User Manual
351RCPG12NL, 351RCPG24NL, 351RCPG36NL
. www.cookingperformancegroup.com6
1. Turn off the manual valve and wait 5 minutes to clear air gas.
2. Turn all knobs to “OFF” position.
3.
4.
small as possible but large enough to guarantee reliable ignition of burners when knobs are turned
to “ON”.
Lighting Instructions
The pilot light on the appliance has been pre-set at the factory. A screwdriver may be required for the
initial
LIGHTING MAIN BURNER:
MAIN BURNER AIR SUPPLY:
1.
2. Loosen the screws on the front of the burner and adjust the air shutter to just eliminate the yellow
CAUTION:
•
injury. Turn off the unit, let it cool and use potholders and/or gloves to reposition or remove.
• The space between the legs at the bottom admits combustion air. It is imperative that this space
NOT be blocked.
•
that is required to put the unit in service.
• Do not permit fans to blow directly at the unit. Wherever possible, avoid open windows next to
the units’ sides or back. Avoid wall type fans which create air cross-currents within a room.
•
amount of air removed by any ventilating system. Otherwise, a subnormal atmospheric pressure
will occur, affecting operation and causing undesirable working conditions.
• A properly designed and installed hood will act as the heart of the ventilating system for the
room or area in which the unit is installed, and will leave the unit independent of changing draft
conditions.
NOTICE:
All valves must be checked and lubricated periodically. This must be done by an authorized service
agency.
