Terms of Use
Method of lock and release
Check if the push button is up.
If you move the lock slide to
the front, the push button is
locked and you can't ignite.
If you move the lock slide to
the back, the push button is
released and you can ignite.
Please hold the push button with your finger when
you release it to prevent ignite.
Consecutive burning operation
Please hold the push button and move the lock slide
to the front to operate the
consecutive burning.
Please move the lock slide to
the back when you stop the
consecutive burning, then the
push button goes up and you
can put out a fire.
☆Be careful about burn and a
fire by checking ignition and putting out when you
operate the consecutive burning.
Move the lock slide to the other side way tightly.
Installing the battery
Make sure push button is locked.
Open a battery cover on bottom of the product and
place AA battery.
Be sure to close battery cover to avoid possible
electrical shock.
☆Please remove the battery when you move the
body, put it away, or do not use it for many hours.
◎
1.
2.
3.
4.
◎
1.
2.
☆
◎
・
・
・
