Contixo DR1 Manual de usuario
RC Roaring Raptor DR1
User Manual
PLEASE READ THIS MANUAL BEFORE USING.
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE
*product colors may vary
Click the button on the Velociraptor, the Velociraptor will automatically demonstrate the
function.
DR1 RC Roaring Raptor Setup
Remote Battery Installation
1. Use a screwdriver to remove the battery cover.
3. Replace the battery cover and screw back into place.
2. Place three AA’s with the corresponding polarities as labeled on the unit.
DR1 Remote Control
Demo button
Head
Control
Movement
& Action
The dinosaur has been installed batteries, please remove the insulating tape from the
batteries before use.
Battery Warnings
1. Insert batteries with correct polarity.
2. Do not mix old and new batteries.
3. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
4. Rechargeable batteries are to be removed from the drone before being charged.
5. Rechargeable batteries are only to be charged under adult supervision.
6. Exhausted batteries are to be removed from the drone.
7. The supply terminals are not to be short-circuited.
8. In order to avoid battery leakage causing damage to the remote controler, please take out the
battery if not in use for a long time.
Tail installation
Push the tail on until it "clicks".
CONTACT INFORMATION
E-Mail: support@con�xo.com
Website: www.con�xo.com
©2021 Con�xo Inc. All rights reserved. Con�xo®, the Con�xo logo and
associated characters, trademarks and design elements are owned and
licensed by Con�xo Company.
Tabla de contenidos
Otros manuales de Juguete de Contixo
Contixo
Contixo T1 Manual de usuario
Contixo
Contixo SC1 Manual de usuario
Contixo
Contixo T2 Manual de usuario
Contixo
Contixo T1 Manual de usuario
Contixo
Contixo Kids V9 Manual de usuario
Contixo
Contixo Kids K81 Manual de usuario
Contixo
Contixo RC Dragon DR3 Manual de usuario
Contixo
Contixo T2 Manual de usuario
Contixo
Contixo DB1 Manual de usuario
Contixo
Contixo DR2 Manual de usuario
