COXPAL A9D Manual de usuario
User Manual
Model No: A9D
Contents:
Safety Instructions
What’s In The Box
At A Glance
Specifications
microSD Card
Installation
Use
Warranty & Support
1. Daily Use
2. Shortcut Keys
3. LED Indicators
4. Screen Overview
5. Main Menu
6. Parking Monitor
7. Watch recordings via PC & TV
8. Reset
9. Firmware Upgrading
1
2
3
7
4
5
6
8
9
/01
/02
/03
/15
/04
/06
/08
/18
/19
Android & iOS APP
FAQs
10 /21
1Safety Instructions
Please read and understand all instructions hereunder before
using this product. If damage is caused by failure to follow the
instructions, the warranty does not apply.
Keep this user manual.
DO NOT operate this product while driving.
DO NOT drop, puncture, or disassemble this product.
DO NOT expose this product to liquid, or open flames.
DO NOT use any corrosive cleaners/oils to clean this product.
DO NOT install this product where it can block the driver’s view.
DO NOT use the power charger if the power cable is damaged, or
broken.
Use original accessories only.
Set time and date correctly before using this product.
Keep the camera lens clean and nothing blocking the lens.
Remove this product from your vehicle when not in use for a long
period.
Avoid long exposure to direct sunlight or high temperature that
may significantly shorten the lifespan of the product.
The Company is NOT responsible for the loss of any data during
the use.
Page / 01
A
F. 1 * Spare Adhesive Tape
D. 1 * Crowbar G. 1 * User Manual
. 1 * Coxpal A9D Dual Dash Camera E . 1 * GPS Mount,
With Adhesive Tape
B . 1 * USB to USB Type-C Cable 3.5M(11FT)
C . 1 * Dual USB Car Charger 5Vdc/2.4A
2What’s In The Box
A
C
B
D
E
G
F
Page / 02
3At A Glance
No Name Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1
3
17
5
2
6157 8 12
13
14
11
9
10
18
16
4
Working Indicator
LCD Screen
Down
OK
Up
IR LED lights
GPS Mount
USB Type-C port 1
USB Type-C port 2
microSD Card Slot
Parking Indicator
Speaker
Right
Left
Reset
Microphone
Front Camera Lens
Inside Camera Lens
Indicates working modes
1.5’’ TFT Color LCD Display
Navigate; Mute/Unmute
Power on/off; Confirm;
Navigate; Pause Recording Mode
6pcs IR LED lights for infrared night vision
Rotatable, detachable, adhesive
5Vdc power input
5Vdc power input & Video output
For an external microSD card
Indicates parking mode
Plays audio
Switch front/front+inside/inside preview
Return; Emergency lock; WiFi Shortcut Key
Records audio
Rotatable by GPS mount
5° all-direction rotatable
Reset to factory default
Page / 03
4microSD Card
1. This camera supports genuine microSD memory card up to 256GB
with a speed rating of class 10(UHS-1) or above.
2. For 64GB or 128GB or 256GB card, please beforehand format it to
FAT32, the card can be formatted by either this camera or computer
(Windows & Mac).
3. DO NOT remove, or insert the card when this camera is powered
on which may cause card corruption and data loss.
4. Typical recording time in normal recording mode:
Capacity
32GB
64GB
128GB
1440P@30FPS
Front Single
1080P@60FPS
Front Single
1080P@30FPS
Dual
5. Insert the card with the gold contacts facing the screen side of
the camera, push the card until it clicks into the place.
6. To remove the card, gently push its top edge inward until it
clicks, then pull it out of the card slot.
5
6
Page / 04
3 3.5 3.5
5.8 7 7
11.8 14 14
7. The recordings will be saved into following 4 folders respectively:
What’s the folder? Overwritten if set loop recording?
Yes
· Based on “First in first out” when
storage is full;
· If set loop recording off, pop-up
box appears when storage is full.
· Manually locked;
· G-sensor locked;
· Moved from
“Normal”.
· Normal;
· Parking.
1. Loop recording means the memory card is written and
overwritten frequently, therefore, we strongly recommend to use
high endurance card and not recommend to use generic card.
2. Check and format the microSD card every 2 weeks to ensure it
works properly and stores the data securely.
Folder
Front Normal
Front Event
Inside Normal
Inside Event
Note:
No
· Pop-up box appears when
storage is full.
· Need to manually export/delete
the file, or format the SD card.
· Normal;
· Parking.
· Manually locked;
· G-sensor locked;
· Moved from
“Normal”.
Yes
· Based on “First in first out” when
storage is full;
· If set loop recording off, pop-up
box appears when storage is full.
No
· Pop-up box appears when
storage is full.
· Need to manually export/delete
the file, or format the SD card.
Page / 05
5Installation
1. Install this product near the rear-view mirror to obtain the best open-
field view.
2. DO NOT install it in a location where may obstruct driver’s view.
3. Ensure the lens is within the wiping range of the windscreen wiper
to ensure a clear view in all weather conditions.
4. Keep the lens stays clean to ensure clear videos – be especially
careful not to leave fingerprints.
5. Ensure the surface of the windscreen is clean and dry and attach the
adhesive mount onto the windscreen securely.
6. Store spare adhesive tape in case of future use.
Steps to install:
Insert a memory card into the camera.
Power on the camera by connecting with the supplied power cable
and USB car charger (or, a 5Vdc/2A wall charger if at home, i.e. DO
NOT get power from computer’s USB or car’s own USB ports).
If “SD card error”, please format the microSD card.
Implement the installation if everything works normally.
1. Quick test before installation.
Page / 06
3. Remove the protective film of the adhesive tape and firmly affix the
mount onto the windshield.
4. Use the crowbar to tuck and hide the power cable into the seams
and weatherstrips around the edge of the dashboard.
5. Adjust the viewing angle of front lens and rear lens respectively to
ensure that they are aligned with the road ahead and the cabin
inside.
2. Select an ideal location (A or B or C) on the windshield near the
rear-view mirror, clean with clear water and wait until fully dry.
c
Page / 07
Tabla de contenidos
Otros manuales de Cámara de salpicadero de COXPAL
