Craftex CT094 Manual de usuario

OWNER’S MANUAL

CT094 – HORIZONTAL/VERTICAL

SANDER

2

INDEX

GENERAL SAFETY INSTRUCTIONS Page 3

Features Page 4

Adjustments

Belt Tracking Page 5

Scale Page 6

Roller Adjustment Page 7

Operations

Test Run Page 8

Belt Selection Page 8

Edge & End Sanding Page 9

Contour Sanding Page 10

Changing the belt Page 11

Maintenance

General Page 12

Lubrication Page 12

Sanding Belt Page 12

Schematic Diagram Page 13

Parts List Page 14

Warranty Page 15

3

GENERAL SAFETY INSTRUCTIONS

EXTREME CAUTION SHOULD BE USED IN OPERATING ALL POWER TOOLS. KNOW

YOUR POWER TOOL, BE FAMILIAR WITH ITS OPERATION. READ THE OWNER’S

MANUAL AND PRACTICE SAFE USAGE PROCEDURES AT ALL TIMES.

CONNECT your machine ONLY to the matched and specified power source.

WEAR SAFETY GLASSES, RESPIRATORS, HEARING PROTECTION

and SAFETY SHOES when operating heavy machinery. Always wear safety

glasses.

DO NOT wear loose clothing or jewellery when operating machinery.

A Safe Environment is important. Keep the area free of dust, dirt and other

debris in the immediate vicinity of the machine.

BE ALERT! Do Not Use prescription or other drugs that may affect your ability

or judgement to safely use this machine.

DISCONNECT the power source when changing drill bits, hollow chisels or

making other adjustments or repairs.

NEVER leave an operating tool unattended.

NEVER reach over the table when the tool is in operation.

ALWAYS keep blades, knives or bits sharp and properly aligned.

ALWAYS keep all safety guards in place and ensure their proper function.

ALWAYS use push sticks and featherboards to safely feed your work through the

machine.

ALWAYS make sure that any tools used for adjustments are removed before

operating the machine.

ALWAYS secure your work with the appropriate clamps or vises.

ALWAYS keep bystanders safely away while operating machinery.

THINK SAFETY. WORK SAFELY. Never attempt a procedure if it does not

feel safe or comfortable.

4

CT094 – HORIZONTAL/VERTICAL SANDER

FEATURES

As part of the growing line of Craftex woodworking equipment, we are proud to

offer the CT094 Horizontal/Vertical Sander. The Craftex name guarantees Craft

Excellence. By following the instructions and procedures laid out in this owner’s

manual, you will receive years of excellent service and satisfaction. The CT094 is

a professional tool and like all power tools, proper care and safety procedures

should be adhered to.

Features

Motor: 1/2 HP - 4 AMP, 110V, 3450 RPM with keyed switch

Table Size -Two 12" x 8" cast aluminum tables, one with a 3/4" mitre gauge slot

Bed Size - 12 1/2" x 43/4"

Belt Size - 4" x 36" Quick Release

Belt Speed - 2,200 F.P.M Approx.

Pulley Size for Contour - 21/2"

Overall Height: 20" x 15" x 17"High

Gross Weight - 30 kg

Carton Size - 24" x 18" x 17"

5

CT094 – HORIZONTAL/VERTICAL SANDER

ADJUSTMENTS

6

CT094 – HORIZONTAL/VERTICAL SANDER

7

CT094 – HORIZONTAL/VERTICAL SANDER

8

CT094 – HORIZONTAL/VERTICAL SANDER

OPERATIONS

9

CT094 – HORIZONTAL/VERTICAL SANDER

10

CT094 – HORIZONTAL/VERTICAL SANDER

Tabla de contenidos

Otros manuales de Lijadora de Craftex

Manuales populares de Lijadora de otras marcas

Oliver

Oliver 6305 Manual de usuario

Jet

Jet 22-44 Pro-3 Manual de servicio

Makita

Makita M9204 Manual

Makita

Makita M9204 Manual de usuario

Craftsman

Craftsman 351.215131 Manual de usuario

Clarke

Clarke Woodworker CBS1-5B Manual de instrucciones

Chicago Pneumatic

Chicago Pneumatic CP9778 Manual de usuario

Nitto Kohki

Nitto Kohki BB-20 Manual de usuario

Ferm

Ferm FEOS-135 Manual de usuario

Unior

Unior 1510 Manual de usuario

stayer

stayer ls1200 Manual de usuario

Jet

Jet JSG-96 Manual de servicio

Parkside

Parkside PDS 290 B2 Manual de usuario

Status

Status XPA Series Manual de usuario

Clarke

Clarke EZ Sand Manual de usuario

Craftsman

Craftsman 113.22521 Manual de usuario

Craftsman

Craftsman 113.225831 Manual de usuario

CLAS

CLAS OP 1429 Manual de usuario