1. Overview
2. Extended-UART Wiring and Connection
Extended-UART pins of AME series
Connection method
Internal circuit and recommended value of pull-up resistor
Address setting
3. Communication Specifications
Communication specifications
4. Communication Protocol
Overview
Communication frames and packets
Structure of data bit
Check sum
Data format of command packet
Data format of reply packet
Reply packet in case of communication error
5. Hardware Specifications of Extended-UART
Absolute maximum ratings for communication terminals
Electrical characteristics of communication terminals
Wiring length
Electrical characteristics of communication signal
6. Command Specifications of Extended-UART
Outline of commands in Extended-UART
Commands to turn output voltage on/off
Commands to set output voltage
Commands to set constant current
Commands to set output voltage sequence
Commands to set accessory functions
Monitor commands
State acquisition commands
Commands to set address, memory, and communication
Commands to acquire product information
Appendix
List of Extended-UART commands
Availability and accuracy of Extended-UART commands
A. Revision history
Note: The contents described in this document are those available at the time of publication and are subject to change
without prior notice due to product improvement and corresponding changes in the specifications. Please check the
web page of COSEL for the latest version.
We have paid full attention to ensure the accuracy of this document. We will not be responsible for any damages,
including those due to misstatement and/or missing information, and indirect faults resulting from the use of the
information in this document.
Appendix2 Appendix-4
A-1
Appendix1 Appendix-1
6.6 32
6.7 36
6.8 38
6.9 41
6.10 48
6.3 20
6.4 23
6.5 26
6.2 15
9
5.1 9
5.2 9
5.3 9
5.4 10
11
6.1 11
4.5 7
4.6 8
4.7 8
4.2 5
4.3 6
4.4 6
4
3.1 4
5
4.1 5
2.2 2
2.3 2
2.4 3
AME series ---Extended-UART---
Page
1
1
2.1 1
ver1.1E 2020.2.12
