Craftsman 320.16495 Manual de usuario

Operator's Manual

MOBILE BASE

Model No. 320.16495

_WARNING: To reduce the risk of injury,

the user must read and understand the

Operator's Manual before using this product.

_WARNING: To reduce the risk of injury,

the user must always read and follow all

instructions in the bench top tool

operating manual before mounting

the tool to this stand.

• WARRANTY

• SAFETY

• ASSEMBLY

• OPERATION

• MAINTENANCE

• ESPANOL

Sears Brands Management Corporation, Hoffrnan Estates,

IL 60179 U.S.A.

www, craftsman,com

Warranty Page 2

Safety Symbols Pages 4-5

Safety Instructions Page 6

Description Page 7

Assembly Pages 8-9

Operation Pages 10-13

Maintenance Page 14

Parts List Pages 15-16

CRAFTSMAN ONE YEAR FULL WARRANTY

FOR ONE YEAR from the date of purchase, this product is warranted

against any defects in material or workmanship. With proof of purchase,

defective product will be replaced free of charge.

For warranty coverage details to obtain free replacement, visit the web

site: www.craftsman.com

This warranty is void if this product is ever used while providing commercial

services or if rented to another person.

This warranty gives you specific legal rights, and you may also have other

rights which vary from state to state.

Sears Brands Management Corporation, Hoffman Estates, IL 60179

This mobile base has many features for making its use more pleasant and

enjoyable. Safety, performance, and dependability have been given top priority

in the design of this product making it easy to maintain and operate.

SAVE THESE iNSTRUCTiONS!

READ ALL iNSTRUCTiONS!

Page 2 16495 ManuaLRevised_12 0509

_,WARNING: Some dust created by power sanding, sawing, grinding, drilling

and other construction activities contains chemicals known to the state of

California to cause cancer, birth defects or other reproductive harm. Some

examples of these chemicals are:

• Lead from lead-based paints,

Crystalline silica from bricks and cement and other masonry products, and

Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type

of work. To reduce your exposure to these chemical: work in a well ventilated

area, and work with approved safety equipment, such as dust masks that are

specially designed to filter out microscopic particles.

The purpose of safety symbols is to attract your attention to possible dangers.

The safety symbols and the explanations with them deserve your careful

attention and understanding. The symbol warnings do not, by themselves,

eliminate any danger. The instructions and warnings they give are no substitutes

for proper accident prevention measures.

16495 Manual_Revised_12 0509 Page 3

,_ WARNING: Be sure to read and understand all safety instructions in this

Operator's Manual, including all safety alert symbols such as "DANGER",

"WARNING", and "CAUTION" before using this tool. Failure to following

all instructions listed below may result in electric shock, fire, and/or serious

personal injury.

SYMBOL MEANING

SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION. May

be used in conjunction with other symbols or pictographs.

DANGER: Indicates an imminently hazardous situation, which, if not

avoided, will result in death or serious injury.

_, WARNING: Indicates a potentially hazardous situation, which, if not avoided,

could result in death or serious injury.

_, CAUTION: Indicates a potentially hazardous situation, which, if not avoided,

could result in minor or moderate injury.

Damage Prevention and Information Messages

These inform the user of important information and/or instructions that could

lead to equipment or other property damage if they are not followed. Each

message is preceded by the word "NOTICE," as in the example below:

NOTICE: Equipment and/or property damage may result if these instructions are

not followed.

_WARNING: To ensure safety and reliability, all repairs should be performed

by a qualified service technician.

_IL WARNING: The operation of any power tools can result in

foreign objects being thrown into your eyes, which can result

in severe eye damage. Before beginning power tool operation,

always wear safety goggles or safety glasses with side shield

and a full face shield when needed. We recommend a Wide

Vision Safety Mask for use over eyeglasses or standard safety

glasses with side shields. Always use eye protection which is

marked to comply with ANSI Z87.1.

Page 4 16495 Manual_Revised_12 0509

SAVE THESE iNSTRUCTiONS

Some of the following symbols may be used on this tool. Please study them

and learn their meaning. Proper interpretation of these symbols will allow you to

operate the tool better and more safely.

SYMBOL NAME DESIGNATION/EXPLANATION

V Volts Voltage

A Amperes Current

Hz Hertz Frequency (cycles per second)

W Watt Power

min Minutes Time

Alternating Current Type of current

===== Direct Current Type or a characteristic of current

n O No Load Speed Rotational speed, at no load

] Class II Construction Double=insulated construction

.../min Per Minute Revolutions, strokes, surface speed,

orbits, etc., per minute

Wet Conditions Alert Do not expose to rain or use in damp

locations.

_! To reduce the risk of injury, user must

Read The Operator's Manual read and understand operator's manual

before using this product.

O Always wear safety goggles or safety

Eye Protection glasses with side shields and a full face

shield when operating this product.

_1_ Alert Precautions that involve

Safety your safety.

Failure to keep your hands away from the

No=Hands Symbol blade will result in serious personal injury.

No=Hands Failure to keep your hands away from the

Symbol blade will result in serious personal injury.

Failure to keep your hands away from the

No=Hands Symbol blade will result in serious personal injury.

No=Hands Symbol Failure to keep your hands away from the

blade will result in serious personal injury.

Hot Surface To reduce the risk of injury or damage,

avoid contact with any hot surface.

16495 Manual_Revised_12 0509 Page 5

GENERAL POWER TOOL SAFETY WARNINGS

,_ WARNmNG: Read all safety warnings and instructions. Failure to follow the

warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

READ AND SAVE THESE INSTRUCTIONS

,_ WARNING: This tool shall not be modified and/or used for any application

other than that for which it was designed.

• Be careful when moving the base to limit any finger pinch points.

• Keep children away. Keep the work area clean and dry.

= Do not load the base with more than 400 ibs.

= Place the base on a fiat surface and adjust the levelers before placing a

power tool or other item on the base.

= Never stand or sit on the base or the power tool or other item on the base.

= Test for stability with the tool in both the up and the down positions.

Exercise caution when testing the stability of top heavy machines (drill

presses, band saws, etc).

• Unplug any power tool before moving or repositioning your tool.

= Do not permit children to use the base unsupervised. It is not a toy.

= Be sure that all locking pins are in the set=up position holes before

using your mobile base.

= Always test your set=up for stability and safety after repositioning.

= When moving, always push on the base, not the power tool or other item on

the base.

Page 6 16495 ManuaLRevised_12 0509

KNOW YOUR ADJUSTABLE MOBILE BASE (Fig. 1)

Fig. 1

Side rail

Corner

fixed wheel Swivel wheel

with lock

PRODUCT SPECIFICATIONS

Weight 13.6 Ibs

Maximum square 34"x 34"

Minimum square 12" x12"

Maximum rectangle 18" x 50"

Maximum Load Capacity 400 Ibs

16495 Manual_Revised_12 0509 Page 7

,_IL WARNING: If any parts are broken or missing, do not attempt to operate the

mobile base until the broken or missing part is replaced. Failure to do so could

result in possibly serious injury.

_, WARNING: Do not attempt to modify this base or create accessories not

recommended for use with this base. Any such alteration or modification is misuse

and could result in a hazardous condition leading to possible serious injury.

UNPACKING

This product has been shipped disassembled.

* Carefully remove all the parts and accessories from the carton. Make sure

that all items listed in the packing list are included.

* Inspect the mobile base carefully to make sure no breakage or damage

occurred during shipping.

* Do not discard the packing material until you have carefully inspected and

satisfactorily operated the base.

* If any parts are damaged or missing, please return the base to the place

of purchase.

PACKAGE CONTENTS AND HARDWARES

Item Description

Corner

Swivel corner

Long side rail

Quantity

Page 8 16495 Manual_Revised_12 0509

H©

Short side rail

Fixed wheel

Swivel wheel

Long bolt (M8"45)

Locking nut (M8)

Short bolt (M6"12)

Flange nut (M6)

Locking nut (MIO)

Wheel bushing

16495 Manual_Revised_12 0509 Page 9

,_ WARNING: Never stand or sit on the base or the power tool or other item on

the base. Make sure to tighten all screws or nuts securely prior to use. Maximum

capacity is 400 Ibs.

ASSEMBLING SiDE RAILS WiTH CORNERS

Carefully measure the

footprint of your machine (or Fig. 2

other item) and add about 1"

to the dimension (1" allows

clearance for the fasteners).

Keep in mind that the base

adjusts in 1" increments.

Use the short bolts (I) (M6"12)

and the flange nuts (J) to

connect each of the long side

rails (C) with each of the short

side rails (D) according the

measured footprint of your

machine (Fig. 2). The short

side rail (D) is assembled to the inside of the long side rail (C).

Use the short bolts (I) (M6"12) and the flange nuts (J) to connect the side

rails by the corners (A) and swivel corners (B). The ends of the side rails are

always assembled to the insides of the corners (Fig. 3).

Page 10 16495 ManuaLRevised_12 0509

Tabla de contenidos

Idiomas:

Otros manuales de Accesorios de Craftsman

Craftsman

Craftsman 486.244122 Manual de usuario

Craftsman

Craftsman 316.792490 Manual de usuario

Craftsman

Craftsman 509344 Manual de usuario

Craftsman

Craftsman 486.24275 Manual de usuario

Craftsman

Craftsman 316.792400 Manual de usuario

Craftsman

Craftsman 875.204840 Manual de usuario

Craftsman

Craftsman 358.792403 Manual de usuario

Craftsman

Craftsman 944.511572 Manual de usuario

Craftsman

Craftsman 292660 Manual de usuario

Craftsman

Craftsman 351.240870 Manual de usuario

Craftsman

Craftsman 706.101330 Manual de usuario

Craftsman

Craftsman 486.24831 Manual de usuario

Craftsman

Craftsman 358.792421 Manual de usuario

Craftsman

Craftsman 316.792401 Manual de usuario

Craftsman

Craftsman ASF 486.246213 Manual de usuario

Craftsman

Craftsman 486.24100 Manual de usuario

Craftsman

Craftsman SNOW CAB 486.24276 Manual de usuario

Craftsman

Craftsman 240.74291 Manual de usuario

Craftsman

Craftsman 486.24628 Manual de usuario

Craftsman

Craftsman 335.25187 Manual de usuario

Craftsman

Craftsman 486.24545 Manual de usuario

Craftsman

Craftsman 31293 Manual de usuario

Craftsman

Craftsman 486.24599 Manual de usuario

Craftsman

Craftsman 315.22283A Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario