6
Audio Connections
In order to hear the PRO-12 ASB, connect its
stereo outputs to the left / right inputs of a mixer,
a computer sound card or a HiFi system. You
can also process external signals by plugging
anaudiosoundsourceinto your PRO-12 ASB's
input.
Power Switch
This is rather obvious, but in order to activate the
PRO-12 ASB please turn the power switch on!
USB Connections and driver installation (Windows XP)
An alternative to using MIDI to connect your PRO-12 ASB to a
computer is to use the built-in USB interface. On a PC, this requires
WindowsXPwithServicePack2;theMacversionsupportsOS10.4.
After connecting the PRO-12 to a computer, Windows will
automaticallyrecognizethePRO-12
ASB as an audio USB instrument.
No extra drivers are required - you
can start playing right away! After
starting your sequencer program
(shown here: Cubase SX), you can
usetheUSBaudioinstrumentdriver
as a MIDI port. Once in a while,
under older versions of Windows XP (before Service Pack 2), the
USB port will not re-appear on screen after disconnecting the PRO-
12 ASB. In this case, please reboot Windows XP. After rebooting,
your USB port should appear again.
Installation of the Remote Software
To install the Remote Software supplied with the PRO-12 ASB on
your PC, please put the CD-ROM labelled ' PRO-12 ASB' into the
CD-R drive of your computer. The 'Install dialogue' should then
automatically appear on your screen. (If you have de-activated the
automaticstartfunctionofyourCD-Rdrive,pleasestarttheinstallation
by double-clicking the file 'setup.exe' on the CD.) On the first page,
pleasechoosethe language you'dliketousefor theinstallprocedure
and then confirm your choice by pressing the 'Next' button.
