Continu.us CT-2270 Manual de usuario
User Manual
CT-2270/CT-2860/CT-3270
Before operating this product, please read user manual completely
1
Table of Contents
Table of Contents....................................................................................................1
Important Safety Instructions..................................................................................2
Getting Started .......................................................................................................4
USB Operation ...................................................................................................... 22
Troubleshooting.....................................................................................................24
Attaching the TV Stand............................................................................................ 25
Limited Warranty..................................................................................................... 28
TV Operation and System Setup............................................................................7
2
Important Safety Instructions
is intended to alert the user to the presence of uninsulated "dangerous
magnitude to constitute a risk of electric shock to persons.
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS ON OR NEAR
THIS UNIT.
SHOULD ANY TROUBLE OCCUR, DISCONNECT THE AC POWER CORD AND
CONTACT A QUALIFIED TECHNICIAN.
CAUTION MARKINGS LOCATED AT THE REAR OF THE APPARATUS.
CAUTION
WARNING
A warning that an apparatus with CLASS I construction shall be connected
to a MAINS socket outlet with a protective earthing connection.
WARNING
Wash hands after handling.
This product can expose you to chemicals including lead, which is known to the
State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
3
1) Read these instructions.
2) Keep these instructions.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
11)
12)
13)
14)
15)
16)
9) Do not install near any heat sources such as radiators, heat registers,
10) Do not defeat the safety purpose of the polarized or grounding-type plug.
for replacement of the obsolete outlet.
combination to avoid injury from tip-over.
periods of time.
the apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped.
is securely connected.
Important Safety Instructions
4
Getting Started
2. Standby Indicator
Indicates whether the unit is ON or in STANDBY (OFF) mode.
1. Remote Sensor
CT-2270
CT-2860/CT-3270
Do not block this sensor or the remote control will not work.
3. The functions of the buttons are described as bellows:
STANDBY: Press to turn the unit on or off.
SOURCE: Press to select the input source of the TV.
MENU: Press to display the OSD menu, Press again to exit the menu.
CH+/-: Press to scan through channels.
VOL+/-: Press to adjust the volume.
Front View
1 2 3
123
5
Getting Started
Back View
VGA PC
AUDIO RF USB
HDMI2 HDMI3
(ARC)
HDMI1
L R
AUDIO IN
R L
AUDIO OUT
Y/VIDEO Pb Pr
Headphone OPTICAL
10. USB Port
Connecting for USB device.
6. HDMI Input Jack
Connecting of HDMI signal.
7. VGA Input
Connecting to the video output jack a personal computer.
8. PC Audio Input Jack
Connected to the audio output jack on a personal computer.
5. YPbPr Input Jack
Connecting for component signal input in YPbPr mode.
Note: Y and VIDEO interface is shared.
9. Antenna Input Jack
Connecting to external antenna to receive the TV.
2. Headphone Jack
3. Optical Output Jack
4. Audio Input Jack
Note: YPbPr and AV audio is shared.
1. Audio Output Jack
CT-2270
CT-2860/CT-3270
L R
AUDIO IN Y/VIDEO Pb Pr
HEAD
PHONE OPTICAL VGA PC
AUDIO
R L
AUDIO OUT
HDMI RF USB
6
Getting Started
The Guest Remote Control - R230D1A
7. NUMBER BUTTONS
Selects channel numbers.
1. POWER
13. SYSTEM
multiple TVs are in the same room.
4. SOUND
3. SLEEP
Sets the sleep timer.
6. GUIDE
Displays a channel list menu.
8. GO BACK
Return to the previous channel.
5. CC
10. VOL+/VOL-
Adjusts sound level.
9. CH+/CH-
Changes the channel.
11. MUTE
2. INPUT
Selects the input source.
16. MENU
Displays the Guest Menu.
14. Navigational Controls
Adjusts or selects menu settings.
15. OK
Accepts your selection.
12. INFO
Displays the current channel info.
17. CLEAR
Exits from any OSD.
This remote is used by the hotel guest. It prevents the guest from changing
1
2
3
4
5
6
10
11
14
15
16
7
8
9
12
13
17
7
Initial Setup Wizard
After connecting your TV antenna or cable wire, turn the television ON. The quick
setup wizard will display on-screen. Select your preferred Picture setting followed by
antenna options if you will view local over-the-air TV broadcasts from an antenna.
These channels will be stored in the TV tuner memory after performing Channel Auto
Scan.
Select Language
Press ◄/► button to select the language
to be used for menus and message.
Press ▼/▲ button to select go to next
step and press OK/► button to go.
Select Time
Press ▼/▲ button to select the time
zone, daylight saving time and time
format you want.
Press ◄/► button on the remote control
to adjust.
Press ▼/▲ button on the remote control
to select go to next step and press OK/►
button to go.
Auto Scan
Press◄/►button to select the antenna
type.
Press▼/▲button to select go to next
step.
Press OK/► button to start auto scan.
Channels found will be stored into the
TV tuner memory.
TV Operation and System Setup
8
Picture Menu
Press MENU button to display the main menu, press ◄ / ► button to select Picture.
Press ▼/▲ button to select submenu.
Press ◄ / ► button to adjust options.
Press MENU button to back the previous menu.
Picture Mode
Adjust picture mode to change picture appearance.
Press ◄ / ► button to select (Standard / Soft / User / Dynamic ).
Note:The brightness, contrast, color, tint and sharpness are only available in User
mode, you can adjust as you like.
Brightness
Adjust the visual perception output of the entire picture, it will effect the luminousness
of the picture.
Press ◄ / ► button to adjust.
Contrast
Adjust the highlight intensity of the picture, but the shadow of the picture is invariable.
Press ◄ / ► button to adjust.
Color
Adjust the saturation of the color based on your own preference.
Press ◄ / ► button to adjust.
Tint
Adjust the hue (Red, Green, Blue) of the picture.
Press ◄ / ► button to adjust.
Sharpness
Adjust the peaking in the detail of the picture.
Press ◄ / ► button to adjust.
TV Operation and System Setup
12
6
Picture
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Color Temperature
Advanced Settings
Standard
Select Move EXITMENU
Normal
50
50
50
50
50
Time Setup Parental ChannelAudio
12
6
9
Color Temperature
Adjust the color personality of the picture to your preference.
Normal - Gives the white colors a neutral tint.
Warm - Gives the white colors a reddish tint.
Cool - Gives the white colors a bluish tint.
Sound Mode
Note:The bass, treble and balance are only available in User mode, you can adjust
as you like.
Bass
Increases or decreases lower-pitched sounds.
Press ◄ / ► button to adjust.
Treble
Increases or decreases high-pitched sounds.
Press ◄ / ► button to adjust.
Balance
Adjust the balance between left and right speakers to adapt to your listening position.
Press ◄ / ► button to adjust.
TV Operation and System Setup
Sound Mode
Treble
Bass
Balance
MTS
Audio Language
Digital Audio Output
Surround Sound
AVL
TV Speaker
Standard On
Select SelectMove MoveEXIT EXITMENU MENU
Stereo
English
PCM
Off
Off
50
50
0
Time TimeSetup SetupParental ParentalChannel Channel
12 12
6 6
Audio Menu
Press MENU button to display the main menu, press ◄ / ► button to select Audio.
Press ▼/▲ button to select submenu.
Press ◄ / ► button to adjust options.
Press MENU button to back the previous menu.
Picture Picture
Audio Audio
Select a sound mode to achieve ideal sound.
Press ◄ / ► button to select (Standard / User / Movie / Sports / Music).
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
