8.Other functions
L or R
Connect to new devices
When the headphone is on, press and hold the LOGO button on
the left headphone for 2 seconds, and wait the indicator to ash
quickly, which means that it has entered the Pairing and Search
mode. At this time, select and connect to "Crazybaby Air 1S" on
the Bluetooth settings interface of the new device.
Pairing left and right headphones
When the headphones are turned on, keep the connection active.
When the left and right headphone lights are on and stable,
double press the left and right headphone LOGO buttons. The
light quickly ashes 3 times and then begins to ash slowly,
indicating that the left and right headphones have entered the
pairing mode. When the light ashes twice per 5 seconds, it
means that the matching is successful.
7. Single-ear mode
When only one headphone is being used
Turn on the headphone to be used, and make sure that the other
is OFF. Press and hold the LOGO button on the headphone for 2
seconds until the indicator light starts to ash. Select and connect
Crazybaby Air 1S/Crazybaby Air 1S (R) on the Bluetooth
connection interface of the mobile phone.
・
When there is an incoming call, press the button on the
headphone once to answer the call.
・ When you are on a call, press the button once to hang up.
・ Quickly press the button on the headphone twice to activate
the Voice Assistant.
・ In the music mode, press the headphone button once to
pause, and then press again to continue.
Hold for 2s
Crazybaby Air 1S (R)
MY DEVICES
BluetoothSettings
Bluetooth
Reset to factory settings
When the headphone is o, press and hold the LOGO button on
the left headphone for more than 6 seconds. The circle light will
turn red and quickly ash twice. Then the factory settings have
been restored.
