOR YOUR PLAY PRODUCT IS IMPORTANT FOR

YOUR CHILDREN’S SAFETY AND THE PRODUCT’S LONGEVITY.

Play Set Dimensions:

• The MODEL PS18EAS Play Set has ground dimensions of 14'-10" x 12'-4".

• The MODEL PS18EAS Play Set requires a level ground surface of 26'-10" x 29'-0" for a Safe Play Area.

• Additional accessories may increase the size of the Safe Play Area.

• The maximum fall height for your MODEL PS18EAS is 87" as measured from the top of the swing beam.

Safe Play Area:

• The Safe Play Area refers to a zone extending 6' (2 meters) beyond the Play Set on all sides, including the slide

and the space above the Play Set. Because children may deliberately jump from a moving swing, the Safe Play

Area must be extended to 14' (4.27 meters) in front of and behind a swinging Accessory.

• The ground surface must be level. Installing your Play Set on sloping ground can cause it to lean or “rack”.

This leaning puts additional stress on all connections and joints and in time will cause those connections to

loosen and fail.

• The Safe Play Area must be free of all structures, landscaping, trees and branches, rocks, wires, and other

obstacles to safe play. Children can be seriously injured running, or swinging into these obstacles.

• Remove all tripping hazards from the Safe Play Area. Tripping hazards include; roots, stumps, rocks, landscap-

ing, sprinkler heads, railroad ties, plumbing and electrical connections.

• Do not install your Play Set over concrete, gravel, asphalt, packed earth, or any other hard surface. The follow-

ing is a list of recommended ground covers from the Consumer Product Safety Commission.

RECOMMENDED GROUND COVER

Suggested Material Uncompressed Depth

Double Shredded Bark Mulch 9"

Uniform Wood Chips 12"

Fine Gravel 12"

Fine Sand 12"

• Any edging used to contain the ground cover must be beyond the Safe Play Area. (i.e. Landscape Timbers)

A FALL ONTO A HARD SURFACE COULD RESULT IN SERIOUS

INJURY.

Safe play area using

recommended ground cover.

Whichever is greater

Landscape Timbers 6' from

play structure.

(2 M)

14'

(4.27 M)

14'

(4.27 M)

MODEL PS18EAS

19862-700 Rev A (07-20) Page 4

HARDWARE BAG CONTENTS

50568-701 PT Hardware

89 17001-104 Weld Nut 1/4"

12 12002-203 Flat Washer 8MM

112 12002-205 Flat Washer 1/4"

85 12017-205 Lock Washer 1/4"

8 17120-502 Self-Drill Screw #10 x 1-1/2"

8 17003-409 Hex Bolt 1/4 x 1"

16 17003-609 Hex Bolt 1/4 x 1-1/2"

15 17003-809 Hex Bolt 1/4 x 2"

12 17003-1209 Hex Bolt 1/4 x 3"

18 17003-1409 Hex Bolt 1/4 x 3-1/2"

12 17003-1609 Hex Bolt 1/4 x 4"

4 17003-1809 Hex Bolt 1/4 x 4-1/2"

ASSEMBLY HARDWARE:

More hardware is included than is required for assembly.

1/4 x 1" Hex Bolt

1/4 x 1" Truss Head Bolt

1/4 x 1-1/2" Hex Bolt

1/4 x 2-1/2" Hex Bolt

1/4 x 3-1/2" Hex Bolt

1/4 x 4-1/2" Hex Bolt

1/4 x 2" Hex Bolt

1/4 x 3" Hex Bolt

1/4 x 4" Hex Bolt

Illustrations are representative of hardware.

Slight variation of appearance may occur.

1/4" Flat Washer 8mm Flat

Washer

#10 x 1-1/2" Self-Drill Screw

#8 x 1-1/4" Screw

#10 x 1-5/8" Screw

#10 x 2-1/2" Screw

#10 x 2" Screw

1/4 x 1-1/2" Lag Screw

1/4 x 2" Lag Screw

1/4 x 3" Lag Screw

1/4 x 3-1/2" Lag Screw

1/4" Lock

Washer

Access. Bracket

(Not to Scale)

1/4" Weld

Nut

3 17119-409 Truss Head Bolt 1/4 x 1"

2 17036-601 Lag Screw 1/4 x 1-1/2"

31 17036-801 Lag Screw 1/4 x 2"

6 17036-1201 Lag Screw 1/4 x 3"

2 17036-1401 Lag Screw 1/4 x 3-1/2"

4 14161-400 Access Bracket, Green

50568-702 PT Screws

60 17025-104 Screw #8 x 1-1/4"

126 17020-115 Screw #10 x 1-5/8"

44 17020-107 Screw #10 x 2"

4 17020-113 Screw #10 x 2-1/2"

MODEL PS18EAS

19862-700 Rev A (07-20)

PRE ASSEMBLY INFORMATION

CREATIVE PLAYTHINGS PLAY SETS USE A FEW STANDARD CONNECTIONS.

BECOMING FAMILIAR WITH THESE CONNECTIONS WILL SIMPLIFY ASSEMBLY AND

INSURE A SAFER PLAY PRODUCT FOR YOUR CHILDREN.

Hex Bolt & Weld Nut Assembly Procedure:

Assembly Layout:

Align the holes in the parts to be fastened. Start

preliminary tightening of bolt into weld nut by

hand. Tighten each bolt with a wrench until the

lock washer is fully compressed between the

head of the bolt and the at washer.

Correct Assembly:

Bolt has been screwed securely into weld nut

and the connection is tight. Check connec-

tions periodically for tightness during the life

of the Play Set . Do not over tighten.

Incorrect Assembly:

If during assembly or maintenance the bolt pro-

trudes 1/8" past the weld nut, use additional at

washers, call customer service or replace the

bolt at a local hardware store. You may be over-

tightening or using the wrong size bolt.

Failure to replace this bolt with a shorter one

could result in serious injury.

Typical Installation - Lag Screws:

• Pilot drill with the appropriate

diameter drill bit and then use

a socket to tighten.

• DO NOT over tighten

Typical Installation - Wood Screws:

• Use an electric drill or screw gun to drive screws.

• Drill 1/8" pilot holes where required.

• We recommend that you lubricate the

threads of the screws with beeswax or

soap to ease installation and minimize

breaking screws.

• It is very important to make cer-

tain that the tops of all screws are

ush with the surface of the wood

and there are no protruding sharp

edges.

Lag Screw

Flat Washer

Hex Bolt

Lock Washer

Flat Washer

Weld Nut

MODEL PS18EAS

19862-700 Rev A (07-20) Page 6

PLAY SET VIEW

60081-102 Playtime Swing Beam

AA934-204 2 Swings, 1 Trapeze*

(2 Sling Swings & 1 Ring Trapeze)

8515-202 8 Ft. Wave Slide, Green

Items Packaged Separately:

*Alternative swing features may

be included with your set. Use the

instructions packed with the swing

equipment for assembly.

MODEL PS18EAS

19862-700 Rev A (07-20)

COMPONENT VIEW

X 9 33953-102 Deck Board 5/4 x 6 x 41-1/2"

Y 3 33954-102 Narrow Deck Board 5/4 x 4 x 38-5/8"

Z 2 33956-102 End Joist 5/4 x 6 x 22"

AA 1 33972-102 Ladder Slat 1 x 4 x 15-3/4"

AB 1 35664-102 Lower Wall Supp. 5/4 x 4 x 59-1/2"

AC 1 35665-102 Short Wall Supp. 5/4 x 4 x 23-1/4"

AD 12 33745-402 Roof Board 1 x 6 x 39-1/2"

AE 4 14202-400 1" Dia. X 15" Rung, Green

AF 2 32526-102 Climber Upright 2 x 3 x 52-3/4"

AG 12 33741-102 Short Wall Slat 1 x 4 x 19-1/2"

AH 5 33920-102 Rock Board 5/4 x 6 x 27"

AI* 2 33923-102 Swing Mount 2 x 3 x 34"

AJ 1 33924-102 Safety Rail 2 x 3 x 59-3/8"

AK 6 33962-102 Narrow Wall Slat 1 x 4 x 24-1/2"

AL 2 33963-102 Entrance Slat 5/4 x 6 x 24-1/2"

AM 1 35440-102 Rock & Rope Board 5/4 x 6 x 27"

AN 5 35449-102 Spacer Board 5/4 x 4 x 27"

AO 3 15034-100 Hand Grips

AP 1 18008-138 Climbing Rope

AQ* 5 36515-102 Ground Stake

AR 1 50428-400 Climbing Rocks (6)

AS 1 50469-100 Small CP Name Plate Pack

AT 1 8515-202 8 Ft. Wave Slide, Green

A 4 32561-102 Angle Brace 2 x 3 x 17-1/4"

B 2 35663-102 Mid Post 2 x 4 x 32-1/2"

C 1 33760-102 Platform Right 2 x 4 x 59-3/8"

D* 1 33761-102 Platform Left 2 x 4 x 59-3/8"

E 2 33949-102 Sandbox End 5/4 x 6 x 41-1/4"

F 2 33950-102 Sandbox Side 5/4 x 6 x 59-1/2"

G 1 33951-102 Platform Front 5/4 x 6 x 41-1/2"

H* 1 33952-102 Platform Back 5/4 x 6 x 41-1/2"

I 1 33955-102 End Support 5/4 x 6 x 41-1/2"

J 1 33968-102 Front Arch 5/4 x 6 x 41-1/2"

K 1 35441-102 Left Wall Support 5/4 x 6 x 59-1/2"

L 1 35442-102 Right Top Support 5/4 x 6 x 59-1/2"

M 4 35443-102 Roof Upright 2 x 4 x 20-3/4"

N 1 40653-102 Post, Back Left

O 1 40654-102 Post, Back Right

P 1 40655-102 Post, Front Left

Q 1 40656-102 Post, Front Right

1 50568-701 PT Hardware Bag

1 50568-702 PT Screw Bag

1 50540-304 Instruction Pack, Eastport

R 1 33702-102 Ladder Rail Left 2 x 3 x 47-1/2"

S 1 33703-102 Ladder Rail Right 2 x 3 x 47-1/2"

T* 1 33732-102 Stringer 2 x 3 x 59-1/2"

U* 1 33742-102 Ceiling Joist 1 x 4 x 14-5/8"

V 6 33744-102 Rafter 2 x 3 x 31"

W 1 33922-102 Rock Wall Mount 5/4 x 6 x 39-1/2"

Take inventory of all parts, making sure nothing is missing or defec-

tive. If you nd that parts are missing or defective call the Creative

Playthings Customer Service Department at 1-800-598-4997.

BOX 2 (CONT'D)

BOX 2 - 60083-342

BOX 3 - 60083-343

* Not marked on Play Set View page.

BOX 1 - 60083-341

MODEL PS18EAS

19862-700 Rev A (07-20) Page 8

MAINTENANCE INSTRUCTIONS

YOUR CREATIVE PLAYTHINGS PLAY SET IS STAINED AT OUR FACTORY.

STAINING IS NOT NEEDED AT THE TIME OF INITIAL ASSEMBLY.

Re-staining Information:

• Pigmented, exterior, water repellent stains are recommended and will provide an excellent barrier against moisture

without hiding the natural wood grain or leaving a lm that may later crack or peel.

• We recommend that you apply stain according to the instructions and precautions recommended by the stain manufacturer.

• It should take three or more quarts to cover your set.

• Contact your local dealer or call Creative Playthings for our staining products.

• All rungs are pre-nished at the factory and do not require any nishing at the time of initial assembly.

• Do not paint, or varnish rungs or steps.

• Avoid using nishes that create slippery surfaces.

Maintenance:

• Wooden playground equipment will last for years with proper maintenance. Maintenance of the Play Set nish will vary

depending on weather and climate.

• As a safety precaution, check all hardware, such as nuts and bolts, for tightness twice a month during use and at the

beginning of each play season. Tighten as required and specied in these instructions. Do not over-tighten.

• Check structure twice monthly during usage for any evidence of deterioration. If upon inspection, hardware has sharp edges,

rusted or structural pieces have signs of premature failure; replace them through Creative Playthings Customer Service.

• Oil all metallic moving parts monthly during the usage season.

• The swings, trapeze, tent, rope ladders, and any other removable plastic accessories should be removed and taken

indoors when outside temperatures drop below 32° F (0° C).

• Wood will expand and contract as it adjusts to temperature changes and varying moisture conditions. Checks or cracks

are a natural characteristic of all wood and will not affect the strength or durability of the wooden components.

• To maintain the nish of your set, a light sanding and an application of an exterior stain will repair scratches and prevent

wood from aging prematurely.

• Finishes applied to ladder rungs must not create a slippery surface. Never varnish.

• The wood parts of your Play Set should never be disposed of by burning.

• Dispose of all parts so as not to create a hazard.

• "Check all coverings for bolts and sharp edges and replace when required."

• "Check swing seats, chains, ropes, and other means of of attachments for evidence of deterioration". Replace through

Creative Playthings Customer Service.

• Twice a month during play season rake and check depth of loose ll protective surfacing materials to prevent compac-

tion and to maintain appropriate depth. Replace as necessary.

Tools & Materials Suggested for Finishing & Assembly:

• Claw Hammer

• Carpenter’s Level

• Box Wrench or Sockets (7/16" & 1/2")

• Electric Drill

• 1/8", 3/16", 5/16" diameter Drill Bits

• Screwdriver or driver drill (Medium Phillips)

• Locking Pliers

• 10 ft. Tape Measure

• Framing Square

• 6 ft. Step Ladder

MODEL PS18EAS

19862-700 Rev A (07-20)

ASSEMBLY INSTRUCTIONS

STEP 1 — Assemble Posts:

Locate Back Left Post (N), Back Right Post (O), Front Left

Post (P), and Front Right Post (Q).

Secure each post using two 1/4 x 3" Hex Bolt Assemblies

through the three central holes as shown at left. If the tip of

a Hex Bolt protrudes, add a second Flat Washer next to the

rst.

1) These holes are

higher on back posts.

3) These holes face

opposite on the left

& right front posts

Note orientation

of holes

2) No holes here

on Back Right Post

Hint: The posts can be difcult to tell apart. There are three

clues at left.

1) The holes for the Platform Ends are higher on the back

Posts.

2) There are no holes for a Lower Wall Support on the Back

Right Post.

3) Look at the holes on the narrow edge of the post to tell the

Left Front Post from the Right Front Post.

STEP 2 — Front of Tower:

Fasten one Sandbox End (E) to the front of the Front Left

Post (P) and Front Right Post (Q) as shown. Use 1/4 x 4"

Hex Bolt Assemblies in the top holes and 1/4" x 2" Lag

Screws with 1/4" Flat Washers in the bottom holes.

Repeat the process with the Platform Front (G) and Front

Arch (J). Align the hole at the center of the Platform Front

closer to the upper end of the tower.

Front of

tower

The posts are shown in the positions

they will be in the nal assembly.

The parts required to start assembly are in box 1, subse-

quent parts are in box 2 and box 3.

Hex Bolt Assembly:

Throughout this guide a Hex Bolt Assembly consists of one Hex

Bolt, one Lock Washer, one Flat Washer and one Weld Nut.

1/4 x 4" Hex Bolts in

top holes, 1/4 x 2" Lag

Screws in bottom holes.

MODEL PS18EAS

19862-700 Rev A (07-20) Page 10

ASSEMBLY INSTRUCTIONS

STEP 4 — Left Sandbox Side:

Arrange the back tower assembly and front tower assembly

next to each other on edge as shown at right.

Fasten one Sandbox Side (F) to the Front Left and Back Left

Posts as shown at right. Use 1/4 x 3-1/2" Hex Bolt Assemblies

in the top holes and 1/4" x 2" Lag Screws with 1/4" Flat

Washers in the bottom holes.

STEP 5 — Left Platform Side:

Fasten the Platform Left (D) to the Back Left Post and Front

Left Post in the orientation shown using 1/4 x 3" Hex Bolt As-

semblies. Note the hole positions along the board.

1/4 x 4" Hex Bolts in

top holes, 1/4 x 2" Lag

Screws in bottom holes.

STEP 3 — Back of Tower:

Fasten one Sandbox End (E) to the front of the Back Left

Post (N) and Back Right Post (O) as shown. Use 1/4 x 4"

Hex Bolt Assemblies in the top holes and 1/4" x 2" Lag

Screws with 1/4" Flat Washers in the bottom holes.

Repeat the process with the Platform Back (H) and End

Support (I). Align the hole circled in the illustration closer

to the bottom end of the tower.

1/4 x 3-1/2" Hex Bolts in

top holes, 1/4 x 2" Lag

Screws in bottom holes.

Back of

tower

Front of

tower

1/4 x 3" Hex Bolts.

Back of

tower

Front of

tower

Note orientation

of holes

Otros manuales para Playtime PS18EAS

Tabla de contenidos

Otros manuales de Juegos y equipos de juegos infantiles de Creative Playthings

Creative Playthings

Creative Playthings Lexington Premium Pack 9 Manual de usuario

Creative Playthings

Creative Playthings Lexington Premium Pack 16 Manual de usuario

Creative Playthings

Creative Playthings NORTHBRIDGE WITH TENT Manual de usuario

Creative Playthings

Creative Playthings Lexington Premium Pack 18 Manual de usuario

Creative Playthings

Creative Playthings YORKTOWN Manual de usuario

Creative Playthings

Creative Playthings Clarkdale 1 Manual de usuario

Creative Playthings

Creative Playthings Bridgehampton Premium Pack 6 Manual de usuario

Creative Playthings

Creative Playthings LEXINGTON PLAY WALLS SC 909-800Q Manual de usuario

Creative Playthings

Creative Playthings FUNTIME swing sets Manual de usuario

Creative Playthings

Creative Playthings 63081-102 Manual de usuario

Creative Playthings

Creative Playthings Ridgefield Porch Play Floor Manual de usuario

Creative Playthings

Creative Playthings Playtime swing sets 60081-102 Manual de usuario

Creative Playthings

Creative Playthings Ridgefield Premium Pack 6 Manual de usuario

Creative Playthings

Creative Playthings WILLIAMSBURG PLAY FLOOR SC 908-800Q Manual de usuario

Creative Playthings

Creative Playthings WILL9WPP11 Manual de usuario

Creative Playthings

Creative Playthings Playtime PS10CLASB Manual de usuario

Creative Playthings

Creative Playthings Ridgefield Premium Pack 8 Manual de usuario

Creative Playthings

Creative Playthings WILL9WPP10 Manual de usuario

Creative Playthings

Creative Playthings 63082-102 Manual de usuario

Creative Playthings

Creative Playthings 63080-101 Manual de usuario

Creative Playthings

Creative Playthings Williamsburg Manual de usuario

Creative Playthings

Creative Playthings Lexington Premium Pack 13 Manual de usuario

Creative Playthings

Creative Playthings AH 201-102Q Manual de usuario

Creative Playthings

Creative Playthings Manchester Fun Deck Manual de usuario

Manuales populares de Juegos y equipos de juegos infantiles de otras marcas

Ledon

Ledon 302040 Manual de usuario

FUNormous

FUNormous Disney Junior MICKEY MOUSE Manual de usuario

b4Adventure

b4Adventure Slackers TREEZONE ADVENTURE THREE HOUSE Manual de usuario

PoolMaster

PoolMaster 72775 Manual de usuario

Palmako

Palmako 4743142009857 Manual del instalador

BOERPLAY

BOERPLAY PSTE000.019 Manual de usuario

MGA Entertainment

MGA Entertainment Little Tikes Dunk'n Toss Bouncer Guía del usuario

stilum

stilum Erika Manual de usuario

Costway

Costway NP10816 Manual de usuario

Trigano

Trigano VABI Manual de usuario

Outward

Outward OUT116 Manual de usuario

GALOPIN

GALOPIN ARC02 Manual de usuario

stilum

stilum levis Especificaciones técnicas

Ledon

Ledon BASIC Bai LB012 Manual de usuario

BOERPLAY

BOERPLAY PSTE115.002 Manual de usuario

Europlay

Europlay S306 Manual de programación

SportsPlay Equipment

SportsPlay Equipment 361-509H Manual de usuario

Ledon

Ledon 302250 Manual de usuario