Conrad EC11055 Manual de usuario

Operating Instructions

PLEASE READ AND FOLLOW ALL THE INSTRUCTIONS BEFORE USING THE SOLAR LIGHT.SAVE THIS MANUAL FOR FUTURE REFERENCE.

How to Prepare for a Successful Assembly:

Read all instructions before assembly and installation. \

DELIVERY CONTENTS

1. Solar light

2. Ground spike

4. Operating instructions

5. Safety instructions

How the Solar Light Work:

The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored

in the rechargeable Ni-Mh batteries. At night, the solar light is powered by the batteries using the electricity stored

during the day. The operating time depends on geographical location, daily weather conditions, and season. For

instance, the solar light absorbs less sunlight in winter; the operating time will be reduced accordingly.

Winter Tips:

Keep debris and snow off the solar panel to allow batteries to recharge.

How to Choose a Right Location:

Install the solar light in a location with full, direct sunlight. Ensure that the installation location is away from other

nighttime light sources such as street or porch lamps. These sources may prevent solar light from automatically turning

on.

Charging the battery:

• For optimum performance, it is best to install the solar light in full, direct sunlight and let it charge for 10 to 12 hours

before the first-time use.

• Allow the light to run at least 8 to 12 entire charging and discharging cycles to reach the maximum capacity of the

battery.

How to assembly the solar light:

1. Twist and remove the top cover (A) from the housing (B) counterclockwise. Turn the switch on. (FIRST TIME USE

2. ONLY.)

3. Firmly slide the pole (C) into the solar housing (B).

4. Attach the pole (C) to stake (D).

5. Push the assembly firmly into the ground.

Problems

• The nightly runtime for the lights is short.

• The solar light does not turn on at night.

• Find no stake.

Solution

• The battery is not fully charged. Install the solar light in an area where it can receive the maximum amount of full,

direct sunlight.

• The battery is worn out. Replace the old batteries with fresh ones.

• The location is close to other light sources. Relocate the solar light or eliminate the other light sources.

• The stake maybe inserted into the pole, please check the pole.

How to replace the battery:

1. Twist and remove the housing (ⅰ) from the top cover (ⅱ).

2. Remove the battery cover (ⅲ). Replace the old battery with a fresh AA Ni-Mh 200mAh rechargeable battery.

3. Replace the battery cover (ⅲ) and the housing (ⅰ).

Technical Data:

Color temperature: 5500 K - 6000 K·

Solar panel: Polycrystalline 0,08 w/2v.

Lumen: 1.5 Im ·

Power: 0.i2 w

Rechargeable battery: 1x 1.2V NI-MH 200 mAh battery

Charging time: 8 - 10 hrs

Working time: 6- 8 hrs

Lifetime: 10000 hrs

Max lux to activate the light: 20 Lu

Ingress protection: IP44

Dimensions (Ø x H): 104 x 346 mm (with Spike)

Weight: 170 g

Tabla de contenidos

Otros manuales de Luz exterior de Conrad

Manuales populares de Luz exterior de otras marcas

Sealey

Sealey LED37 Manual de usuario

nordlux

nordlux VEJERS Guía del usuario

SImx

SImx ELITE LED LHTC637 Manual de usuario

GEV

GEV CAROLINE 10833 Manual de usuario

NEBO

NEBO NEB-LSP-0020 Manual de usuario

WE-EF

WE-EF PFL540 LED Manual de usuario

Lindby

Lindby 9949029 Manual de usuario

HEPER

HEPER DOGO Side LW6048.585-US Instrucciones de instalación y funcionamiento

HEPER

HEPER LW8034.003-US Instrucciones de instalación y funcionamiento

Maretti

Maretti VIBE S 14.6080.04.A Manual de usuario

BEGA

BEGA 84 253 Manual

HEPER

HEPER MINIMO Instrucciones de instalación y funcionamiento

LIGMAN

LIGMAN BAMBOO 3 Manual de usuario

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Manual de usuario

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Manual de usuario

urban ambiance

urban ambiance UQL1273 Manual de usuario

TotalPond

TotalPond 52238 Manual de usuario

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Manual de usuario