Contec AD12-64(PCI) Manual de usuario

AD12-64(PCI)Ver.3.00

PCI-bus Analog Input Board

AD12-64(PCI)

Thisboard isinterface board ofthePCIbusconformity

whichinputsanalogsignaland performsconversion (AD

translation)to adigitalsignal.

Conversion speed:10µsec/ch, resolution:AD translation is

madein 12bits.

By usingattached APIfunction library API-PAC(W32), the

application softwareforWindowscan becreatedby the

variousprogramminglanguageswhicharesupporting

Win32APIfunctions, such asVisualBasic, and VisualC/

C++.

Features

-Multi-channelanaloginputcapability

64 single-ended analoginputsor32 differentialanalog

inputs. Single-ended ordifferentialinputisselected by

software.

-Multi-channelanaloginput

Analoginputofasingleand 64 inputs, and 32 differential

inputsispossible.

Selection ofasingleand input, and adifferentialinputcan

besetup by software.

-Inputrangesetup by software

Inputrangecan bechosen fromthefollowingrangesfor

everychannel, and can besetup by software.

±10V, ±5V, ±2.5V, ±1.25V, 0-+10V,0-+5V, 0-+2.5V,

0-+1.25V

-Inputrangesetup by software

Asamplingto thearbitrarytimingby softwareorthe

periodicsamplingwhich synchronized with thesampling

clock can beperformed.

Theselection ofexternalsamplingclocksignalwhich uses

thedigitalsignalinputted fromtheinternalsampling clock

whichusestheclock generatorofboardloading, and the

outsideispossibleforasamplingclock.

-DigitalI/Ofunction

IthasfourdigitalinputsofTTLlevel,and fourdigital

outputs, and themonitorofexternalapparatusand control

can beperformed.

-Option apparatus

Byusingoption apparatus,connection can beperformed

easily.

Pleasereferto"cableconnector"and "accessories"aboutan

option.

Cable & Connector (Option)

Cable (option)

96pinhalf96pin shield cable:PCB96PS-1.5

96pinhalf96pin flatcable:PCA96P-1.5

96pinhalf96pin shield cable:PCA96PS-1.5

Connector (Option)

96pin halfpitch (female)connector5piece set:

CN5-H96F

Accessories (Option)

Solderless relay terminalunit :EPD-96 *

* Option cablePCB96PS-1.5 isrequired separately.

Packing List

- Board [AD12-64(PCI)] - 1

- User's Guide - 1

- CD-ROM [API-PAC(W32)] - 1

Ver.3.00AD12-64(PCI)

Specification

Item AD12-64(PCI)

Analog input

Number of input

channels

64 single-ended input channels or 32 differential input channels

(specified by software)

Input range

Non-insulated bipolar ±10V, ±5V, ±2.5V, ±1.25V

or Non-insulated unipolar 0~10V, 0~5V, 0~2.5V, 0~1.25V

(specifiable by software for each channel)

Maximum input voltage

±15V

Input impedance

1M Ohm or higher

Resolution

12bit

Non-1inear error *1

±2LSB (±10V, ±5V, 0~10V. 0~5V range)

±4LSB (±2.5V, ±1.25V, 0~2.5V range)

±8LSB (0~1.25V range)

Conversion rate

10µsec/ch at Max.

Conversion start trigger

Software/sampling clock

Sampling clock

Internal sampling clock : 10,000~1,073,741,824,000nsec

(specified in steps of 250nsec)

External sampling clock : TTL-level falling edge

Digital input/output

Number of output points

Non-insulated 4 output points (TTL-level active high)

Number of input points

Non-insulated 4 input points (TTL-level active high)

Programmable timer

Specifiable cycles

500~1,073,741,824,000nsec (specifiable in steps of 250nsec)

Status

Count-up, count-up overrun

Timer output signal

TTL-level 250nesc low pulse, low output current IOL = 24mA

External trigger input

External trigger input signal

Non-insulated one point input (TTL-level rising edge)

Status

Trigger input, trigger input overrun

Interrupt

Interrupt level

1point

Interrupt source

8types

Interface connector

CN1

PCR-E96LMD (product of HONDA TUSUSHIN KOGYO Co.,

LTD.) or equivalent

General

I/O addresses

32ports occupied

Operating conditions

0~50°C, 20~90% (No condensation)

Current consumption *2

DC+5V 700mA (Max.)

Dimensions (mm)

176.4(L) x 107.0(H)

Weight

150g

The nonlinearity error can be 0.1% of the maximum range at an ambient temperature of 0 or

50°C Celsius. The error can

be minimized by calibrating the board at the temperature equalto

the temperature of the operating environment.

2 Current consumption increases if power (+5V) is supplied to an external device from

connector.

176.4

107.0

[mm]

Board size

AD12-64(PCI)Ver.3.00

External Connection

Connection method with a connector

by the interf ace connector on board (CN1).

The example of connection of option

Support Software

Attached support software

API Function Library API-PAC(W32)

It is the library software which offers the command to the

hardware of our company in standard Win32API function (DLL)

form for Windows.

By the various programming languages which are supporting

Win32API functions, such as Visual Basic, and Visual C/C++,

the high-speed application software which harnessed the spe-

cial feature of the hardware of our company can be created.

Moreover, it can use also for the check of hardware of opera-

tion by the installed diagnostic program.

For details, please refer to Help or the homepage of our com-

pany in appending CD-ROM.

Environment of operation

Main correspondence OS Windows 2000, NT, Me, 98, etc

Main adaptation languages Visual C++, Borland C++, Visual

Basic, etc.

Others The hard disk which has 20MB empty domain for ev-

ery library software is required.

The newest driver and download service (http://www.contec.

co.jp/apipac/) of difference file are also offered.

Optional Support Software

Collection for measurement systems development of ActiveX

components

ACX-PAC(W32)BP

It is the convenient measurement systems development tool

for Windows in which the collection of examples which can be

used immediately, and the collection (collection of software

parts) of components which can program easily only by com-

bining were mentioned.

Component for control of the input-and-output board (card) of

our company is made the one package. Analog I/O, digital I/O,

control of each interface of GPIB communication and X-Y graph

display, and file preservation are possible.

Collection for measurement systems development of ActiveX

components

ACX-PAC(W32)AP

In addition to the function of ACX-PAC(W32)BP, components,

such as display systems, such as various graph, switch, and

lamp, and operation / analysis, serve as a package.

DDE server DDE SERVER(W32)

It is the software which transmits to DDE client by the cycle

which specified the data from the hardware of our company, or

setup. Data collection / analysis system can be easily created

combining DDE client software, such as Excel97, and

Wonderware InTouch, Visual Basic.

Ver.3.00AD12-64(PCI)

Interface Connector

AD12-64(PCI) CN1Pin Assignmentsto Signals

Analog Input59/27[-]

Analog Input51/27[+]

Analog Input58/26[-]

Analog Input50/26[+]

Analog Input57/25[-]

Analog Input49/25[+]

Analog Input56/24[-]

Analog Input48/24[+]

Analog Ground

Analog Input43/19[-]

Analog Input35/19[+]

Analog Input42/18[-]

Analog Input34/18[+]

Analog Input41/17[-]

Analog Input33/17[+]

Analog Input40/16[-]

Analog Input32/16[+]

Analog Ground

Analog Input27/11[-]

Analog Input19/11[+]

Analog Input26/10[-]

Analog Input18/10[+]

Analog Input25/9[-]

Analog Input17/9[+]

Analog Input24/8[-]

Analog Input16/8[+]

Analog Ground

Analog Input11/3[-]

Analog Input3/3[+]

Analog Input10/2[-]

Analog Input2/2[+]

Analog Input9/1[-]

Analog Input1/1[+]

Analog Input8/0[-]

Analog Input0/0[+]

Analog Ground

Ext.Sampling ClockInput

Digit alGrou nd

Ext.TriggerInput

Digit alGrou nd

Digit alInput3

Digit alInput2

Digit alInput1

Digit alInput0

[49][1]

[96] [48]

B48

B47

B46

B45

B44

B43

B42

B41

B40

B39

B38

B37

B36

B35

B34

B33

B32

B31

B30

B29

B28

B27

B26

B25

B24

B23

B22

B21

B20

B19

B18

B17

B16

B15

B14

B13

B12

B11

B10

B09

B08

B07

B06

B05

B04

B03

B02

B01

A48

A47

A46

A45

A44

A43

A42

A41

A40

A39

A38

A37

A36

A35

A34

A33

A32

A31

A30

A29

A28

A27

A26

A25

A24

A23

A22

A21

A20

A19

A18

A17

A16

A15

A14

A13

A12

A11

A10

A09

A08

A07

A06

A05

A04

A03

A02

A01

Analog Input63/31[-]

Analog Input55/31[+]

Analog Input62/30[-]

Analog Input54/30[+]

Analog Input61/29[-]

Analog Input53/29[+]

Analog Input60/28[-]

Analog Input52/28[+]

Analog Grou nd

Analog Input47/23[-]

Analog Input39/23[+]

Analog Input46/22[-]

Analog Input38/22[+]

Analog Input45/21[-]

Analog Input37/21[+]

Analog Input44/20[-]

Analog Input36/20[+]

Analog Grou nd

Analog Input31/15[-]

Analog Input23/15[+]

Analog Input30/14[-]

Analog Input22/14[+]

Analog Input29/13[-]

Analog Input21/13[+]

Analog Input28/12[-]

Analog Input20/12[+]

Analog Grou nd

Analog Input15/7[-]

Analog Input7/7[+]

Analog Input14/6[-]

Analog Input6/6[+]

Analog Input13/5[-]

Aanalog Input5/5[+]

Analog Input12/4[-]

Analog Input4/4[+]

Analog Grou nd

+5VDCfromPC

Sampling Busy

TimerOutpu t

DigitalOutpu t3

DigitalOutpu t2

DigitalOutpu t1

DigitalOutpu t0

*Pinnu mbersinparentheses"[]"complywit hthosedefinedby

HONDATSUSHINKOGYO CO., LTD.

Analog Input 0

to Analog Input 63 Analog input signals in single-ended input mode.

The numbers correspond to channel numbers.

Analog Input 0 [+]

to Analog Input 31 [+] Analog input signals in differential inputs.

The numbers correspond to channel numbers.

Analog Input 0 [-]

to Analog Input 31 [-]Analog input signals in differential inputs.

The numbers correspond to channel numbers.

Analog Ground Analog ground common to analog I/O signals.

Digital Input 0 to Digital Input 3 Digital input signal.

Digital Output 0 to Digital Output 3

Digital output signal.

External Trigger Input External trigger input signal.

External Sampling Clock Input External sampling clock input signal.

Timer Output Timer output signal

Sampling Busy output Sampling busy output signal

+5V DC from PC Supplies 1 ampere of current at +5 volts.

Digital Ground Digital ground common to "Simultaneous Hold

Output" and "+5V DC from PC".

Notes!

-Do notconnectanyoftheoutputsand poweroutputsto theanalog ordigitalground.

-Neitherconnectoutputsto each other.

-Doing eithercan result in a fault.

AD12-64(PCI)Ver.3.00

AD12-16(PCI) CN1Pin Assignmentsto Signals

N.C.

Analog Ground

N.C.

Analog Ground

N.C.

Analog Ground

Analog Input11/3[-]

Analog Input3/3[+]

Analog Input10/2[-]

Analog Input2/2[+]

Analog Input9/1[-]

Analog Input1/1[+]

Analog Input8/0[-]

Analog Input0/0[+]

Analog Ground

Ext.Sampling ClockInput

DigitalGround

Ext.TriggerInput

DigitalGround

DigitalInput3

DigitalInput2

DigitalInput1

DigitalInput0

[49] [1]

[96] [48]

B48

B47

B46

B45

B44

B43

B42

B41

B40

B39

B38

B37

B36

B35

B34

B33

B32

B31

B30

B29

B28

B27

B26

B25

B24

B23

B22

B21

B20

B19

B18

B17

B16

B15

B14

B13

B12

B11

B10

B09

B08

B07

B06

B05

B04

B03

B02

B01

A48

A47

A46

A45

A44

A43

A42

A41

A40

A39

A38

A37

A36

A35

A34

A33

A32

A31

A30

A29

A28

A27

A26

A25

A24

A23

A22

A21

A20

A19

A18

A17

A16

A15

A14

A13

A12

A11

A10

A09

A08

A07

A06

A05

A04

A03

A02

A01

N.C.

Analog Ground

N.C.

Analog Grou nd

N.C.

Analog Grou nd

Analog Input15/7[-]

Analog Input7/7[+]

Analog Input14/6[-]

Analog Input6/6[+]

Analog Input13/5[-]

Analog Input5/5[+]

Analog Input12/4[-]

Analog Input4/4[+]

Analog Grou nd

+5VDCfromPC

Sampling Busy

TimerOutput

Digit alOutpu t3

Digit alOutpu t2

Digit alOutpu t1

Digit alOutpu t0

*Pinnumbersinparentheses"[]"complywiththosedefinedby

HONDATSUSHINKOGYO CO., LTD.

Analog Input 0

to Analog Input 15 Analog input signals in single-ended input mode.

The numbers correspond to channel numbers.

Analog Input 0 [+]

to Analog Input 7 [+] Analog input signals in differential inputs.

The numbers correspond to channel numbers.

Analog Input 0 [-]

to Analog Input 7 [-]Analog input signals in differential inputs.

The numbers correspond to channel numbers.

Analog Ground Analog ground common to analog I/O signals.

Digital Input 0

to Digital Input 3 Digital input signal.

Digital Output 0

to Digital Output 3 Digital output signal.

External Trigger Input External trigger input signal.

External Sampling Clock Input External sampling clock input signal.

Timer Output Timer output signal

Sampling Busy output Sampling busy output signal

+5V DC from PC Supplies 1 ampere of current at +5 volts.

Digital Ground

Digital ground common to "Simultaneous Hold Output"

and "+5V DC from PC".

N.C. No connection to this pin.

Notes!

-Do notconnectanyoftheoutputsand poweroutputsto theanalog ordigitalground.

-Neitherconnectoutputsto each other.

-Doing eithercan result in a fault.

Ver.3.00AD12-64(PCI)

Analog Input Connection

Theinputformofanalogsignalhasasingleand input, and differentialinput,and theconnection methodswithasignaldiffer,

respectively. Here, theexamplein thecaseofconnecting usingaflatcableorashieldcableisshown.

Single-ended Input

Itisan exampleofconnection when usingaflatcable.

Thesource ofasignaland aground areconnected to 1 to 1 to each analog inputchannelofCN1.

Analog Input0...63

Analog Ground V

BOARDCN1 Cable Signal Source

*1 0...15 on theAD12-16 (PCI) board

Itistheexampleofconnection which used theshield cable. Whenthedistance ofthesource ofasignaland aboardislong,please

useit to enlargenoise-proofnature. To eachanaloginputchannelofCN1, wirelineisconnectedto signallineand thegroup edited

by theshield isconnected to aground.

Analog Ground

Shieldcable

Analog Input0...63

BOARDCN1SignalSource

*1 0...15 on theAD12-16 (PCI) board

Notes!

-Frequency componentshigherthan 1MHzcontained in a signalmaycausecrosstalkacross channels.

- When a frequency ingredient1MHzormoreiscontained in thesource ofsignal, thecross talkbetween channelsmayoccur.

- When a board and thesource ofa signalareinfluenced ofa noise, orwhen thedistance ofa board and thesource ofa signalis

long, it maybeunableto inputin exactdata bytheconnection method.

-Analog signalto inputmustnotexceed themaximuminputvoltageon thebasisoftheanalog ground ofa board. Aboard may

bedamaged when it exceeds.

-Conversion data isunknown when inputterminalisnotconnected. Pleaseconnectwith analog ground too hastilytheinput

terminalofa channelwhich isnotconnected to thesource ofa signal.

Differential input mode

Itisan exampleofconnection when usingaflatcable.

[+]inputofeachanaloginputchannelofCN1 isconnected to asignal,and [-] inputisconnected to theground ofthesourceofa

signal. Furthermore, theanalogground ofaboard and theground ofthesource ofasignalareconnected.

Analog Input0[+]...31[+]

Analog Ground

BOARDCableSignalSource

Analog Input0[-]...31[-]

CN1

*2 0[+]...7[+]and 0[-]...7[-] arerespectivelyapplicabletoAD12-16(PCI).

Itistheexampleofconnection which used 2 heartshield cableetc. When thedistance ofthesource ofasignaland aboard islong,

pleaseuseit toenlargenoise-proofnature. [+]inputofeach analoginputchannelofCN1 isconnected toasignal,and [-] inputis

connected to theground ofthesourceofasignal. Furthermore, theanalog ground ofaboard and theground ofthesource ofasignal

areconnected in thegroup editedby theshield.

Analog Input0[+]...31[+]

Analog Ground

BOARDSignal Source

Analog Input0[-]...31[-]

CN1Shield cable

*2 0[+]...7[+]and 0[-]...7[-]arerespectively applicableto AD12-16(PCI).

Notes!

- When a frequency ingredient1MHzormoreiscontained in thesource ofsignal, thecross talkbetween channelsmayoccur.

-Conversion data becomesunfixed when analog ground isnotconnected.

- When a board and thesource ofa signalareinfluenced ofa noise, orwhen thedistance ofa board and thesource ofa signalis

long, it maybeunableto inputin exactdata bytheconnection method.

-Analog signalinputted into [+]inputand [-]inputmustnotexceed themaximuminputvoltageon thebasisofanalog ground of

a board. Aboard maybedamaged when it exceeds.

-Conversion data when having notconnected terminalof[+]inputor[-]inputisunfixed. Both should connectwith an analog

ground too hastilytheterminalof[+]inputofthechannelwhich doesnotconnectwith thesource ofa signal, and [-]input.

AD12-64(PCI)Ver.3.00

Connection of Digital and control signal

Theexamplein thecaseofconnectingadigitalI/Osignaland controlsignals(externalsamplingclock inputsignal, "SamplingBusy

Output", etc.)usingaflatcableisshown.

CN1 and externalapparatusareconnected using optionalflatcable(PCA96P-1.5)etc.

All ofthesedigitalI/Osignalsand acontrolsignalarethesignalsofTTL level.

Connecting the Control Signal Inputs

DigitalGround

TargetCableCN1

Input

10kΩ

BOARDALS 540 orequivalent

Connecting the Control Signal Outputs

DigitalGround

TargetCableCN1Output

IOL=24mA

BOARDALS540 orequivalent

Notes!

-Pleaseconnecteach outputneitherwith analog ground nora digitalground too hastily. Itbecomesthecauseoffailure.

Block Diagram

64/16 single-end /

32/8 differential

Analog Inputs

4Digital Input /4Digital Output

External Sampling Clock Input /

External Trigger Input

Timer Output /Sampling Busy Output

PCIbus

CN1

FPGA

Multiplexer

DC/DC

converter

Instrument

Amplifre

A/D

Converter

Otros manuales para AD12-64(PCI)

Otros manuales de Tarjeta PCI de Contec

Contec

Contec SMC-8DL-PCI Manual de usuario

Contec

Contec ADA16-32/2(PCI)F Manual de usuario

Contec

Contec DIO-1616T-LPE Manual de usuario

Contec

Contec CFast CFS-32GBM-A Manual de usuario

Contec

Contec AD16-64(LPCI)LA Manual de usuario

Contec

Contec AO-1604CI3-PCI Manual de usuario

Contec

Contec COM-2(PCI)H Manual de usuario

Contec

Contec ADI12-16(PCI) Manual de usuario

Contec

Contec DIO-1616B-LPE Manual de usuario

Contec

Contec COM-1(LPCI)H Manual de usuario

Contec

Contec SMC-4DF-PCI Manual de usuario

Contec

Contec AI-1216B-RB1-PCI Manual de usuario

Contec

Contec PI-64L Series Manual de usuario

Contec

Contec DIO-1616T-PE Manual de usuario

Contec

Contec AO-1616L-LPE Manual de usuario

Contec

Contec IPC SERIES Manual de usuario

Contec

Contec FX-DS540-MPCI4W Manual de usuario

Contec

Contec GPIB-F-LPE Manual de usuario

Contec

Contec AD12-64(PCI) Manual de usuario

Contec

Contec IPC SERIES Manual de usuario

Contec

Contec PIO-16/16RL(PCI)H Manual de usuario

Contec

Contec DIG-100M1002-PCI Manual de usuario

Contec

Contec PC-HELPER Series Manual de usuario

Contec

Contec PIO-64/64L(PCI)H Manual de usuario

Manuales populares de Tarjeta PCI de otras marcas

ERMA

ERMA SSI 1417 Manual de usuario

SIIG

SIIG CyberSerial Dual PCI Instrucciones de montaje

Moxa Technologies

Moxa Technologies CP-102E Manual de usuario

I-Bus

I-Bus IBC2602 Manual de usuario

Exsys

Exsys EX-60102 Manual de usuario

Chelsio Communications

Chelsio Communications T5 Series Manual de usuario

Conrad Electronic

Conrad Electronic 97 46 71 Manual de usuario

Micro Innovations

Micro Innovations USB650A Manual de usuario

KTI Networks

KTI Networks KF-310 Manual de usuario

Asus

Asus SpaceLink WL230 Manual de usuario

SIIG

SIIG SC2475 Manual de usuario

TRENDnet

TRENDnet TEW-703PI Manual de usuario

Belkin

Belkin F5D7000F Manual de usuario

Pericom

Pericom PI7C7100 Manual de usuario

ADLINK Technology

ADLINK Technology cPCI-3548 Manual de usuario

Digium

Digium TE200 Series Manual de usuario

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manual de usuario

Western Digital

Western Digital FireWire PCI Adapter Manual de usuario